Please login or register.

Login with username, password and session length
Advanced search  
Pages: [1]   Go Down

Author Topic: iBook G3 Dual USB 2001 500MHz - No Sound  (Read 3298 times)

viksn0w

  • 16 MB
  • ***
  • Posts: 22
  • Per aspera ad astra.
    • My page
iBook G3 Dual USB 2001 500MHz - No Sound
« on: October 17, 2026, 04:54:23 AM »

Hi, as of the title I've bought an iBook G3 Dual USB 2001 500MHz, when bought I used for a couple of days and sound worked, then it stopped entirely from the speakers and only via the AV Jack. I've ripped it open and occasionally when flexing the board it came back to life, I want a proper fix. I've found a P72/P73 logic board scheme where I could trace the problem and probably is the Q82 transistor that manages the mute function of the amplifier ( U25 LM4863M 16 pins) where it is on PIN 16 HP-IN.

If I short HP-IN and GND, audio from the speakers comes back. When HP-IN is 5v, it tells the amp to switch from speaker to headphone mode. From the schematics I've checked and the PIN 16 is connected to a Q82 - 2N7002 transistor but I cannot point where the Q82 is. I've found the R399 which is also connected to the Q82, but I can't see it.

If someone of you knows where I can find it or can send me a photo of it (it would be preferable), thanks!

Link of the P72/P73 scheme: https://www.informaticanapoli.it/download/SCHEMIELETTRICI/APPLE/Apple-MLB-Block-Diagram-for-P72-051-6130-C.pdf
Link of the U25 LM4863M 16 pins:
https://www.ti.com/lit/ds/symlink/lm4863.pdf

Note:
I know that the P72/P73 is probably for the iBook G3 2002, but I've checked for other components and also the labels are matching, so it is pretty reliable for my 2001 model.
Logged
Mac Mini G4
iBook G3 DU & iBook G3 Clamshell
PowerMac G4 & PowerMac G5
iMac G3 1998 (gen 1)

viksn0w

  • 16 MB
  • ***
  • Posts: 22
  • Per aspera ad astra.
    • My page
Re: iBook G3 Dual USB 2001 500MHz - No Sound
« Reply #1 on: October 17, 2026, 05:54:25 AM »

Updated, found it on the other side along other resistors (near the AV port), everything seems fine I guess, so the problem is either the chipset with a cold solder point or is more downstream but couldn't figure it out yet
Logged
Mac Mini G4
iBook G3 DU & iBook G3 Clamshell
PowerMac G4 & PowerMac G5
iMac G3 1998 (gen 1)

robespierre

  • 128 MB
  • ****
  • Posts: 206
  • malfrat des logiciels
Re: iBook G3 Dual USB 2001 500MHz - No Sound
« Reply #2 on: October 20, 2026, 08:06:20 PM »

The output is meant to automatically switch to headphones when you plug in a cable to the headphone jack: this means that there are additional contacts inside the jack that detect when an object is inserted (they are called "normalled" contacts). The problem may not be caused by electronics, but simply poor/stuck connections of these contacts. One thing to try is to exercise the jack by plugging and unplugging a cable from it a number of times. You could also exercise it after spraying a contact cleaner such as CRC QD Contact Cleaner into it. Note that you should never do this with WD-40.
Logged

viksn0w

  • 16 MB
  • ***
  • Posts: 22
  • Per aspera ad astra.
    • My page
Re: iBook G3 Dual USB 2001 500MHz - No Sound
« Reply #3 on: October 29, 2026, 01:13:23 AM »

Tried with isopropyl alcohol but nothing, even inserting the jack back and forth into the port with isopropyl alcol did nothing. It would be cool to understand what pins do actually set the HP_IN high
Logged
Mac Mini G4
iBook G3 DU & iBook G3 Clamshell
PowerMac G4 & PowerMac G5
iMac G3 1998 (gen 1)

smilesdavis

  • 1024 MB
  • ******
  • Posts: 1338
  • ...
Re: iBook G3 Dual USB 2001 500MHz - No Sound
« Reply #4 on: October 30, 2026, 07:18:39 AM »

HP_IN is pulled high by R399 and should be pulled low by Q82, so check Q82’s gate via R1034 and reflow the joints around Q82, especially since flexing the board temporarily restores sound.
Logged
new in September: iSight (box), System 7 (box)

viksn0w

  • 16 MB
  • ***
  • Posts: 22
  • Per aspera ad astra.
    • My page
Re: iBook G3 Dual USB 2001 500MHz - No Sound
« Reply #5 on: November 04, 2026, 08:25:25 AM »

HP_IN is pulled high by R399 and should be pulled low by Q82, so check Q82’s gate via R1034 and reflow the joints around Q82

Thank you! I'll surely try this!
Logged
Mac Mini G4
iBook G3 DU & iBook G3 Clamshell
PowerMac G4 & PowerMac G5
iMac G3 1998 (gen 1)
Pages: [1]   Go Up

Recent Topics