Print

[SpiritFlight]

The iching CD I have is different. It is an interactive program where one tosses the Chinese coins while sitting at the edge of a divining pool inside a cave with coy swimming around. Interpretation of the coins with beautiful graphics are read to the user by a female voice. It's very cool. I used to have my old g3 iMac setup just for the iching. Now it's in storage because I don't have room for it. I'm going to go see if I can find it. I hope it's inside the iMac optical drive. I will also get myself set up with media fire and see how that system works. I hope upload...
• The carbon app Deck 3.5. It runs in both OS 9 and OS X. No serial number required.
• Waves 5 (OS X) 2 files, includes Interlok reset app and Pace Interlok extensions installer. No serial number required.
• Waves 4.0 Interlock Extensions installer (OS 9/OS X)

Peace,
Steffan

[SpiritFlight]

Here is the apple script code for toggling between visible and invisible files. Tested in Panther (Mac OS 10.3).

Copy entire code below and paste it into a new apple script window and then "Save As" Application" It works great.

display dialog "Set the visibility of hidden files..." buttons {"Cancel", "Visible", "Invisible"} default button 1
copy the result as list to {buttonpressed}
if the buttonpressed is "Invisible" then
      try
      tell application "Finder" to quit
      do shell script "defaults write com.apple.finder AppleShowAllFiles OFF"
      delay 1
      tell application "Finder" to activate
   end try
else if the buttonpressed is "Visible" then
   try
      tell application "Finder" to quit
      do shell script "defaults write com.apple.finder AppleShowAllFiles ON"
      delay 1
      tell application "Finder" to activate
   end try
end if

[Miro Le Ravi]

hello is this i lock  works for the waveshell 2.8  and the vst wrapper ? 
i m searching to make functionning them again 
 idon't find back  installer and authorization codes
thanks for answering

[MacTron]

This procedure is intended for Waves 4.x. You have to figure out by yourself If this work or not with Waves 2.8.
Anyway, I recommend you to use the 3.2 version that it's available here:

http://macos9lives.com/smforum/index.php/topic,1159.msg4435.html#msg4435

and don't need the resetting procedure

I had tried the vst wrapper several years ago and worked fine for me. I don't know what kind of issue you have. But anyway, if you need VST stuff please use Cubase, and forget about this "solutions"  (the waveshell and the wrapper ) because it adds extra complexity to the working enviroment and it lead to stability problems in to the near future.

[Miro Le Ravi]

thanks but do you thinks  it s gonna work on the dp2.72 the  wave 3.2?
thanks because i have used till today the 2.8? and there were a wave key emulator  in the board? 
how should i do  with this one ? 
anyway thanks i will try

[Miro Le Ravi]

well  i understand your point
 but i ve used  the vst wrapper  for years  and the waveshell 2.8 and it was perfect
are you sure the 3.2 works with the dp2.72
thanks
i will try

[Miro Le Ravi]

very thanks mactron

could you just tell  me if i have to install them with a key code and a wave key emulator? 
or just put the files where they have to run ?

[IIO]

waveshell 3.x works fine with vstwrapper

[luciopaolucci75]

Resetting the iLok time demo, the easy way:



1- Install iLok 5.05 (attached)
2- Drag and drop your startup HD to the "Make all visible" app. (attached)
3- Run the scrip "iLok 5.05 Time ResetScript" (attached)
4- Reboot your computer.

Perform steps 2 to 4 each time the demo expires.

This was successfully tested with Waves 4, I guest it should work with other iLok time demos, ( SonyOxford stuff and Antares Filter ... ) as far as they work with iLok engine 5.0.5 

Hi Guys! Im new on this community, I came here specifically because this post. Im interested in trying this method, but my problem is that I cant find the "attached files". Am I too dumb or these files aren't attached?

Thanks in advance!

[GaryN]

They're right there in the first post:

* iLokTimeResetScript.sit

[Protools5LEGuy]

Im interested in trying this method, but my problem is that I cant find the "attached files". Am I too dumb or these files aren't attached?

Thanks in advance!

It is normal behaviour. Until you write a post, you cant see attached files,

[mrhappy]

It is normal behaviour. Until you write a post, you cant see attached files,

So THAT'S how we suck them in!! Haha!

[elbrotus]

its work in 2020? for Soundtoys 5

[theviirus]

i cant figure out why, but the "make all visible" part of the process doesnt show up as an application nor can I drag/drop my HD onto it.

has anyone run into this?
any thoughts anyone?

solved, somehow;  I renamed “make all visible” with an hqx file extension, a stuffit window popped up, then I found myself able to drag my HD to the “make all visible” file.  Now my HD is being scanned and it’s showing all those “_(filename)” files that we can’t ever get rid of.  :-)

maybe someone will be able to explain how what I did works

[sasha33belov]

will try this today, and inform you if it still working

[ivanshpak]

Hello everyone! I want to try this method, and I want to see the files in the attachment

[Protools5LEGuy]

Hello everyone! I want to try this method, and I want to see the files in the attachment

Better if you drop some lines here: http://macos9lives.com/smforum/index.php/topic,1991.0.html

[hoovers@dawn]

Resetting the iLok time demo, the easy way:



1- Install iLok 5.05 (attached)
2- Drag and drop your startup HD to the "Make all visible" app. (attached)
3- Run the scrip "iLok 5.05 Time ResetScript" (attached)
4- Reboot your computer.

Perform steps 2 to 4 each time the demo expires.

This was successfully tested with Waves 4, I guest it should work with other iLok time demos, ( SonyOxford stuff and Antares Filter ... ) as far as they work with iLok engine 5.0.5 

thank you mactron this worked a treat for the antares filter reset. Currently downloading waves 4 to try, seen as though im going to be resetting the ilok...

cheers again 

[solidgameent]

I just want to be able to see the attachment links

[mrhappy]

check out the post from Protools5LEGuy above.