Digital Audio Workstation & MIDI > Audio & MIDI Hardware

Lynx

(1/1)

smilesdavis:
LynxONE (2000 for Mac)

Two 24-bit/50kHz Balanced Analog I/O
24-bit/96 kHz Digital I/O
Two MIDI ports
Flexible Synchronization
Windows 95/98/ME/NT/2000 Drivers
Macintosh ASIO 2.0 Drivers
Multi-Card support

The LynxONE is available to customers in the United States direct from Lynx Studio Technology for $549 (. $549 in 2001 equals $967.84 in 2024.)  This price includes:
 LynxONE 24-bit Digital Audio/MIDI card.
Six-foot shielded XLR audio cable.
Two-foot shielded MIDI/Clock cable.
Manual and installation diskette.
3 day air express shipping.
30 day money back guarantee.

https://web.archive.org/web/20010629062546/http://www.lynxstudio.com/lynxonebrochure.html

September 2000:  Lynx Studio Technology Releases Macintosh ASIO 2.0 Driver for LynxONE™
https://web.archive.org/web/20010822190235/http://lynxstudio.com/pr200009.html

LynxTWO (2001)
https://web.archive.org/web/20010603145427/http://www.lynxstudio.com/pr200101.html

Four 24-bit/192kHz Balanced Analog I/O ("A" Model)
24-bit/96kHz Digital I/O with Sample Rate Conversion
SMPTE time code read and generator
Composite video genlock
Multiple-board audio data routing and sync
Two LStream™ ports support 8 additional I/O channels each
Windows 98/ME/NT/2000 Drivers
Macintosh ASIO 2.0 Drivers

https://web.archive.org/web/20010408051558/http://www.lynxone.com/products.html

LynxONE™ / LynxTWO™ Comparison Chart
https://web.archive.org/web/20010419010925/http://www.lynxone.com/compare.html

Aurora LynxTWO/L22 Interface Kit
To further the interface versatility of the Aurora 8 and Aurora 16 AD/DA converters, Lynx Studio Technology offers the LynxTWO/Aurora Interface Kit. This easy-to-install accessory allows LynxTWO and Lynx L22 PCI audio card owners to add up to 16 analog and digital inputs and outputs.
https://www.lynxstudio.com/products/lt-lsextkit-lynxtwoaurora-interface-kit-2/

LS-AES
The Lynx LS-AES and LS-ADAT provide high-performance multi-channel AES/EBU and ADAT connectivity for any Windows or Macintosh based audio or video workstation at sample rates up to 192kHz. Both devices offer a straightforward interface to digital recording and broadcast consoles, multi-channel A/D and D/A converters, and digital tape and hard disk recorders.

The LS-AES provides four inputs and outputs for up to eight I/O channels that support professional AES/EBU and consumer S/PDIF digital I/O formats. Connections are transformer coupled with proquality sample rate conversion (SRC) available on all inputs. The LS-AES is also compatible with Dolby Digital and DTS encoded formats.

Running at a sample rates up to 96 kHz, the LS-AES provides eight I/O channels in single-wire mode and four channels in dual-wire mode. At 192 kHz, four channels of I/O are available in dual-wire mode and two channels in quad-wire mode. For additional channel capacity, two LS-AES cards can be used simultaneously with one LynxTWO or L22.

The LS-AES can handle both asynchronous and synchronous studio configurations. SRC can be enabled independently on each digital input to accommodate asynchronous signals from multiple digital devices Alternatively, all inputs can be run synchronously and any input can be selected as the system clock source. The card can also be synchronized to a word clock or composite video received by the host LynxTWO. The LS-ADAT is a full-function ADAT interface that provides two ADAT lightpipe inputs and outputs and an ADAT Sync In Port. Operating at a sample rate of 48 kHz, the LSADAT I/O channel capacity is 16. Higher sample rates are supported using S/MUX technology: eight channels at 96 kHz and four channels at 192kHz.

Both the LS-AES and LS-ADAT integrate seamlessly with the LynxTWO or L22. Channels from the expansion cards are connected directly to the LynxTWO/Lynx L22 digital mixer. This allows almost unlimited routing capabilities with expansion card I/O's, as well as the analog and digital I/O's of the host LynxTWO or Lynx L22.

Using the LynxTWO/L22 Mixer application, "stand-alone" functions can be configured that place no demand on the host computer. In a LynxTWO system these functions include but are not limited to:

four-channel, 192 kHz analog-to-AES or analog-to-ADAT converter
four-channel, 192 kHz AES-to-analog or ADAT-to-analog converter
eight-channel, 96 kHz analog-to-AES or analog-to-ADAT converter
eight-channel, 96 kHz AES-to-analog or ADAT-to-analog converter
eight-channel AES digital patch-bay
16-channel ADAT digital patch bay
AES to ADAT or ADAT to AES format converter (with optional LS-ADAT interface)
Composite video or word clock to AES or ADAT synchronizer
Features:
Internal card connects via ribbon cable to LynxTWO and Lynx L22 PCI cards
Four inputs and outputs (stereo) that support AES/EBU and S/PDIF digital I/O formats
Transformer-coupled balanced XLR connections
Eight I/O channels at sample rates up to 96 kHz and four I/O channels at 192 kHz
Support for single-wire, dual-wire, and quad-wire connections
Pro-quality sample rate conversion at ratios up to 3:1, independently available on each I/O
Compatible with Dolby Digital and DTS encoded formats
Two LS-AES cards can be used simultaneously with one LynxTWO or L22
Supports asynchronous and synchronous studio configuration
Any input can be selected as the system clock source
Can be synchronized to word clock or composite video from host LynxTWO or L22
Installs in an empty bracket position, no PCI slot required
Includes: LS-AES LStream Ribbon Cable and 6' AES/EBU Breakout Cable
For S/PDIF coaxial connections, the optional Lynx XLR to RCA S/PDIF adapters CBL-XFDR18 and CBL-XMDR18 are required.
https://vintageking.com/lynx-studio-technology-ls-aes-for-lynxtwo-and-lynx-l22


AES16
https://lynxstudio.net/product_detail.asp?i=13

The most professional setup for Mac OS 9 especially in
Combination with Aurora 16 converters

Allows for ASIO and Pro Tools HD switching

Navigation

[0] Message Index