Please login or register.

Login with username, password and session length
Advanced search  

News:

Pages: 1 [2] 3   Go Down

Author Topic: Mac Mini G4 display compatibility  (Read 16708 times)

ssp3

  • Moderator
  • 512 MB
  • *****
  • Posts: 925
Re: Mac Mini G4 + display oddities
« Reply #20 on: April 06, 2024, 07:31:23 AM »

OK, I spoke too soon: I still do not get 1920x1200@60Hz over the VGA port of the DELL U2412M monitor with the ATI Via Driver: It still only shows the option @76Hz instead, all other resolutions at @60Hz are lower. I have a small VGA-to-DVI converter on the mini side, which I always used successfully with a CRT monitor. Also, my monitor is only identified as "VGA Display" in the Control Panel, just like before, instead of "DELL U2412M". It is weird we have the same minis and monitors, yet the results were different. Different VGA-to-DVI adapters? Different VGA cables?

1. Make sure you have correct ROM / ATI Extensions / driver combination as I outlined in my previous post. Check modification dates, if in doubt.
2. Reset PRAM. Maybe even using OF commands.
3. Pull all other cables, except VGA from your display, just in case.
4. Try other adapters and VGA cables.
5. It could be that it is down to display revisions. Mine are relatively new - 2017, 2018 and 2021.


EDIT. I have a feeling that you have extensions that are fighting each other. Try the minimal set that I describe in the post below.
« Last Edit: April 06, 2024, 08:42:52 AM by ssp3 »
Logged
If you're not part of the solution, you're part of the problem.

ssp3

  • Moderator
  • 512 MB
  • *****
  • Posts: 925
Re: Mac Mini G4 + display oddities
« Reply #21 on: April 06, 2024, 07:59:19 AM »

Additional notes on my tests.

1. As can be seen from my posted screenshots, I am using only minimal set of ATI extensions to test for 2d acceleration. There are three plus driver extension, when needed.

2. darthnVader modified 3 extensions - ATI Resource Manager, ATI Graphics Accelerator and ATI 8500 3D Accelerator. And ATI Via Driver, of course.
I am leaving out ATI 8500 3D Accelerator in my tests. To spot modified extensions, check their modification dates - they are from 2018.

3. One other extension needed for graphics stuff to work is ATI Extension. It remains unmodified. I have tested several older versions (back to as far as 2001) and they all work.

4. Important! If you remove ATI Extension, but leave all other ATI extensions in place, you will get black screen. At least it happened to me when I tested with v8 ROM.
« Last Edit: April 06, 2024, 08:39:16 AM by ssp3 »
Logged
If you're not part of the solution, you're part of the problem.

ssp3

  • Moderator
  • 512 MB
  • *****
  • Posts: 925
Re: Mac Mini G4 + display oddities
« Reply #22 on: April 06, 2024, 09:55:48 AM »

Aluminium Cinema HD Displays

Testing both the 23" (1920x1200) and 20" (1680x1050) models of the display independently; the results are the same.
Both connect over a hard-wired DVI cable and are recognised as "Cinema HD" in the Monitors Control Panel.

Oh, Cinema HD Displays  8)

These two are listed in Mac Mini G4 documents as compatible, so, no surprise they're working.

OT. These are the older, non LED backlight models. How are they aging in terms of brightness, uniformity and color?
Logged
If you're not part of the solution, you're part of the problem.

RossDarker

  • 256 MB
  • *****
  • Posts: 282
Re: Mac Mini G4 + display oddities
« Reply #23 on: April 06, 2024, 04:13:20 PM »

Oh, Cinema HD Displays  8)

These two are listed in Mac Mini G4 documents as compatible, so, no surprise they're working.

OT. These are the older, non LED backlight models. How are they aging in terms of brightness, uniformity and color?

Yes they’ve always been working fine for OS 9 on the mini, just not with ‘RockHopper2 Driver’.


These matte displays are holding up well. The 23” one was bought in 2008. Having been in use since, there are these slight streaks of burn-in at the very bottom of the display, but this isn’t noticeable unless you’re looking for it with a blank background.

My 20” one is completely fine; bought this one several years ago, initially for the Mac mini in fact. Of course, it’s been used with various other computers since too. No burn in there, brightness seems to be as I remember, and the colours are fantastic on both.

Great monitors for their age!
Logged

ssp3

  • Moderator
  • 512 MB
  • *****
  • Posts: 925
Re: Mac Mini G4 + display oddities
« Reply #24 on: April 08, 2024, 11:14:24 AM »

Schlepped home another Dell display to test it with Mini. This one is higher quality version of 2212 from their "Ultrasharp" line.

Dell 22" U2212HM + 1.5 GHz Mini

Native display resolution - 1920 x 1080 @60Hz (16:9)
IPS type panel
VGA + DVI + Display Port inputs.
v8 ROM
Test conditions identical to my previous tests

1. DVI to VGA, ATI RockHopper2 Driver - black screen.

2. DVI to VGA, no driver - 800 x 600, no acceleration.

3. DVI to VGA, ATI Via Driver - max resolution, acceleration works.
Display is recognized correctly as Dell U2212HM





4. DVI to DVI, ATI Via Driver - black screen. Similar to my test with v9 ROM in the first post.

5. DVI to DVI, no driver - 1920 x 1080, no acceleration. Display is recognized as Color LCD.

6. DVI to DVI, ATI RockHopper2 Driver - max resolution, acceleration works.
Display is recognized as VGA (!) despite being connected over DVI.





As can be seen, the results are identical to those of the other version of Dell 2212.

I think that either Dell displays report to graphic chips/cards in a certain way and that's why Minis are so finicky with them or there might be a problem with Full HD 16:9 displays in general.

If anyone else is using 1920x1080 display with his Mini, please chime in.
« Last Edit: April 08, 2024, 12:05:02 PM by ssp3 »
Logged
If you're not part of the solution, you're part of the problem.

ssp3

  • Moderator
  • 512 MB
  • *****
  • Posts: 925
Re: Mac Mini G4 + display oddities
« Reply #25 on: April 18, 2024, 02:35:44 PM »

Still talking to myself..

To complement what I wrote about similar combination and OS9  >  http://macos9lives.com/smforum/index.php?topic=7048.msg54411#msg54411

Dell 22" U2212HM + 1.25 GHz Mini

Native display resolution - 1920 x 1080 @60Hz (16:9)

DVI to DVI cable.

Mini is running "naked". No DVD drive, no Mezanine, Bluetooth or AirPort boards.
Boot drive - 128GB 2.5" "stripped" Samsung SSD on a cheap JMicron adapter. (My standard setup).

OSX 10.5.8 Leopard

Boot into OpenFirmware
First attachment. One can barely see command line prompt.

Boot into Leopard
Second attachment. Same problem.

Boot into Leopard, VGA cable + adapter
Third attachment. Note the odd aspect ratio. It becomes normal when OSX drivers kick in.

It looks to me that first generation Minis have problems communicating to Full HD 1920 x 1080 displays when connected over DVI in OSX too.
At least to those manufactured by Dell. VGA adapters are OK.

This might be the real reason why Apple silently upgraded G4 Minis and their ROMs - upcoming OS and modern display compatibility!
What's the point of having digital (DVI) connection on your product, if it doesn't work with Full HD displays that are gaining popularity?  ;)

Of course, to be 100% sure, more user reports are needed !
« Last Edit: April 18, 2024, 03:46:00 PM by ssp3 »
Logged
If you're not part of the solution, you're part of the problem.

aBc

  • Staff Member
  • 128 MB
  • ****
  • Posts: 228
  • FdB•FBz•aBc
Re: Mac Mini G4 + display oddities
« Reply #26 on: April 19, 2024, 12:12:26 AM »

Of possible relevance here … per darthnVader.

Mac Mini G4 pixel clock limited to 135Mhz   / April 1, 2018
https://macos9lives.com/smforum/index.php?topic=4337.msg30099#msg30099

Quote
Display Support:   Single Display   Resolution Support:   1920x1200
Details:   The DVI video output supports digital resolutions up to 1920x1200. Apple also reports that it supports the "20-inch Apple Cinema display and 23-inch Apple Cinema HD display; supports coherent digital displays up to 154MHz; supports non-coherent digital displays up to 135MHz." VGA output (using the provided adapter) supports analog resolutions as high as 1920x1080. S-Video and composite video (to connect to a projector or TV) requires the Apple DVI to Video adapter (sold separately).


Coherent vs non-coherent is some obscure thing to do with the TMDS transmitter( on the GPU ) and the TMDS receiver in the display. The 9200 either has an issue with a weak TMDS signal with non-coherent receivers( Displays ). Or Apple crippled it, tho I doubt that.

The trouble is, no manufacturer really list that in the specs, and I doubt you'd get anyone in tech support to know what you were talking about if you did call them.

So it's really a crap shoot as to what brand and make of display will work correctly at the native res of the LCD/LED. My 1080p HDTV works fine with the Mini @720p, as the pixel clock is not over 135Mhz at that resolution.
Logged
TRY the Original MacOS9Lives theme “Blu” / via your Profile --> Look and Layout settings.

ssp3

  • Moderator
  • 512 MB
  • *****
  • Posts: 925
Re: Mac Mini G4 + display oddities
« Reply #27 on: April 19, 2024, 12:49:15 AM »

Of possible relevance here … per darthnVader.

Mac Mini G4 pixel clock limited to 135Mhz   / April 1, 2018
https://macos9lives.com/smforum/index.php?topic=4337.msg30099#msg30099

Well, the same Dell 1920 x 1080 display works just fine with 1.5Ghz Mini in OSX Leopard. ;)

Besides,
* 1920 x 1080 Dell has 148.5 MHz pixel clock
* 1920 x 1200 Dell has 154.0 MHz pixel clock.

I'm curious where does the 135 MHz figure comes from.
« Last Edit: April 19, 2024, 01:08:08 AM by ssp3 »
Logged
If you're not part of the solution, you're part of the problem.

aBc

  • Staff Member
  • 128 MB
  • ****
  • Posts: 228
  • FdB•FBz•aBc
Re: Mac Mini G4 + display oddities
« Reply #28 on: April 19, 2024, 02:47:06 AM »

I'm curious where does the 135 MHz figure come from.

Perhaps you should ask (or invite) darth to comment here?

Not quite certain what you’re really expecting from the 2005 Mac minis (with fixed 32mb or 64mb of VRAM) originally designed to work with Apple monitors. Sure, they will work with some other monitors, but not always and not at all resolutions, nor connection variants.

But I do hope you find your answers and any possible solutions. ;)
Logged
TRY the Original MacOS9Lives theme “Blu” / via your Profile --> Look and Layout settings.

ssp3

  • Moderator
  • 512 MB
  • *****
  • Posts: 925
Re: Mac Mini G4 + display oddities
« Reply #29 on: April 19, 2024, 04:15:05 AM »

Perhaps you should ask (or invite) darth to comment here?

He was last seen here almost a year ago..

Quote
Not quite certain what you’re really expecting from the 2005 Mac minis (with fixed 32mb or 64mb of VRAM) originally designed to work with Apple monitors.

I do expect them to work with more or less modern displays. Not necessarily with 4k, but at least with Full HD.
I see no point of hot-rodding these Minis - overclocking, SSD drives, copper heatsinks and so on if at the end of the day one could only connect them to old and slowly fading CCFL backlight displays, no matter of what brand.
1920 x 1080 + LED backlight is the norm today, smaller resolutions of decent quality cost extra.
Logged
If you're not part of the solution, you're part of the problem.

fergycool

  • 16 MB
  • ***
  • Posts: 25
  • New Member
Re: Mac Mini G4 + display oddities
« Reply #30 on: May 28, 2024, 01:59:42 AM »

May I just check what I'm seeing with my setup (G4 Mac Mini 1.5Ghz with a Dell 2407WFP). TLDR: I do not see a black screen with 1920x1200 on DVI but rather a corrupted display.

After playing I can only do 1920x1080@60Hz with DVI but all the way up to 1920x1200@60Hz with DVI<>VGA adaptor.

If I try to increase the resolution past 1920x1080 on DVI then I just get a corrupted screen (as seen in second attachment, the first being 1920x1080).

I've got the drivers as listed here:
http://macos9lives.com/smforum/index.php?topic=2408.msg47160#msg47160

That is the v9 build, then the base set of @rockHopper@ then then modified Rockhopper driver.
Thanks Ferg
Logged

IIO

  • Staff Member
  • 4096 MB
  • *******
  • Posts: 4671
  • just a number
Re: Mac Mini G4 + display oddities
« Reply #31 on: May 28, 2024, 05:00:42 AM »


Sure, they will work with some other monitors, but not always and not at all resolutions, nor connection variants.


i will never understand why some monitors work with a certain GPU drivers and others not, and i know that i am really lucky that i´ve chosen a mass product which seems to work under any conditions.

the pictures from ssp look like the cable or adaptor would be wired wrongly, but the resolution was supported?
Logged
insert arbitrary signature here

fergycool

  • 16 MB
  • ***
  • Posts: 25
  • New Member
Re: Mac Mini G4 + display oddities
« Reply #32 on: May 28, 2024, 05:06:56 AM »


Sure, they will work with some other monitors, but not always and not at all resolutions, nor connection variants.


i will never understand why some monitors work with a certain GPU drivers and others not, and i know that i am really lucky that i´ve chosen a mass product which seems to work under any conditions.

the pictures from ssp look like the cable or adaptor would be wired wrongly, but the resolution was supported?
Good point. I never even thought to try a different DVI cable. I will give that a go!
Logged

fergycool

  • 16 MB
  • ***
  • Posts: 25
  • New Member
Re: Mac Mini G4 + display oddities
« Reply #33 on: May 28, 2024, 05:41:20 AM »


In my case, I have a DELL U2412M, it's a 16:10 aspect ratio, 24", 1920x1200 @60Hz monitor. Used with the 1.5GHz Mac mini G4 (AKA "Super mini") model.

After using these ATI Extensions, which are different from what's on both v8 and v9, I got it to recognize a lot of resolutions and frequencies, via DVI. Even 1920x1200, but only @ a frequency higher than 60Hz. But my monitor is limited to 60Hz maximum. I get a black screen if I try such higher frequencies. However, at 60Hz, I do have the option to use 1600x1200 still, which is 4:3, and it just adds some black borders to the side, but otherwise it's a pixel-native resolution that works well, as long as I configure my monitor to display everything with a 4:3 aspect ratio.
Sorry I thought I had read this topic thoroughly but missed this. This is the same issue I see. The Dell 2407WFP will only do 1920x1200@60Hz, but that resolution is not listed. So on DVI at least I am limited to 1920x1080@60 or 1920x1200@76Hz
Logged

ssp3

  • Moderator
  • 512 MB
  • *****
  • Posts: 925
Re: Mac Mini G4 + display oddities
« Reply #34 on: May 28, 2024, 02:34:52 PM »

Sorry I thought I had read this topic thoroughly.

Then read it again! Conditions similar to yours were described, three working solutions were found.
« Last Edit: May 28, 2024, 11:54:22 PM by ssp3 »
Logged
If you're not part of the solution, you're part of the problem.

fergycool

  • 16 MB
  • ***
  • Posts: 25
  • New Member
Re: Mac Mini G4 + display oddities
« Reply #35 on: May 29, 2024, 02:01:07 AM »

Sorry I thought I had read this topic thoroughly.

Then read it again! Conditions similar to yours were described, three working solutions were found.

I did read it again! That's what I just said.

As I previously said DVI/VGA to VGA works fine at the higher resolution (that's one of your solutions right?). What I was trying to ask (forgive me if I was unclear) but from what I can gather if it does not work people are seeing a blank screen. I instead see a corrupted screen. Is that what other people see?
Logged

Jubadub

  • 256 MB
  • *****
  • Posts: 451
  • There is no Mac in OS X
Re: Mac Mini G4 + display oddities
« Reply #36 on: May 29, 2024, 02:22:05 AM »

I instead see a corrupted screen. Is that what other people see?

I used to have that issue in 2019 on an LED (and thus lame) Samsung full HD monitor I used to have back then. I forgot how I got past the issue. Perhaps I tried different adapters, and/or GPU drivers, and/or video cables.

Everything was somewhat identifiable visually, but unreadable and ugly. Is that your issue?
Logged

fergycool

  • 16 MB
  • ***
  • Posts: 25
  • New Member
Re: Mac Mini G4 + display oddities
« Reply #37 on: May 29, 2024, 02:39:30 AM »

Thanks a lot. That is what I see too.
I've tried many different DVI<>DVI cables but all show the same. I do have a few other monitors that I should try.
Logged

ssp3

  • Moderator
  • 512 MB
  • *****
  • Posts: 925
Re: Mac Mini G4 + display oddities
« Reply #38 on: May 29, 2024, 08:22:08 AM »

As I previously said DVI/VGA to VGA works fine at the higher resolution (that's one of your solutions right?).

Yes, that is correct. Either with v9 ROM + unpatched ATI extensions or with v8 ROM + patched ATI extensions.

Quote
What I was trying to ask (forgive me if I was unclear) but from what I can gather if it does not work people are seeing a blank screen. I instead see a corrupted screen. Is that what other people see?

I think I wrote black screen, not blank screen. (Did I make a mistake somewhere?)

What happens with more or less modern Dell displays is that, when display doesn't like the incoming signal, it goes black and warning pop-up appears.
Since your Dell is earlier model (ca. 2007, CCFL backlight, if I'm not mistaken), it could be that disabling incompatible incoming signal was not implemented in display's firmware yet and users simply got distorted picture instead.
Logged
If you're not part of the solution, you're part of the problem.

fergycool

  • 16 MB
  • ***
  • Posts: 25
  • New Member
Re: Mac Mini G4 + display oddities
« Reply #39 on: May 30, 2024, 08:41:17 AM »

TBH I wasn't sure there's a difference between a blank screen and a black one. But you sound right about the cause of the screen corruption.

I did finally get 1920x1200 working this morning. I saw a comment about using DVI>HDMI>DVI (sorry as I cannot remember where). I have a DVI > HDMI cable, but not an adaptor for the other end. But I borrowed a female HDMI > DVI adaptor.  I can confirm that it works and I can select the 1920x1200x76Ghz resolution without any screen corruption.
Logged
Pages: 1 [2] 3   Go Up

Recent Topics