Hi,
I allready submitted a post in the topic about M-Audio interfaces as that was the post which led me to this forum.
I'm based in the Netherlands and am a MacOS9 user since 2001. At first with a PowerPC8500 with a newertech G3 CPU card, then moved to a 9600 with the transplanted CPU card. I used that setup until about 2012. I also installed OSX on it but it ran buggy and I didn't enjoy that much.
In 2004 I bought an iBook Clamshell (first series) which also lives today. I recently exchanged the HDD with an Msata to IDE interface with an msata SSD. I also maxed out the RAM with 512MB expansion. The iBook now runs MacOS 9.2.1 and MacOS 10.3 (This wasn't usable with an HDD)
In 2012 I decided it was time to upgrade my system and I bought the last series of G4 MDD which was produced, because it is able to run MacOS9 and also added a G5 in the same week.
The G5 has died a few years ago due to cooling issues/leakage which killed the PSU.
I didn't bother to repair it as I moved over to windows for work purposes (I'm an IT system administrator)
The MDD however still lives on today., I kept it because of my Canon SCSI filmscanner which only runs with OS9.
Recently i wanted a Mac back and I ended up with a MacMini late 2012 as this is the last one with build-in firewire. I installed it with MacOS 10.9.5 (mavericks) To me it's just about the sweetspot in modern usages as well as compatibility with older software.
Why did I need firewire? I use an M-Audio firewire Audiophile sound card, which I used with my MDD for record analog material (Like vinyl) and I'm not a fan of the build-in audio from the computers.
For my MacMini I bought Cubase 7.5 with USB dongle, which runs perfectly.
I added a second M-Audio in my setup and connected midi between the two computers.
On My MDD I use the the native instruments FM7 synth.
This setup does work with MacOSX, but I struggle to get midi working in MacOS9.
I also have an Edirol UA-25 unit with which I have similar results.
With the M-Audio I now get a "midi received" message when I sent it out via Cubase
where the Edirol unit isn't detected in OMS. I think I will put a question for that in the corresponding topic.
Here is my current collection:
Mac MDD 1,25GHZ single MacOS 10.5.8 + MacOS9.2.2
Mac AGP 450Mhz (MacOS 10.4.11 , MacOS 10.2.8, MacOS 9.2.1)
iBook Clamshell (MacOS 10.3.8 , MacOS9.2.1)
PowerMacG5 (defective)
Powerbook 5300 (broken due to brittle plastics about 3 months ago)
Canoscan 2700F film scanner (SCSI MacOS9 only)
Umax astra 1200s
2x M-Audio firewire Audiophile audio interface
1x Edirol UA-25 USB audio interface
Well that's it for the moment
greets
Marcel