Pages: 1 2 [3]   Go Down

Author Topic: flashing + mods for various cards for os9 (9250, 9000, 7000)  (Read 42727 times)

Jacques

  • Enthusiast Member
  • ***
  • Offline Offline
  • Posts: 63
  • Mac and SGI enthusiast
Re: flashing + mods for various cards for os9 (9250, 9000, 7000)
« Reply #40 on: August 20, 2023, 12:00:16 AM »

I’m not sure. I am ready to try but dono what file to use?

Ok so as you have a G3 you shouldn’t have to cut pins 3+11.

This is the page you should be looking at. You will also find loads of other links to the ROM files in the left hand ATI links section.

http://themacelite.wikidot.com/9250-trick

I flashed using the vnc method and it worked well doing it remotely.


Logged

Jacques

  • Enthusiast Member
  • ***
  • Offline Offline
  • Posts: 63
  • Mac and SGI enthusiast
Re: flashing + mods for various cards for os9 (9250, 9000, 7000)
« Reply #41 on: August 20, 2023, 12:12:43 AM »

Hold on doesn’t the G3 B\W only have PCI slots? The first card you linked is AGP.
Logged

Sphere478

  • Newcomer
  • *
  • Offline Offline
  • Posts: 7
  • New Member
Re: flashing + mods for various cards for os9 (9250, 9000, 7000)
« Reply #42 on: August 20, 2023, 03:24:55 PM »

Hold on doesn’t the G3 B\W only have PCI slots? The first card you linked is AGP.
mine is pci. 66mhz 32-bit and three or four 64-bit 33mhz slots
Logged

Hi-FiMan

  • Newcomer
  • *
  • Offline Offline
  • Posts: 1
  • New Member
Re: flashing + mods for various cards for os9 (9250, 9000, 7000)
« Reply #43 on: May 24, 2024, 03:52:09 PM »

I flashed the full 128k ROM version, not reduced.

As reported a few posts above, high density RAM is not recognised and you’ll only see a portion of the vRAM.

All the software and instructions are in this post.

http://macos9lives.com/smforum/index.php/topic,6499.msg48620.html#msg48620

Maybe this would be a better card to try? What do you think? I also have this one.





I've got the same card. Has anyone figured out the resistors for this one?
Logged
Pages: 1 2 [3]   Go Up
 

Recent Topics