Please login or register.

Login with username, password and session length
Advanced search  

News:

Pages: [1]   Go Down

Author Topic: question re: usb serial adapters + software dongles  (Read 23525 times)

macStuff

  • Guest
question re: usb serial adapters + software dongles
« on: August 23, 2018, 09:15:25 AM »

this is slightly leaning towards the pc side of things
please forgive
but im curious
does anyone know if USB to Serial 9pin adapters would work for my logic Serial dongle?
i saw somewhere else on the net syntho was asking about if the pc serial dongle would work to authorize the mac version of the app
im curious about this aswell as i have the pc platinum serial dongle sitting here in front of me

ive never tried any real "serial" to usb via adapters before
i dunno i guess i kind of figured it would be a waste of time?
but im curious to know if anyone has any experience with using seerial to usb adapters? if at all?
or in combination with software dongles (and/or midi interfaces?)
Logged

DieHard

  • Staff Member
  • 2048 MB
  • ******
  • Posts: 2413
Re: question re: usb serial adapters + software dongles
« Reply #1 on: August 23, 2018, 09:43:33 AM »

I can tell you that many "CISCO" technicians that try USB to serial adapters give up and buy old notebooks to manage legacy Cisco equipment.  I have not seen the adapters work well, yet some say they are usable for their needs... go figure
Logged

macStuff

  • Guest
Re: question re: usb serial adapters + software dongles
« Reply #2 on: August 23, 2018, 11:01:11 AM »

yes i have a friend that says the same.. but i look at him  like hes got two heads when he says sch things lol
Logged

Metrophage

  • 128 MB
  • ****
  • Posts: 192
Re: question re: usb serial adapters + software dongles
« Reply #3 on: August 23, 2018, 12:57:37 PM »

USB is always a last resort for me. I'd just install a proper serial port.

How I see it is that serial data is reliable because it arrives on time. If I wanted fast transfer of bulk data, I would use a protocol/medium optimized for that instead. What I have always hated about USB is that it was devised as a "good enough" compromise to do both of these things, but does neither of them better than anything else. Also, I hate the flimsy connectors. The only good thing about USB has ever been that is cheap.
Logged

vectrex

  • 32 MB
  • ***
  • Posts: 63
  • new to the forums
Re: question re: usb serial adapters + software dongles
« Reply #4 on: August 23, 2018, 04:35:41 PM »

Look for FTDI chipset based usb to serial devices. avoid Farallon or other cheaper generic chipsets. You will have to do some research, but the manufacturer should be specific in listing these details.

I have never used these types of devices in OS9, but I would imagine they would work just the same, worth a shot.

Another advantage of FTDI is that they list drivers for OS 9 here at the bottom:

http://www.ftdichip.com/Drivers/VCP.htm

The download seems to work, haven't tried installing myself.

In OS X, ive had quite a bit of success with FTDI based usb to serial devices for doing things like file transfer to my Apple IIe via ADTPro, communicating with Arduino and other serial devices...etc.

Hope this helps.


Logged

vectrex

  • 32 MB
  • ***
  • Posts: 63
  • new to the forums
Re: question re: usb serial adapters + software dongles
« Reply #5 on: August 23, 2018, 05:22:13 PM »





Just ran a quick test in OS 9 with an FTDI USB to serial cable with the drivers I linked above.

Used Max/MSP 4.1 to probe the serial connection as a way of testing, as you can see it is working well and the serial output blinks each time I click to send the message.
Logged

DieHard

  • Staff Member
  • 2048 MB
  • ******
  • Posts: 2413
Re: question re: usb serial adapters + software dongles
« Reply #6 on: August 24, 2018, 08:18:52 AM »

WTF !   This is definitely VALUABLE info. and we need to sticky this !  Working Serial over USB is OS 9.... I am still amazed
Logged

Metrophage

  • 128 MB
  • ****
  • Posts: 192
Re: question re: usb serial adapters + software dongles
« Reply #7 on: August 24, 2018, 03:50:54 PM »

I assumed that this was common knowledge, those FTDI drivers have been around since the beginning. Once I get my Mini set up, I am going to try installing a modem serial port in it for MIDI. But if that doesn't work out my backup plan has been to use the FTDI driver and Firmata on an Arduino and Max.
Logged

coachla

  • 128 MB
  • ****
  • Posts: 170
Re: question re: usb serial adapters + software dongles
« Reply #8 on: August 26, 2019, 01:54:20 AM »

I assumed that this was common knowledge, those FTDI drivers have been around since the beginning. Once I get my Mini set up, I am going to try installing a modem serial port in it for MIDI. But if that doesn't work out my backup plan has been to use the FTDI driver and Firmata on an Arduino and Max.

Keyspan USB/serial devices work well for MIDI on Mac  OS9, though I use the SXPro. I agree with Metrophage. USB is a one lane tunnel, and can't  compare to serial with  regard to jitter and latency.
Logged

macStuff

  • Guest
Re: question re: usb serial adapters + software dongles
« Reply #9 on: January 10, 2020, 08:14:02 AM »

how does any of that relate to using PC dongles for Mac apps?
Logged

cyberish

  • 128 MB
  • ****
  • Posts: 133
  • new to the forums
« Last Edit: March 14, 2022, 04:01:29 PM by cyberish »
Logged

cyberish

  • 128 MB
  • ****
  • Posts: 133
  • new to the forums
Re: question re: usb serial adapters + software dongles
« Reply #11 on: March 14, 2022, 03:33:52 PM »

I've got hold of a mini iDock and the drivers for Mac OS9 are here:
(still testing) - Does anybody know which chip is used in there? - Was there a Mac OS X driver working with it?

https://web.archive.org/web/20020603223007/http://newmotiontech.com/products/mini_idock.html

https://web.archive.org/web/20030209182236/http://www.poleposition-sw.com/iDock/

It works with a Cypress chipset.
There is a MacOS X driver which was never officially released.
Below are the drivers for Mac OS 8.5 to 9.2.2 and the alpha preview for Mac OS X (10.3/10.4)

« Last Edit: March 14, 2022, 04:04:52 PM by cyberish »
Logged
Pages: [1]   Go Up

Recent Topics