Please login or register.

Login with username, password and session length
Advanced search  

News:

Pages: [1]   Go Down

Author Topic: 20 Mixing Tips (june 1998 SOS)  (Read 5556 times)

supernova777

  • Guest
20 Mixing Tips (june 1998 SOS)
« on: March 10, 2015, 12:14:32 AM »

http://www.soundonsound.com/sos/jun98/articles/20tips.html

Quote
PAUL WHITE delivers a crash course in instant mixing.

The vocals sound great, the drums are really kicking and the guitars are exceptional, but put it all together and what have you got? A mess! Sound familiar? Until you've gained plenty of experience in mixing music, the process can seem very frustrating. There are probably as many correct ways to tackle a mix as there are successful engineers and producers. Even so, I've taken 20 tips that I've found to be helpful over the years and presented them below in the form of a checklist. These are not immutable rules, just general guidelines that can be broken any time you feel you can get away with it. Have fun!


  • Put the mixer into neutral (EQ flat, aux sends down, routing to Left/Right only and so on), before you start work and pull down the faders on any channels not in use. Make sure all unused aux sends are set to zero and that unused mixer channels are unrouted as well as muted, as this will further reduce the level of background noise. If you don't do this, you may find effects on tracks that don't need effects, or unwanted tracks creeping into a bounce due to a routing button being left down. You should also have a track sheet for your recording from which you can label the mixer channels. The time-honoured way to do this is to use masking tape and felt pen, so that you can peel the whole lot off when the job is finished.
  • Optimise the gain settings not only for the multitrack returns, but also for all effects sends and returns and for your external effect units. Also ensure that your master recorder is being driven as hard as possible, without overloading on signal peaks. These simple measures can significantly improve the clarity of your mix. If your recording is going to be digitally edited, leave any fade-outs until the edit stage, and don't try to chop off the noise that precedes or follows the mix -- you may need this when setting up a digital denoiser that requires a bare noise 'fingerprint' for calibration purposes.
  • Subgroup logical sections of your mix, such as the drum kit or the backing vocals, so that you can control the overall level of the subgrouped elements from a single fader or stereo pair of faders. This allows you to control the mix using fewer faders, and fewer fingers! Be aware that any channels subgrouped this way must also have their effects routed to the same groups(s), otherwise the effects level won't change as you adjust the group fader.
  • etc ... (click link) above
Logged

mrhappy

  • 1024 MB
  • ******
  • Posts: 1156
  • new to the forums
Re: 20 Mixing Tips (june 1998 SOS)
« Reply #1 on: March 10, 2015, 07:07:10 AM »

A lot of good 'meat and potato' advice there! ;D
Logged

mrhappy

  • 1024 MB
  • ******
  • Posts: 1156
  • new to the forums
Logged
Pages: [1]   Go Up

Recent Topics