Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[Architecture]

I am looking for an installer for Pro Tools HD6 for pairing with Logic 6/7 on my G4/G5s.

Pro Tools 6.4.1 does not work with HD sadly.

It was the last generation Pro Tools to support HTDM plugins (which Logic worked well with in this pairing). Ideally V6.7 but will take any version that runs on OSX 10.3.

[Knezzen]

Hm... I'll have a look in the archives. I thought you where after 6.4.1. Let's see...

[Knezzen]

Sorry, I only seem to have Pro Tools TDM 6.4.1 laying around

[Architecture]

In my search, I have found a web installer for Pro Tools 6.2.3 TDM. I have uploaded it to Macintosh garden https://macintoshgarden.org/apps/pro-tools-tdm-623

Does not have the plugin updaters, so I will probably source those from the PT 6.4.1 disk and post those as a seperate download. Still looking for PT 6.4, 6.7 and 6.9. If I find those I will upload them.

This serial worked in my installation.
DIGI0600 6E350059 ADAA6768

Very important note: This will only work on Mac OSX 10.3.2-10.3.4. Anything newer will automatically crash when attempting to playback sound.

Still looking for newer versions to post, since this version is painfully limited by a difference of .2 Mac OS updates

[Architecture]

I did manage to find a working Pro Tools 6.7 Install disk, not sure where to upload it first so ill probably save that one for the Hotline server. (has loads of plugin updates including bomb factory plugs).

This is another file im trying to find a way to obtain but can't get past "permissions". Moving up to 6.9 would allow me to move past 10.3.9 and into Tiger where software support seems to be a bit better.
https://media.digidesign.com/support/secured/pt691_26138.bin?token=1732473253_d51a78a5c8944fa7f1858acd62c334d8

found on this page
https://secure.digidesign.com/services/avid/kb/downloads.cfm?digiArticleId=5170

[Knezzen]

Please do upload it to Hotline or the garden so we can archive it (and i can use it once my 1.8Ghz dual G5 TDM rig is being maxed out )

[Architecture]

The full installer has offically been uploaded to the garden

https://macintoshgarden.org/apps/pro-tools-tdm-623

DL#1: Pro Tools 6.2.3 (Web installer).
Requires Mac OSX 10.3.2 - 10.3.4, HD Core card and interface, and a valid Pro Tools 6.0 license serial. Web installer, no plugin updates with this installer.

Pro Tools 6.2.3 TDM software for HD systems is officially supported on Mac OS X 10.3.2 (Panther) with the following systems on Power Mac G5 and supported Power Mac G4 models*:

Pro Tools|HD
Pro Tools|HD Accel

DL#2 Pro Tools 6.7 (full disc installer)
Pro Tools 6.7 TDM software for HD systems is officially supported on Mac OS X 10.3.2, 10.3.4, 10.3.5, 10.3.7, and 10.3.8 (Panther) with the following systems on qualified* Power Mac G5, Power Mac G4, and PowerBook G4 models:

Pro Tools|HD Accel
Pro Tools|HD

Compatibility changes with Pro Tools 6:
Version 6.0 to 6.1 do not support HD Accel cards, these will work with HD Process cards. OSX Jaguar era.

Version 6.2 introduced HD Accel card support. V6.4/6.7/6.9 were offered as an paid upgrade from V6.2.3 and below.

Wanted: Any update files (including CS updates) for Pro Tools 6.x. V6.9.2 enables use of Pro Tools 6 on OSX Tiger 10.4-10.4.2 (Haven't tested to see if it works on 10.4.11).

Compatibility
Architecture: PPC
Pro Tools 6.2.3 Minimum OSX: 10.3.2. Does not run past 10.3.4 (will crash on playback)
Pro Tools 6.7 Minimum OSX: 10.3.2. Runs on 10.3.9 with no issues.

PT 6.7 Serial: DIGI0670 633800bf aa7b21ea

[vectrex]

I did manage to find a working Pro Tools 6.7 Install disk, not sure where to upload it first so ill probably save that one for the Hotline server. (has loads of plugin updates including bomb factory plugs).

This is another file im trying to find a way to obtain but can't get past "permissions". Moving up to 6.9 would allow me to move past 10.3.9 and into Tiger where software support seems to be a bit better.
https://media.digidesign.com/support/secured/pt691_26138.bin?token=1732473253_d51a78a5c8944fa7f1858acd62c334d8

found on this page
https://secure.digidesign.com/services/avid/kb/downloads.cfm?digiArticleId=5170

not seeing it when searching via cdx, maybe other files of interest though?

https://web.archive.org/cdx/search/cdx?url=http://akmedia.digidesign.com/support/*&output=txt&from=2000&to=2020

[vectrex]

Architecture,

Just posting these wayback links assuming you have already combed these areas. Might lead you in other directions/combinations of urls that could work.

nothing older than v10 on the current avid site: https://web.archive.org/cdx/search/cdx?url=https://cdn.avid.com/ProTools/*&output=txt&from=2010&to=2024


https://web.archive.org/cdx/search/cdx?url=http://akdownload.digidesign.com/support/69/*&output=txt&from=2000&to=2024

^ 6.9 updates as bin and dmg files, though they require a current version of 6.9 according to the dmg ProToolsTDM 6.9.3cs4 ReadMe.pdf

if you remove the ak you can download:
http://akdownload.digidesign.com/support/69/pt693cs4.dmg
http://akdownload.digidesign.com/support/69/pt693r2.dmg

[smilesdavis]

Pro Tools 5.x & 6.x CS Updates

For previous CS updates for Pro Tools 6 and Pro Tools 5 systems, please see the following:
Pro Tools CS Updates Archive
https://web.archive.org/web/20060624052212/http://archive.digidesign.com/download/cs/ (earliest version, use the captures overview on the top to browse later versions)

Direct Access to Digidesign support files:
https://web.archive.org/web/*/http://akdownload.digidesign.com:80/support/*

Direct Access to Read Mes:
https://web.archive.org/web/*/http://archive.digidesign.com/support/readme/*

[Architecture]

nice find!

https://web.archive.org/web/*/http://akdownload.digidesign.com:80/support/*

Very large find. Finding a lot of plugin installers I was missing for 6.4.1. I’m wondering if Digidesign put the full installers on another server requiring login credentials? Been asking people who would have had PT6 back in the day if they can login to their account and see if they have the option to download as a registered user.

[ssp3]

Architecture & smilesdavis, are you downloading all those from the archive?
All I have in my vaults are:
Pro Tools TDM 6.4.1 Installer.toast
pt64cs6.bin
pt64cs9.bin
pt641cs4.bin
pt641cs3.bin
Dev Partner 6.9 Plug-In Updater.bin
pt623update.dmg
ptle623update.dmg
ptle623full.dmg

Don't ask me why I have these, I stopped using PT around 5.x., IIRC.

[Architecture]

Architecture & smilesdavis, are you downloading all those from the archive?
All I have in my vaults are:
Pro Tools TDM 6.4.1 Installer.toast
pt64cs6.bin
pt64cs9.bin
pt641cs4.bin
pt641cs3.bin
Dev Partner 6.9 Plug-In Updater.bin
pt623update.dmg
ptle623update.dmg
ptle623full.dmg

Don't ask me why I have these, I stopped using PT around 5.x., IIRC.

I am working to upload the 6.4.1 iso to the garden. 6.2.3 is currently on the garden for TDM.

Issue with the cs updates is you need the original installer for the version you wish to patch with the CS update. Organizing the garden I would compile CS updates per release (ie 6.9 CS updates, 6.9.1 CS updates).

[Carlito]

Architecture & smilesdavis, are you downloading all those from the archive?
All I have in my vaults are:
Pro Tools TDM 6.4.1 Installer.toast
pt64cs6.bin
pt64cs9.bin
pt641cs4.bin
pt641cs3.bin
Dev Partner 6.9 Plug-In Updater.bin
pt623update.dmg
ptle623update.dmg
ptle623full.dmg

Don't ask me why I have these, I stopped using PT around 5.x., IIRC.

I'm very interested in a Controller for Digi 002 Rack that might be present on the Protools LE 6.2.3 full installer ptle623full.dmg. Would you upload that to the garden?

[ssp3]

No. Use HL.

[Carlito]

No. Use HL.

True, Gopher rules! Think it was 30 years since I used it last time. Would you or someone put it there? Please please

[ssp3]

It's already there. I up'ed it a few hours ago.

[Architecture]

Architecture & smilesdavis, are you downloading all those from the archive?
All I have in my vaults are:
Pro Tools TDM 6.4.1 Installer.toast
pt64cs6.bin
pt64cs9.bin
pt641cs4.bin
pt641cs3.bin
Dev Partner 6.9 Plug-In Updater.bin
pt623update.dmg
ptle623update.dmg
ptle623full.dmg

Don't ask me why I have these, I stopped using PT around 5.x., IIRC.

I'm very interested in a Controller for Digi 002 Rack that might be present on the Protools LE 6.2.3 full installer ptle623full.dmg. Would you upload that to the garden?

Saw it on the HL server as well.

[Knezzen]

Everything on Hotline is on Gopher as well. It's the same file area on the server, only accessed through different protocols.

Check out gopher://gopher.macos9lives.com in your favorite Gopher client

[Carlito]

It's already there. I up'ed it a few hours ago.

Thanks! Didn't look in the UL directory.