Digital Audio Workstation & MIDI > Audio & MIDI Hardware
Re: Wanted: OS9 Version "Delta OMS Driver" for the M Audio Delta 1010
(1/1)
blaylok:
If someone has the macintosh OS9 "Delta OMS Driver" for the Delta 1010 it would be greatly appreciated please
Having trouble trying to track it down
GaryN:
Try this
blaylok:
Thank you GaryN. :)
smilesdavis:
https://web.archive.org/web/20000510030342/http://www.m-audio.com:80/html/products/delt1010.htm
https://www.soundonsound.com/reviews/m-audio-delta1010?amp
https://web.archive.org/web/20000510075712/http://www.m-audio.com:80/html/products/delt101ai.htm
Macintosh Drivers
M Audio Mac OS Drivers with Delta Panel v1.2.5bl
These are new (12-22-00) Drivers for each individual Delta product for Macintosh computers. They include many control panel fixes, and a fix for noise at 96kHz.
Please read the included readme file for your set of drivers.
*You must have OMS 2.3.7 (oms 2.3.7.sea.hqx, 3.5M) installed in your Mac to run this driver
Opcode recommends the use of "USB floppy enabler" with OMS (PACE Anti-Piracy’s USB Floppy Enabler Version 2.1 - A Floppy Emulator for Power Macintosh G3 and G4 Computers/ https://web.archive.org/web/20010105155700/http://paceap.com/default.html)
Delta 1010, version 1.0.0 with MIDI Drivers
installation instructions
https://web.archive.org/web/20011111175143/http://www.midiman.net:80/support/how_to/deltamac/deltamac.htm
Delta 1010 Macintosh Installation
1. Open the System folder on your Macintosh hard drive. In the System folder,
locate the Extensions folder.
2. On you Drivers CD disk, open the Mac Delta Drivers folder. Place the
extension file "Delta 1010 Driver" in your Extensions folder by clicking on it
and dragging it to the Extensions folder.
3. If you are using a music program that uses ASIO drivers, it will also have an
ASIO folder within the application’s folder. In your Mac Delta Drivers folder
you will find three Delta 1010 ASIO drivers. For Cubase versions 4.x, use the
"ASIO2 Delta1010" driver. For Metro, or earlier versions of Cubase, use the
"ASIO Delta1010v3" driver. For any music program that is not ASIO2 capable,
use the “ASIO Delta 1010” driver instead (check your program’s
documentation). Place the file "ASIO Delta" in your program's ASIO folder by
clicking on it and dragging it to the ASIO folder.
4. Drag the "DeltaPanel PPC" file onto your Macintosh hard drive. You can run
the Delta Control Panel from any place that's convenient, though music
software applications that use ASIO will allow you to launch the Delta panel
from within the program. If not, we suggest creating an alias of the control
panel by highlighting it and pressing Command (Apple key)+M. Then, drag
the alias to the desktop.
8•5. With the Delta 1010 PCI card installed, restarting the computer will load the
Delta 1010 extension. You will be able to visually see the Delta extension icon
pass by as your system loads the extensions.
6. Go to the Apple menu |Control Panel | Sound. You should see the “built-in”
sound icon, plus the Delta icon if your Delta 1010 is properly installed. If your
music program does use ASIO, leave the Sound Manager driver set to "built-in"
for both Sound In and Sound Out. If your program does not use ASIO
(check your software’s documentation) and you will be using the Sound
Manager to communicate with your Delta 1010, set Sound In and Sound Out
to “Delta.” See the section “Hardware Settings Page” in the Delta 1010
“Control Panel Software” section for information on selecting Sound Manger
inputs and outputs.
Your Delta 1010 is now ready for audio input and output. To configure the Delta
for MIDI, you will need to have Opcode’s OMS (Open Music System) installed
first. OMS is provided on the CD that came with the unit. Opening the OMS
2.3.7 folder and double-clicking on the “Install OMS 2.3.7” program will install
OMS in your system. To install the Delta MIDI driver once OMS is properly
installed:
1. Open the “Delta Products”folder on the driver CD, then the Delta 1010 Mac
folder. Locate the “Delta OMS Driver.”
2. On your Macintosh hard drive, in your System folder, you will find an “OMS
Folder.”Drag the Delta OMS Driver into the OMS Folder.
3. Restart your computer.
To Configure your Delta 1010 MIDI in OMS, go to the Apple Talk Control Panel
or Chooser under the Apple Menu, and make sure AppleTalk is turned off (this
is recommended, although OMS will sense that it is on and prompt you to turn it
off). If you are configuring OMS for the first time, follow these instructions to
configure OMS.
1. In the Opcode folder, which you will find on your hard drive, locate the OMS
Applications folder, then “OMS Setup." Double click on OMS Setup.
2. OMS will inform you that it has not yet been configured. Click OK.
3. The Create A New Studio Setup dialog box now appears. Click OK.
4. The "OMS Driver Search" box asks you to choose the port on which you've
attached the Deta MIDI (either Modem or Printer). DO NOT choose a port,
just click "Search." OMS begins Searching.
5. "OMS Driver Setup" shows the "Delta" MIDI in a list when OMS successfully
finds the driver. Click OK. OMS will now define (shows "Identifying") the
Delta output port. The "OMS MIDI Device Setup" dialog box will appear
showing the Delta's output port with a check box to the left of the port,
indicating that the port is enabled. Now click on OK.
6. Next, the "My Studio Setup" appears with a 'file save' dialog box over it. You
will now need to save your new Studio Setup before you can assign an
instrument to the Delta's MIDI output and input. Assign your instrument and
you are done. You may now exit OMS Setup by quitting the application.
The interesting part is that the Audiophile also is a delta series card. (See box)
blaylok:
Thank you Smiles
Navigation
[0] Message Index
Go to full version