need pro tools 6.0 tdm upgrade software disk, mac

[mweed4]

Hi, new to forums,
I'm looking for just the software, if you have the software and a key i will buy both. I have a key for 5.0-5.13(for mac and PC) as well as a disk,and I have the 6.4.1 for PC as well,with the code which I believe works for either mac or PC...however I desperately need the 6.0 upgrade, as 6.4.1. tdm mac will not install without it. Avid was no help even with my key as I'm not the original owner. Any ideas are welcome as well.
will pay just to have someone burn all the tdm upgrade disks and send them to me, I will use my 6.0 code if they don't have one, or purchase both software and key
Much thanks
Mike

[Protools5LEGuy]

Let's do the basic...

Why you need 6.4.1 when you can run 5.1.3?

Did you tried a 5.1.3 install?

Did you tried half of these http://macos9lives.com/smforum/index.php?board=104.0?

All machines that can run 6.4.1 should run OS9 too. Only on some ALU powerbooks you have to.

[Protools5LEGuy]

Some serials...
PT 5.x TDM : DIGI0510 ac2200c8 913c43ae
PT 6.0 TDM : DIGI0600 6E350059 ADAA6768
PT 6.4 TDM : DIGI0610 4d3600fc 7764a6ed
PT 6.4 TDM : DIGI0600 213c00f4 51ffbf20
PT 6.4 TDM : DIGI0640 363800ed 1baf802b

[mweed4]

  greatly appreciate the serials, but for some reason, my os9 isn't working, (constantly getting an error 48 message) with pt and the only other choice is my OS X 10.4.11, which will run the pro tools mix w/ 4 888/24s, 2 farm cards and a core card system i have......also , i have to see if I can strip the disk , and re install everything, and haven't been able to find my recovery disks. I was fine , btw , with the 5.1.3 , just it got corrupted or some prob, and can't for the life of me at this point , get it to re install even in target disk mode, unmounted the disk re mounted, tried another hard drive , have been down in the studio now for hours attempting every trick i know.....

[Protools5LEGuy]

Did you followed all the guides for TDM? You have a dual CPU?

Did you tried an OS9 install with the CDs from here?

Did you have the multiprocessor extension enabled?

[mweed4]

am downloading the ones from here as we speak, did have the extension enabled, and according to the literature I read, my g4 (dual 500mhz) 1 gig ram , should have (and had at one time) no prob running it (in OS 9), something got messed up in my OS X or 9 folder , so when i tried it on classic in OS X, there was no way, i just figured if i couldn't make 5.1 work , i could make 6.x work in OS X tiger.now Im sitting with a lot of hardware and no way to use it, 32 tracks of 24/48 pro tools mix gear, and a g4 thats no help....and , it says that when using nine, the dual procs don't really matter as its only using one....and thanks for the plug in links as well, once back up , I'm sure i will use some, some i had....any not there that i have I will post

[supernova777]

you are in the right place if u want help to get everything running with TDM 5.1.3 on mac o 9.22..

if you are having problems... the best thing to do would be to get a new drive formatted + partitioned for mac os 9.22 + start from scratch with one of our mac os 9 installs... or u can use the original restore discs shipped with the mdd... theres a set of 4 discs (for the august 2002 mdd's) or 1 dvd (for the 2003 mdd)

im not sure where the mdd restore discs are on macintoshgarden but
i have the mdd restore discs on my mediafire account
u can download them here (4 discs)
https://www.mediafire.com/folder/tyyfd81hmd94g/mdd_restore

i was also given a dvd from the guy from oakbog.. (the same one that jakl posted about in the fw800 downgrade thread http://macos9lives.com/smforum/index.php?topic=762.msg2676#msg2676 u can see it says DVD version 1.0 on the disc) im not sure where i have this disc atm tho.. i might have to upload it. but this is a nonissue for u i think because u said u have a dual processor.. not sure if u meant the QS dual 1ghz or one of the dual MDD's but im guessing u meant the dual MDDs (2002)

[mrhappy]

I had good luck with the 'drag install' of 9.2.2

http://macos9lives.com/smforum/index.php?topic=1859.0

And the PT 5.1.3cs11 here

http://macos9lives.com/smforum/index.php?topic=855.0
 

[mweed4]

yup is hard drive fail, i got a few i can dig up, 80 gig should work ok, i think i have 2, I had it in td mode was obviously fragged lol at least i determined the problem, and thanks to all who posted/helped, had to use btw, my other mac pro w/10.6 on it to determine this, as the one i was using with 10.10.2 was of no assistance whatsoever