Please login or register.

Login with username, password and session length
Advanced search  

News:

Pages: 1 [2]   Go Down

Author Topic: Second Wave Xpanse PN200 and Xpanse N200  (Read 10958 times)

balrog

  • 2 MB
  • *
  • Posts: 2
  • New Member
Re: Second Wave Xpanse PN200 and Xpanse N200
« Reply #20 on: January 16, 2023, 09:23:50 AM »

Yeah... I saw that, but...
1) He has 3 cards and only showing one of them and...
2) Maybe they are patched up to 3.5...

3.5 was a custom mailorder upgrade of the rom + installation instructions. if you just put a 3.5 on your card you might bust your system.

I suspect that some later systems were sold with v3.5, However, unless you can get a photo showing a v3.5 label, I wouldn't take the risk. I tried this a while back with similar sellers on AliExpress and they would claim they have v3.5 but would never send me a photo.

It's unlikely you'll damage your system; most likely it just won't work without appropriate setup.
Logged
Pages: 1 [2]   Go Up

Recent Topics

[Off Topic] What did you do with your PowerPC Mac today? by smilesdavis Yesterday at 11:10:58 AM
[Off Topic] Music Faves by jojo2k Yesterday at 07:57:27 AM
[Hardware] Powerbook for OS9 and SVP by BimmyLee August 29, 2025, 09:53:37 PM
[Hardware] MDD Freeze / J20 RAM Slot by aBc August 29, 2025, 07:41:14 PM
[Hardware] G4 MDD only boots using ADC monitor power button by smilesdavis August 29, 2025, 09:31:06 AM
[Hardware] Rev A/B iMac Freezes on Startup by keithiepoo August 28, 2025, 04:42:38 AM
[Off Topic] Power Use by torvan August 27, 2025, 11:01:40 PM
[Mac OS 9, Hacks & Upgrades] help my b+w g3 450 is haunted! upgrading from 8.6 to 9.0 fine but 9.1 ruins it by DieHard August 27, 2025, 04:50:57 PM