Please login or register.

Login with username, password and session length
Advanced search  

News:

Pages: [1]   Go Down

Author Topic: -6042 error | Apple Multiprocessor Fix (For Pro Tools 5.1.x)  (Read 11859 times)

supernova777

  • Guest

http://archive.digidesign.com/download/mp/

Quote
This download is for anyone wishing to use Pro Tools on Multiprocessor Apple G4 computers such as:

G4 450mhz DP gigabit/mystic (req 9.1)
G4 500Mhz DP gigabit/mystic (req 9.1)
G4 533Mhz DP Digital Audio (req 9.1)
G4 800Mhz DP Quicksilver (req 9.2.2)
G4 867Mhz DP MDD  (req 9.2.2)
G4 1.0Ghz DP Quicksilver (req 9.2.2)
G4 1.0Ghz DP MDD (req 9.2.2)
G4 1.25Ghz DP MDD (req 9.2.2)


Quote
Download Includes:

    ApplePCI (system extension)
    ApplePCI Read Me (this document)

Installation Instructions: To install this download, just drag it to the System Folder/Extensions folder and restart your computer.
Logged

P.O.

  • 128 MB
  • ****
  • Posts: 165
Re: -6042 error | Apple Multiprocessor Fix (For Pro Tools 5.1.x)
« Reply #1 on: May 11, 2015, 05:59:50 PM »

It seems they took notice people were visiting this page, so they pulled the plug on the download.. just went there and got:
Error - file not found, please let us know by emailing [email protected]
Logged

supernova777

  • Guest
Re: -6042 error | Apple Multiprocessor Fix (For Pro Tools 5.1.x)
« Reply #2 on: May 11, 2015, 06:19:26 PM »

The filename is "ApplePCI.hqx"
http://www.magma.com/store/productpdfs/drivers/files/PCI/ApplePCI.img.hqx <-also dead

http://web.archive.org/web/20101126085410/http://magma.com/store/productpdfs/drivers/files/PCI/ApplePCI.img.hqx
^ works

the post here:
https://groups.google.com/forum/#!topic/macos9/7drB2JtNKs8
reading his interpretation he seems to think u can keep your multiprocessors enabled if u add this extension??

Quote
I have just acquired a Digidesign AudioMedia III PCI card and the Pro
Tools software to go with it. I am hoping to use this setup with a
dual processor 1.25 GHz G4 MDD, but there is a problem. According to
the Avid/Digidesign website, if you try to use this setup with a dual
processor G4 you are likely to experience -6402 errors unless the
Multiprocessor folder is removed from the Extensions folder, so
disabling the second processor. That's a pain, as the extra CPU power
would obviously be a great help when working with large audio files.

<http://archive.digidesign.com/download/mp/>

The answer is an extension called ApplePCI, info about which can be
found at the above URL. Unfortunately, clicking on the 'I Accept' link
to the download is a dead end. Since there's an Apple End User Licence
attached to the above web page, it seemed reasonable to assume this
extension might be found on and be freely downloadable from Apple's
Developer site, but I couldn't locate it there or anywhere else at
Apple. Googling only turned up the above link.

So, does anybody have a copy of this extension they could send me?

Thanks in advance.

Roger
« Last Edit: May 11, 2015, 06:39:42 PM by chrisNova777 »
Logged

supernova777

  • Guest
Re: -6042 error | Apple Multiprocessor Fix (For Pro Tools 5.1.x)
« Reply #3 on: May 11, 2015, 06:40:51 PM »

It seems they took notice people were visiting this page, so they pulled the plug on the download.. just went there and got:
Error - file not found, please let us know by emailing [email protected]

are u downloading it because u have a dual processor g4? or because u experienced the 6042 error?
(or both?)
Logged

mrhappy

  • 1024 MB
  • ******
  • Posts: 1156
  • new to the forums
Re: -6042 error | Apple Multiprocessor Fix (For Pro Tools 5.1.x)
« Reply #4 on: May 12, 2015, 06:45:23 AM »

It was unclear to me if this 'fix' was for ANY multiprocessor use or while using a multiprocessor WITH an expansion chassis??
Logged

P.O.

  • 128 MB
  • ****
  • Posts: 165
Re: -6042 error | Apple Multiprocessor Fix (For Pro Tools 5.1.x)
« Reply #5 on: May 12, 2015, 07:36:38 AM »

Quote
It was unclear to me if this 'fix' was for ANY multiprocessor use or while using a multiprocessor WITH an expansion chassis??

neither. It's just in prevention: I do have a dual processor G4 I want to setup for protools. And I know that with that kind of stuff you're better get hold of it before it dissapears forever...
Logged

supernova777

  • Guest
Re: -6042 error | Apple Multiprocessor Fix (For Pro Tools 5.1.x)
« Reply #6 on: May 12, 2015, 10:00:17 AM »

It was unclear to me if this 'fix' was for ANY multiprocessor use or while using a multiprocessor WITH an expansion chassis??

its for both.. this + that  8)
Logged

mrhappy

  • 1024 MB
  • ******
  • Posts: 1156
  • new to the forums
Re: -6042 error | Apple Multiprocessor Fix (For Pro Tools 5.1.x)
« Reply #7 on: May 12, 2015, 10:32:36 AM »



its for both.. this + that  8)

That's what I was thinking... I've been using 'this' AND 'that' but haven't been getting -6042's... I DO get some other random errors now and again and whenever that occurs I wonder if the multi is causing a prob. Will be porting the whole mess over to a single MDD 1.25 before long so I haven't been too worried about it, as I'm sure some OTHER issues will crop up!! ;D
Logged
Pages: [1]   Go Up

Recent Topics