Print

[ivanshpak]

Hello friends!

There are Two Marathon G4 PowerRack (Quicksilver) 1GHz generation, a lot of memory, several ATTO cards (UL3D/UL4D) included, as well as a Stealth Serial Port.

I can’t show you photos because these two computers are in a warehouse in LA to which I don’t have access right now.
Payment by PayPal

I see the amount is around $300 excluding shipping to your address in US (two boxes 42.80 lb | 20"(L) x 20"(W) x 8"(H))

[smilesdavis]

International possible?

[ivanshpak]

International possible?

yes!

[Pushpull76]

Hello friends!

There are Two Marathon G4 PowerRack (Quicksilver) 1GHz generation, a lot of memory, several ATTO cards (UL3D/UL4D) included, as well as a Stealth Serial Port.

I can’t show you photos because these two computers are in a warehouse in LA to which I don’t have access right now.
Payment by PayPal

I see the amount is around $300 excluding shipping to your address in US (two boxes 42.80 lb | 20"(L) x 20"(W) x 8"(H))

Are the marathon g4 Powerrack still available? i'm only interested in the marathon hardware rack, not the G4.

[smilesdavis]

there were variations in the hardware for each g4 model... what would be the use if not use it with the model it was configured for may i ask?

[refinery]

Yes to be clear, this is not the same as the handles that could be placed on any g4 to put them in a rack. These are full rack mount cases designed to have the internals from a G4 transplanted into them.

They're also hideously ugly IMO compared to the Apple cases... Basically just ATX rack mount cases with custom backplanes.

[Knezzen]

Would either way love to have one in my life and put my MDD in it

[IIO]

i am actually looking for one, but it should be already in europe of course.

and i also would not mind to get a case which is a bit deeper (or higher?) so that i can add some extra modifications/periphery.

my knowlegde about topics such as "airflow" or "grounding" is around zero. is that a problem when i use a case not specifically made for a quicksilver?

[PPC_505]

i am actually looking for one, but it should be already in europe of course.

and i also would not mind to get a case which is a bit deeper (or higher?) so that i can add some extra modifications/periphery.

my knowlegde about topics such as "airflow" or "grounding" is around zero. is that a problem when i use a case not specifically made for a quicksilver?

I can't speak specifically for the QS, but I would think if you can find riser studs that match up with the logic board, you could do some punching and screwing with a standard PC case backplane to make it work. Absolute worst case, you can always make something out of wood or plexi.