Please login or register.

Login with username, password and session length
Advanced search  

News:

Main Page
Pages: [1]   Go Down

Author Topic: Digi Mix Core and Sample Cell  (Read 7850 times)

LoFizle

  • 16 MB
  • ***
  • Posts: 28
  • new to the forums
Digi Mix Core and Sample Cell
« on: November 28, 2018, 02:03:28 PM »
Anyone know, if a Digi Mix Core and a SampleCell can be used together with out the need of a digi interface?

The manual doesn’t really touch on this. Says the Sample cell i/o show up in the digi I/o, but it says nothing about if you still need a interface.

Although it mentions haveing a two track tdm system?

Thanks
« Last Edit: November 28, 2018, 03:56:37 PM by LoFizle »
Logged

macStuff

  • Guest
Re: Digi Mix Core and Sample Cell
« Reply #1 on: November 29, 2018, 04:50:27 AM »
pretty sure the samplecell can be used on its own

two track tdm? is probably referring to audiomedia card?
Logged

mrhappy

  • 1024 MB
  • ******
  • Posts: 1156
  • new to the forums
Re: Digi Mix Core and Sample Cell
« Reply #2 on: November 29, 2018, 07:17:10 PM »
Yeah... not sure about Sample Cell but to make use out of a Mix system you'll need an interface hooked up.
Logged

macStuff

  • Guest
Re: Digi Mix Core and Sample Cell
« Reply #3 on: November 30, 2018, 12:46:46 AM »
samplecell has direct outs on the back bracket of the card itself --  4 x stereo 1/4" as far as i know
Logged

LoFizle

  • 16 MB
  • ***
  • Posts: 28
  • new to the forums
Re: Digi Mix Core and Sample Cell
« Reply #4 on: December 05, 2018, 10:46:02 AM »
I know the SampleCell can be used by itself, and that it has 1/4 ins and outs. An I know the mix system needs a interface, but I’m wondering if the inface can be side stepped if the SampleCell is connected to the mix core with the tdm bridge.

Anybody have a Mixcore and sample cell they would be willing to test this theory. Basically  just unplug the digi interface and see if it still works?
Logged

Enabler

  • 64 MB
  • ****
  • Posts: 75
Re: Digi Mix Core and Sample Cell
« Reply #5 on: December 25, 2018, 09:49:22 AM »
Unfortunately No.......
SampleCell has 8 outputs 4 Stereo Pairs using a Ring, Tip sleeve cable
In order to send those outputs to a Mix system you would need a TDM Piggyback board
that was sold separately back in the day. Think of the piggy back board as a Digital Out like on
your favorite hardware sampler. It only worked in one direction sending the SampleCells
output Digitally to a Protools Mix TDM Bus.
Logged

macStuff

  • Guest
Re: Digi Mix Core and Sample Cell
« Reply #6 on: December 26, 2018, 02:12:52 PM »
Happy holidays enabler
Logged
Pages: [1]   Go Up

Recent Topics

[Off Topic] What did you do with your PowerPC Mac today? by smilesdavis Yesterday at 11:10:58 AM
[Off Topic] Music Faves by jojo2k Yesterday at 07:57:27 AM
[Hardware] Powerbook for OS9 and SVP by BimmyLee August 29, 2025, 09:53:37 PM
[Hardware] MDD Freeze / J20 RAM Slot by aBc August 29, 2025, 07:41:14 PM
[Hardware] G4 MDD only boots using ADC monitor power button by smilesdavis August 29, 2025, 09:31:06 AM
[Hardware] Rev A/B iMac Freezes on Startup by keithiepoo August 28, 2025, 04:42:38 AM
[Off Topic] Power Use by torvan August 27, 2025, 11:01:40 PM
[Mac OS 9, Hacks & Upgrades] help my b+w g3 450 is haunted! upgrading from 8.6 to 9.0 fine but 9.1 ruins it by DieHard August 27, 2025, 04:50:57 PM