Topic: Giga Designs G-Celerator G4/1.467 AGP/133 (5-1214Q) (Read 5030 times)

smilesdavis · « **on:** June 21, 2025, 02:47:52 AM »

https://web.archive.org/web/20131024222326/http://www.gigadesigns.com/eproducts/Giga%2520Designs%2520Updater%25203.0.1.pkg.zip

is dead

and there is a CD that has to be inserted as well during installation

anyone ever came across this?

because even on 68kmla links are down

indibil · « **Reply #1 on:** June 22, 2025, 02:52:02 AM »

I don't know if I have it, but if you want to patch the firmware, you can use the one from Newertech. I always apply the Newertech patcher, which includes 7457, 7447, and 7448.

https://www.macintoshrepository.org/8007-powerlogix-newertech-g4-enabler

smilesdavis · « **Reply #2 on:** June 22, 2025, 04:04:58 AM »

I dunno what i need yet

i just removed hdds and cleaned all of my 30? powermacg4s with a compressor and removed the original HDD in it

[Off Topic]	What did you do with your PowerPC Mac today? by smilesdavis	Yesterday at 11:10:58 AM
[Off Topic]	Music Faves by jojo2k	Yesterday at 07:57:27 AM
[Hardware]	Powerbook for OS9 and SVP by BimmyLee	August 29, 2025, 09:53:37 PM
[Hardware]	MDD Freeze / J20 RAM Slot by aBc	August 29, 2025, 07:41:14 PM
[Hardware]	G4 MDD only boots using ADC monitor power button by smilesdavis	August 29, 2025, 09:31:06 AM
[Hardware]	Rev A/B iMac Freezes on Startup by keithiepoo	August 28, 2025, 04:42:38 AM
[Off Topic]	Power Use by torvan	August 27, 2025, 11:01:40 PM
[Mac OS 9, Hacks & Upgrades]	help my b+w g3 450 is haunted! upgrading from 8.6 to 9.0 fine but 9.1 ruins it by DieHard	August 27, 2025, 04:50:57 PM