21
Logic Audio by Emagic / Re: emagic Logic Pro 6.5.0 beta Leak...
« Last post by Knezzen on Yesterday at 12:57:21 PM »Give it a go now! 
News:
The Mac OS 9 Lives Forum is dedicated to...
Installing, Maintaining, and Extending the functionality of Mac OS 9
Each Section can be Expanded or Compressed by clicking the Title of the section
This will shrink the Forum to display Only the Sections you want
Recent Posts
22
Software / Re: whats the deal with OS9 and BW/16color modes?
« Last post by joevt on Yesterday at 06:05:29 AM »It has nothing to do with the display and everything to do with the hardware and driver.
SheepShaver's emulated graphics device supports all color depths and resolutions in Mac OS 9.0.4.
A program shouldn't depend on a color depth unless it's using its own drawing routines.
A game that's made for the original black and white Macs, on top of requiring a black and white mode, may also require a specific resolution (512x342) and even a specific framebuffer address.
I suppose you could make an emulated framebuffer in a newer Mac and copy that buffer to the real framebuffer at 60fps (or less if that takes too much processing power). Changing the framebuffer address is probably not possible (unless you can do something tricky with virtual memory?) - it may be easier to patch the program.
SheepShaver's emulated graphics device supports all color depths and resolutions in Mac OS 9.0.4.
A program shouldn't depend on a color depth unless it's using its own drawing routines.
A game that's made for the original black and white Macs, on top of requiring a black and white mode, may also require a specific resolution (512x342) and even a specific framebuffer address.
I suppose you could make an emulated framebuffer in a newer Mac and copy that buffer to the real framebuffer at 60fps (or less if that takes too much processing power). Changing the framebuffer address is probably not possible (unless you can do something tricky with virtual memory?) - it may be easier to patch the program.
23
Logic Audio by Emagic / Re: emagic Logic Pro 6.5.0 beta Leak...
« Last post by Knezzen on Yesterday at 12:21:45 AM »Let me have a look in the settings. Sorry.
24
Hardware / QS 867 -> 933
« Last post by Jacques on Yesterday at 12:00:52 AM »Overclocked my 867 module last night and it runs really well now. Was a bit hesitant at first but so easy to do. I had a non working 9250 ATI card I scavenged a 102 1k resistor from, did the swap and all is good!
While I had the heatsink off I removed the foil strip, masked off the contact area and set to it with 600 and 1200 automotive paper. The contact surface is now almost mirror smooth and even at 933mhz the heatsink stays very cool during use with the addition of a dot of Arctic 4 paste.
Well worth doing in the end.
While I had the heatsink off I removed the foil strip, masked off the contact area and set to it with 600 and 1200 automotive paper. The contact surface is now almost mirror smooth and even at 933mhz the heatsink stays very cool during use with the addition of a dot of Arctic 4 paste.
Well worth doing in the end.
25
Hardware / Re: PSU Goo / adhesives
« Last post by Jacques on May 18, 2024, 11:53:46 PM »While i had my machine open last night I applied some rtv to the caps I had replaced. The inside of that psu is so crammed. If you are servicing / cleaning then moving the cable bundle on mine also pushes the three caps from side to side. I’m glad I put some on now. I also applied a pea sized amount touching the top only of the heat sleeve of that resistor (near the fan control board) and the top of the capacitor next to it to ensure they never come in contact again.
26
Hardware / Re: QS 867 Rev A with speaker 'hiss'
« Last post by Jacques on May 18, 2024, 11:48:21 PM »I could quite happily just disconnect the speaker I just don’t like an unsolved issue.
Thank you.
I just don’t like an unsolved issue. Thank you.
27
New Member Welcome / Re: New members intro
« Last post by slave-zeo on May 18, 2024, 10:57:25 PM »Aloha Mr. Hand.
28
Digital Audio Workstations & MIDI Applications / Re: Soundmaker 1.03
« Last post by IIO on May 18, 2024, 09:04:28 PM »will all be in the new download section (soon)
29
Digital Audio Workstations & MIDI Applications / Re: Soundmaker 1.03
« Last post by hangnef on May 18, 2024, 07:08:39 PM »Sorry, it's from Micromat (Alberto Ricci) this is where I got it:
https://www.macintoshrepository.org/2458-soundmaker-1-0-3
There's also some interesting plugins that were made available too
https://mockfuneral.github.io/2020/12/09/soundmakersoundmagicfx
https://www.macintoshrepository.org/2458-soundmaker-1-0-3
There's also some interesting plugins that were made available too
https://mockfuneral.github.io/2020/12/09/soundmakersoundmagicfx
30
Logic Audio by Emagic / Re: emagic Logic Pro 6.5.0 beta Leak...
« Last post by hoovers@dawn on May 18, 2024, 06:02:07 PM »cant upload i get this & its only 6mb stuffit .sit file...
An Error Has Occurred!
Your attachment couldn't be saved. This might happen because it took too long to upload or the file is bigger than the server will allow.
Please consult your server administrator for more information.
damn it I was getting this from my sketchy 4g service & so I upgraded to starlink! so upload speed is not the problem....tried in OS X tiger & in catilina same result??
An Error Has Occurred!
Your attachment couldn't be saved. This might happen because it took too long to upload or the file is bigger than the server will allow.
Please consult your server administrator for more information.
damn it I was getting this from my sketchy 4g service & so I upgraded to starlink! so upload speed is not the problem....tried in OS X tiger & in catilina same result??