Pages: [1]   Go Down

Author Topic: Just PC guy looking for help with a MAC.  (Read 3423 times)

Walt_Alaksa

  • 1 MB
  • *
  • Posts: 1
  • New Member
Just PC guy looking for help with a MAC.
« on: November 19, 2020, 07:52:29 PM »

I have older professional video cameras, Canon XLs, that use firewire. I bought a Mac 5G to try and use the Apple firewire to capture and edit. I have an AJA video capture card and system that only works with Apple Cut Pro 5 or older. So I'm living in the past. I need to get my G5 back to the 9 OS. Any help and advice would be appreciated.
Logged

GaryN

  • Project Patron
  • 1024 MB
  • *
  • Posts: 1586
  • active member
Re: Just PC guy looking for help with a MAC.
« Reply #1 on: November 19, 2020, 09:27:24 PM »

You sir, have what is often referred to as a conundrum.
Your G5 cannot and will not boot OS9 directly. It will run OS9 Classic - a stopgap mostly-functional OS9 that helped bridge the divide between OS9 and OSX. You need to install OSX 10.4 "Tiger" which will allow installation and operation of OS9 Classic in a sort of "sandbox" inside OSX.

Here's the conundrum: That capture card may or may not work under Classic. Because Classic runs "inside" OSX, it does not normally get direct access to I/O like Firewire ports. There are many, many folks who keep older Macs that do natively boot OS9 or earlier to run things like older drum scanners, lithographs etc. and similar stuff that was never ported to OSX. Heck, there are even a few dummies around here that use it to produce music…

It's a crapshoot with no better than even money odds that you can make your G5 happen here. You can only load up, spit into the wind and try.

Download the dmg of the retail Tiger DVD here: https://www.macintoshrepository.org/12343-mac-os-x-10-4-tiger-for-ppc
Install it.
If OS9 is not included in that, grab a Universal drag and drop here:http://macos9lives.com/smforum/index.php/topic,1859.0.htm

You'll then have to see how well Final Cut will run under Classic, if it runs at all. THEN you can try to access the capture card and import something.
If it works, thank your lucky angels. If not, your best… Hell, your ONLY real solution will be to grab the fastest G4 you can find like a 2x1.25 GHz or 2x1.42 GHz Mirror Drive Door model that immediately preceded the G5. Anything older (and slower) than that will have you watching your lawn grow waiting for stuff to render, transcode or whatever.

Good luck.
Logged

teroyk

  • 512 MB
  • *****
  • Posts: 623
  • -
Re: Just PC guy looking for help with a MAC.
« Reply #2 on: November 21, 2020, 09:03:45 AM »

I have older professional video cameras, Canon XLs, that use firewire. I bought a Mac 5G to try and use the Apple firewire to capture and edit. I have an AJA video capture card and system that only works with Apple Cut Pro 5 or older. So I'm living in the past. I need to get my G5 back to the 9 OS. Any help and advice would be appreciated.

Actually Apple Final Cut Pro 5 needs OS X. And if I remember right Canon XL doesn't need video capture card with G5. Just plug it to firewire port and it should work any version of Final Cut.
Logged
Pages: [1]   Go Up
 

Recent Topics