Author Topic: reaktor 2  (Read 9463 times)

supernova777

  • Guest
reaktor 2
« on: July 22, 2014, 08:23:28 PM »
http://www.soundonsound.com/sos/oct99/articles/reaktor.htm


Quote
   System Requirements    
     As with all software synths, the more processing power you have the better -- it's not that you can't run Reaktor on a Pentium 233MHz machine (you can), but that you will manage more notes and simultaneous sounds with a faster one. The minimum system requirements for the Mac are OS 7.6.1 or higher, PPC 603 120MHz, and 32Mb RAM, while OS 8.01 or higher, PPC 604 233MHz and 64Mb are recommended. For the PC you can use Windows 95/98 or NT 4.0, with a minimum of a Pentium 133MHz and 32Mb RAM; a Pentium 233MHz and 64Mb RAM are recommended.

It's also worth pointing out some of the other issues before you start waving your credit cards about. The choice of soundcard can be crucial to your long-term enjoyment -- some offer low latency to give an almost 'instant' keyboard response, while others can make playing software synths from a keyboard feel like wading through treacle. This depends largely on the soundcard driver design, and cannot always be predicted. Any Instrument or Ensemble can be used to try out Reaktor's real-time performance -- optimise the Play Ahead setting for your particular soundcard by reducing it until you start to get audio clicks and breakup when playing in real-time, and then edge it back up to the next higher setting.

My Gina card worked on the lowest 10mS setting, and playing Reaktor from a MIDI keyboard felt very responsive, but other cards may not prove so successful. Thankfully NI have a list of 'approved' soundcards on their web site, but this is not exhaustive, and may change as new soundcard drivers are released. However, NI also provide downloadable demo versions of their software, and apart from giving you a taster of the sounds on offer, these will also let you try out the programs with your own soundcard to see how it performs.

Offline WhiteWarlock

  • Enthusiast Member (25+ Posts)
  • ***
  • Posts: 92
  • SynthWizards/N01ZE
    • SynthWizards
  • Liked:
  • Likes Given: 0
Re: reaktor 2
« Reply #1 on: June 02, 2018, 10:12:26 AM »

Native Instruments Reaktor 2.0
Software Synth/sampler
Published in SOS October 1999

NATIVE INSTRUMENTS REAKTOR
pros
   Huge range of sounds and possibilities.
   Lots of finished Ensembles and Instruments for the casual user.
   Regular new downloadable designs available on the web site.
cons
   Needs a fast processor to fully exploit the possibilities.
   Latency is very dependent on individual soundcard drivers.
   Creating instruments from scratch requires a lot of dedication.
summary
An awesome application for real-time synthesis and sampling of many kinds. It will work on slower computers, but those with more powerful machines will have bigger smiles on their faces.

The design team at Native Instruments have certainly been busy since I reviewed their Generator 1.5 PC software synth back in the September '98 issue of SOS. This ambitious modular design allowed you to assemble up to 16 different instruments, each with up to 64 voices, and control them via MIDI. The sounds were created entirely by the software, using 32-bit real-time signal processing and sample rates from 22kHz to a rather academic 132kHz. Native Instruments have now updated Generator to version 2.0, and introduced two completely new products, Transformator and Reaktor -- both also launched as version 2.0 to keep the product range in sync. And as if that wasn't enough, they've also ported all three to the Mac.

Transformator 2.0 is a stand-alone program that provides sampling and granular synthesis with up to 16 instruments, each with up to 64 voices and controllable by MIDI. Reaktor 2.0, the program under review here, combines the features of both Generator and Transformator, giving a single application capable of both oscillator-based synthesis, sampling and granular synthesis -- a powerful combination indeed. Existing owners of Generator can upgrade to the new models as well.

Understanding The NI User Interface

One of the beauties of the user interface that NI use across all their products is that you can work at various levels. At the heart of every design is a collection of Modules, which provide basic functions such as oscillators, filters, and amplifiers. These can be connected using virtual patch cords to build an instrument to any specification you like, as long as your computer is powerful enough to run it. This process is exactly the same as setting up a patch on a modular analogue synth, although NI go way beyond most hardware synths by providing several hundred Modules (there are 35 oscillators alone!). For those who want to create sounds that are a little different from the norm, there are also logic gates, slew limiters, parabolic shapers -- even individual knobs, switches, faders and LED Modules are provided.

However, to prevent every user having to re-invent the wheel, a separate selection of ready-built Macros is also available. If, for instance, you want to use a Minimoog-style oscillator that has switched triangle, variable pulse width, and sawtooth waveforms, along with Course and Fine pitch controls, you'll find that the Osc3wave Macro does just this, and will save you a huge amount of design time (it contains 12 Modules). Several hundred Macros are supplied in the library, including mixers, a choice of 17 envelope generators, step sequencers, microtonal scale tuning... the list goes on and on. Using a Macro also removes much of the donkey work involved in connecting more basic Modules, since all the boring bits such as attaching knobs or sliders to the Module terminals is also done for you (more on these controls in a moment).

When several Modules are connected together in a window on screen, they form a Structure. This concept can initially be confusing, since Macros also have their own Structures that can be opened in a further window, but as long as you remember that the Module is the simplest item on offer it becomes clearer. The Structure windows are where you connect everything together using virtual patch cords by dragging the mouse from one connection point to another on a different Module.

Once you have a completely functioning Structure of Modules or Macros (with suitable connections for MIDI control at one end and an audio output at the other) it becomes an Instrument, and gets its own front Panel. This is where the knobs, sliders, switches, and indicators appear, and you can drag and drop these in the Panel window as you wish to design your own graphic interface. By assigning controls to MIDI controller numbers, real-time automation is also possible.

Each Instrument is self-contained, but you can set up several Instruments for multitimbral operation in an Ensemble window -- the highest level in the NI interface. Many ready-to-use Ensembles are supplied with
     All To Good Effect    
     As with all new MIDI synths, people tend to judge products by their presets. Generator was provided with a wide range of finished Ensembles -- and since the available Modules included delays and filters, it was also possible to design effects that could be added to the basic synth sounds. A wide variety of effect 'Instruments' such as chorus, flanging, and panning were included to add the finishing touches.

http://www.n01ze.com/synthwizards/ARKIVE/REAKTORMAKER.SIT
http://www.n01ze.com/synthwizards/ARKIVE/REAKTOR23_.SIT
http://www.n01ze.com/synthwizards/ARKIVE/REAKTOR_231_.SIT
Does anyone around here have the Reaktor 2.3 Library/Ensembles/Instruments/Samples?
There are "some" included in SIT files
My SampleCell Nubus card isn't recognizing so may as well make "Soft SampleCell Replicant" in Reaktor 2.3
also looking for any Reactor 2.3 manuals/guides
no clue if the links are acceptable in this post or needs being moved
attempted uploading as attachments.............
was taking forever so just used my FTP
« Last Edit: June 02, 2018, 04:22:52 PM by WhiteWarlock »

Offline Protools5LEGuy

  • Global Moderator
  • Platinum Member (500+ Posts)
  • *****
  • Posts: 2692
  • Liked:
  • Likes Given: 1239
Re: reaktor 2
« Reply #2 on: June 02, 2018, 09:32:58 PM »
Looking for MacOS 9.2.4

Offline WhiteWarlock

  • Enthusiast Member (25+ Posts)
  • ***
  • Posts: 92
  • SynthWizards/N01ZE
    • SynthWizards
  • Liked:
  • Likes Given: 0
Re: reaktor 2
« Reply #3 on: June 02, 2018, 10:08:35 PM »
mirrored this post on Mac Repository
https://www.macintoshrepository.org/15098-reaktor-v2-3
also found old archive cd with 150+ OS7-9 various Special[K] VST/RTAS SIT compressed audio plugins
will start sorting through them all when have some "mythical" extra time
not sure what is already archived here
will start poking around for see what ones are missing on forum
can work around the old list thread



Offline WhiteWarlock

  • Enthusiast Member (25+ Posts)
  • ***
  • Posts: 92
  • SynthWizards/N01ZE
    • SynthWizards
  • Liked:
  • Likes Given: 0
Re: reaktor 2
« Reply #4 on: June 03, 2018, 12:19:54 PM »
Upon conducting some experiments today
The Reactor 2.0 [K] crashes on Save Ensemble...
saying it can't find the "Enigma" file
Does anyone have any clue regarding this Enigma file
is it part of CD copy protection scheme?
also another glitch is some extension preventing seeing/loading soundfiles
Suspect Stuffit Deluxe 6.5 & Carbonlib
ran it on another OS that didn't have those installed & it recognized sound files instantly for loading
Reaktor 2.3 used the Enigma file for copy protection
The enigma file's on the install CD
Reaktor's copy-protection scheme loads a 100 MB file named Enigma onto your computer's hard disk; it acts as the "key" for program operation. I'm glad that every software maker doesn't use this sort of copy protection; if they did, keys would occupy most of my drive space. On the positive side, at least Native Instruments didn't use a hardware dongle or require a CD-ROM to be loaded at all times.
« Last Edit: June 03, 2018, 12:48:39 PM by WhiteWarlock »

Offline MacTron

  • Global Moderator
  • Platinum Member (500+ Posts)
  • *****
  • Posts: 2111
  • keep it simple
  • Liked:
  • Likes Given: 12
Re: reaktor 2
« Reply #5 on: June 03, 2018, 12:46:01 PM »
Please don't PM about things that are not private.

Offline WhiteWarlock

  • Enthusiast Member (25+ Posts)
  • ***
  • Posts: 92
  • SynthWizards/N01ZE
    • SynthWizards
  • Liked:
  • Likes Given: 0
Re: reaktor 2
« Reply #6 on: June 03, 2018, 01:02:07 PM »
Thanks for image link
attempting getting Reaktor v2.3 Working on OS8 with Digidesign442
no clue what's causing conflict with extensions for seeing sound files
may have better luck with Reactor v3
installed v3 on OS9 2001 Summer Imac G3 with usb edirol Ua3fx
reading through Sasso guide
http://www.swiftkick.com/ewExternalFiles/Reaktor3.pdf
http://www.n01ze.com/synthwizards/ARKIVE/Reaktor307.sit
« Last Edit: June 03, 2018, 02:45:35 PM by WhiteWarlock »

Offline WhiteWarlock

  • Enthusiast Member (25+ Posts)
  • ***
  • Posts: 92
  • SynthWizards/N01ZE
    • SynthWizards
  • Liked:
  • Likes Given: 0
Re: reaktor 2
« Reply #7 on: June 03, 2018, 01:18:45 PM »
Reaktor v2 offered relatively benign anti-piracy protection in the form of an included 100MB Enigma file, and so the introduction of a USB dongle with version 3 bothered some users although personally, I've never had reliability problems with this form of copy protection. You could also install as many copies of Reaktor as you needed to cope with desktop and laptop use, transferring your dongle from one to another as required.

However, in Reaktor v4, the dongle has been abandoned in favour of a CD-ROM with two small holes drilled in it, a unique serial number, a unique System ID that's generated during the install based on hardware components in your computer, and a unique software Authorisation Key that you obtain from NI to permanently unlock the software after its 30-day demo period expires. You can do this while on line if your music computer has Internet access, from another computer using a generated HTML page, or by post or fax.

This type of protection is becoming far more common nowadays, but may require re-authorisation after installing a new motherboard or operating system, and you won't be able to install multiple instances of Reaktor v4 any more, although NI will provide up to two authorisations if they are not being used at the same time, to cope with desktop and mobile use. Mac users can also get two authorisations for OS 9 and two for OS X, to cope with the changeover from one OS to the other. If you ever subsequently upgrade OS, or buy a new computer, you'll need to apply to NI at register@native-instruments.com for third or additional authorisations.

Offline Invalid

  • Member
  • Posts: 1
  • New Member
  • Liked:
  • Likes Given: 0
Re: reaktor 2
« Reply #8 on: May 03, 2021, 02:45:27 AM »
Hey, I also just installed reaktor.  Unfortunately my Instrument and Macro folders are empty.  Dis this happen to you too?  Does someone have the factory files to look at?

 


SimplePortal 2.3.6 © 2008-2014, SimplePortal