Please login or register.

Login with username, password and session length
Advanced search  

News:

Pages: [1]   Go Down

Author Topic: Powermac G4 Quicksilver won’t turn on  (Read 5827 times)

mattemangia

  • 1 MB
  • *
  • Posts: 1
  • New Member
Powermac G4 Quicksilver won’t turn on
« on: August 25, 2017, 03:19:14 AM »

Good Mormont from Italy! ;)
I hope someone can help me with my little problem. Recently I discovered a powermac G4 Quicksilver in a flea market. The psu was dead, even with the Green pin trick it won’t work. Now the thing is.. I’ve bought an atx psu, and I changed the connector following a simple tutorial on the net.. the powermac is not turning on: the power button isn’t working, neither a bridge between the power pin on the mobo. The pmu battery is new. The only way I can turn the mobo on is by making a bridge between COM and POWER pin on the molex connector, but doing so won’t start the processor (the screen stays black and no chime). I’ve pulled out the processor board, but there aren’t signs of burn.

Someone with more experience than me could help, please?  :-\ I don’t want to throw it in the garbage..  :'(
Thank you in advance
Logged

reeskm

  • 32 MB
  • ***
  • Posts: 32
  • new to the forums
Re: Powermac G4 Quicksilver won’t turn on
« Reply #1 on: September 29, 2017, 11:44:18 AM »

Hope you haven't thrown it away yet!

Just out on a limb here, but if you tried using a PC ATX power supply, it may not turn on because it might use a different way of triggering power on through the ATX power connector to the mainboard. In other words, the motherboard 24pin ATX connector might not have the same pin-out as the Quicksilver's original PSU.

"The Power Mac G4 MDD Used a uniquely shaped 344W or 400W AcBel or Samsung Power Supply. It had a 24-Pin Connector (not 24-Pin ATX!)" See https://www.ifixit.com/Guide/Power+Mac+G4+MDD+Power+Supply+Replacement/1622
(I know you do not have a G4 MDD but the principle is the same)

I would recommend ordering a replacement PSU off eBay or a mac parts reseller that supplies older parts. Maybe someone here on the forums has a spare PSU you could buy?

Don't throw it out yet! It seems to have a 1 GHZ dual processor! That sounds like a great second hand machine.
Logged

reeskm

  • 32 MB
  • ***
  • Posts: 32
  • new to the forums
Re: Powermac G4 Quicksilver won’t turn on
« Reply #2 on: September 29, 2017, 11:55:25 AM »

Just found this!

Crazy hacking, but it works! This is what you need to do, if you don't want to order a replacement AC Bell power supply.

http://www.applefritter.com/?q=node/23857
Logged
Pages: [1]   Go Up

Recent Topics

[Audio & MIDI Hardware] Problems with mini din 8 serial ports and MIDI interfaces by GaryN Yesterday at 02:35:56 PM
[Hardware] MDD Freeze / J20 RAM Slot by aBc Yesterday at 01:33:08 PM
[Hardware] Can't identify expansion card by IIO November 12, 2025, 11:44:47 PM
[Mac OS 9, Hacks & Upgrades] Probably a silly question, but by IIO November 11, 2025, 01:37:03 AM
[Hardware] PowerMac g4 MDD CPU error in OS 9 and other issues by aBc November 10, 2025, 03:35:29 PM
[New Member Welcome] HI, from Italy by makott November 10, 2025, 04:37:45 AM
[Audio & MIDI Hardware] Looking for M Audio 2496 drivers by G40 November 09, 2025, 11:18:54 AM
[News, Information & Feedback] Support Mac OS 9 Lives - Paid subscriptions by Knezzen November 09, 2025, 01:58:18 AM