Please login or register.

Login with username, password and session length
Advanced search  

News:

Pages: [1]   Go Down

Author Topic: Pro Tools 5.1.1 for G3 w/ AM3: Serial?  (Read 708 times)

Archilog

  • 2 MB
  • *
  • Posts: 2
  • new to the forums
Pro Tools 5.1.1 for G3 w/ AM3: Serial?
« on: Yesterday at 12:51:28 PM »

Hello everybody,

I bought (well, I won with my summer job) an Audiomedia III card to use under Windows, it was a nice bundle at that time (1997?), and I quite recently acquired a cheap G3 Mac to put it in.

I'm not aiming to professional sound design (it was my first job but I'm now almost retired from Education as teacher), I just want to digitalize some old tapes and my Audiomedia III seems to be ok for that - I've successfully tested it recently under Windows and the Digitest application I discovered among many installation files didn't see any issue about the hardware installed into the G3.

Thanks to your forum I managed to install Pro Tools 5.1.1 (thank you Knezzen!) but now I'm facing the serial number validation problem. It's a long time I don't have the manuals and boxes of the bundle anymore.

I just navigate during a few days a lot of ressources but didn't find anything. I am honest and just want to use my AM3 card again on my old blue tower. Would it be possible?

Many thanks in advance.
Logged

Protools5LEGuy

  • Staff Member
  • 2048 MB
  • ******
  • Posts: 2841
Re: Pro Tools 5.1.1 for G3 w/ AM3: Serial?
« Reply #1 on: Today at 09:10:33 AM »

I have been using that combo for years (G3B&W+AMIII)

I would use an modern Analog to Digital converter before getting to the AMIII. In this way you can get the full 24 bits path. Using the analog onboard you will get only 18 bits, enought for 2000' but not for today.

Search for iSerial/Serial Box for the password. It is not the same for PT 5 LE than for PT5 (TDM/MIX).
Logged
Looking for MacOS 9.2.4

Protools5LEGuy

  • Staff Member
  • 2048 MB
  • ******
  • Posts: 2841
Re: Pro Tools 5.1.1 for G3 w/ AM3: Serial?
« Reply #2 on: Today at 09:14:14 AM »

That is another reason to have the "old" download pages still intact and leading to the actual Hotline. We had the serial on every Protools download before the Hotline update. The retention inside MacOS9Lives! forum is smaller than before. Now you have to go to the "outsider" garden/repository to get to the serial when we had that info here before Knez/110 earthquake.
Logged
Looking for MacOS 9.2.4

Protools5LEGuy

  • Staff Member
  • 2048 MB
  • ******
  • Posts: 2841
Re: Pro Tools 5.1.1 for G3 w/ AM3: Serial?
« Reply #3 on: Today at 12:02:33 PM »

Check them!
Logged
Looking for MacOS 9.2.4

Protools5LEGuy

  • Staff Member
  • 2048 MB
  • ******
  • Posts: 2841
Re: Pro Tools 5.1.1 for G3 w/ AM3: Serial?
« Reply #4 on: Today at 12:07:25 PM »

DIGI0510 7e3e00cb dfee5c8f

DIGI0510 78350061 75614976

DIGI0510 a0210039 1b6bfbe9

DIGI 0510 ac3100c 473ccf70

DIGI0510 ac2200c8 913c43ae
Logged
Looking for MacOS 9.2.4
Pages: [1]   Go Up

Recent Topics