Please login or register.

Login with username, password and session length
Advanced search  

News:

Pages: [1]   Go Down

Author Topic: Mac Mini G4 Interconnect Boards (2 Revisions), may cause booting to OS9 issues  (Read 4328 times)

FBz

  • 512 MB
  • *****
  • Posts: 666
  • Fury-Fungus FdB/FBz

During the course of testing alternative adapters for the Mini (more on that later)
found that there may be at least two different Interconnect boards in the Minis.
After failure getting a newly formatted and OS 9.2.2 - installed SSD to boot
(using the top board ©2004 - pictured below) pulled the SSD and then with
an RXD adapter newly attached, placed into a Quicksilver and it booted the QS!

Afterwards noticed the differences between these two Interconnect boards.

While the top board has more contacts merged / joined (even three more sets
of them on the backside). Changed SSD and new test adapter back to the ©2005
Interconnect board and the Mini then booted without issue.

Backside pic:
https://www.ebay.com.au/itm/Apple-Mac-Mini-G4-Interconnect-Board-820-1660-A-2004-/264483865489

So, if you’re having difficulties booting a Mini after the OS 9.2.2 install, you may
want to check to see if you’ve got this 2004 Interconnect board and just how many
of the contacts may be merged / joined. Assume that this is the case with the very
early G4 Mini’s and especially the 1.25 GHz models.
(References note: in 1.42 GHz models too.)

Apple part numbers:
630-6581 and 630-7099 / 820-1660-A and 820-1838-A

*clickable image
« Last Edit: May 03, 2021, 09:49:15 AM by DieHard »
Logged

DieHard

  • Staff Member
  • 2048 MB
  • ******
  • Posts: 2418
Re: Mac Mini G4 Interconnect Boards (2 Revisions)
« Reply #1 on: May 03, 2021, 09:48:49 AM »

I split this off into a new topic since it may become a very important issue;
obviously, we need to breakdown the differences on these (2) boards eventually

If you have a 2004 board, please report your success or failure loading OS9, and any glitches
Logged
Pages: [1]   Go Up

Recent Topics