Pages: [1] 2   Go Down

Author Topic: digi 192 i/o (2002) compatible /w mac os9, but requires PT HD 5.3.1  (Read 11122 times)

macStuff

  • Guest


https://www.sweetwater.com/store/detail/192io
https://archive.digidesign.com/compato/os9/hd/
http://archive.digidesign.com/download/531/
http://archive.digidesign.com/download/cs/531r2/
http://archive.digidesign.com/download/cs/531cs7/
Quote
Digidesign's Flagship Pro Tools|HD Interface!
The 192 I/O is all about sounding phenomenal — rivaling similar products more than double its price. On top of offering up to 16 channels of analog and digital I/O, the 192 I/O lets you take your pick over a flexible range of connection types. And with 24-bit/192kHz A/D and D/A operation, the Digidesign 192 I/O is your one-stop choice for getting your tracks into the world of Pro Tools|HD. An expansion port onboard lets you directly connect another 192 I/O or its little brother the 96 I/O. For clarity and precision, at an unbeatable value — it's got to be the Digidesign 192 I/O.

Digidesign 192 I/O Converter and Pro Tools|HD Interface Features at a Glance:
50 possible inputs and outputs
Supports up to 16 simultaneous channels of high-definition I/O
Extremely flexible analog and digital I/O
Card option bay for analog or digital I/O expansion with 192 AD, 192 DA, or 192 Digital cards
World-class 24-bit/192kHz A/D and D/A conversion
Comes with a wide range of digital I/O, including 8 channels of AES/EBU I/O, 8 channels of TDIF I/O, 16 channels of ADAT I/O, and 2 additional channels of AES/EBU or S/PDIF I/O
Word (1x) and Slave Clock (256x) input/output
Switchable, real-time sample rate conversion on digital inputs on the 192 Digital card, which allows easy streaming of digital signals at any sample rate
Soft-Clip Limiter that allows higher levels to disk for punchier, hotter recordings
Expansion Port that allows for direct connection of another 192 I/O or 96 I/O

Quote
Legacy Peripheral port that allows for connection of:
 888|24 (1998), http://www.oldschooldaw.com/forums/index.php/topic,4927 
(excluding the original from 1994 http://www.oldschooldaw.com/forums/index.php?topic=1081.0)
 882|20 (1999), http://www.oldschooldaw.com/forums/index.php/topic,355
 1622, (1999) http://www.oldschooldaw.com/forums/index.php/topic,1077
 24-Bit ADAT Bridge I/Os, (1998) http://www.oldschooldaw.com/forums/index.php/topic,970
(adat bridge must be at 48kHz or lower sample rate)
(does this mean 20-bit ADAT bridge not compatible???)

Set yourself up with the best Pro Tools|HD interface from Digidesign, the 192 I/O!

am i reading this correct? according to this document
pro tools 5.3.1 is required to be able to use the following devices?

Quote
Digidesign HD Audio Interfaces (one required)
192 I/O
192 Digital I/O
96 I/O

do any of the users here use HD hardware with OS9?

i think it only works with this specific version
here is the download image:
http://www.mediafire.com/file/ke00307en7ctw78/ptTDM_v5.3.1.img.bin

[youtube]http://www.youtube.com/watch?v=STpfk0JANQg[/youtube]
https://www.sweetwater.com/sweetcare/articles/96-audio-interface-expandable-192-audio-interface-optional-digital/

[youtube]http://www.youtube.com/watch?v=BzgwYlgDUXU[/youtube]
« Last Edit: December 24, 2017, 12:01:47 PM by macStuff »
Logged

mrhappy

  • 1024 MB
  • ******
  • Posts: 1156
  • new to the forums
Re: digi 192 i/o (2002) compatible /w mac os9, but requires PT HD 5.3.1
« Reply #1 on: December 25, 2017, 09:29:51 PM »

Yes PT 5.3.1 was to enable HD hardware on OS9... Conversely, PT 6.4.1 let you use 'Mix' era hardware with OS X. I've never tried the 5.3.1/HD setup but I AM curious if all the OS9 plugins would work. I think the vast majority of people that purchased an HD interface went directly to the new fangled OS X! ;D

http://archive.digidesign.com/compato/os9/hd/
Logged

Knezzen

  • Staff Member
  • 1024 MB
  • ******
  • Posts: 1213
  • Pro Tools Addict!
    • Macintosh Garden
Re: digi 192 i/o (2002) compatible /w mac os9, but requires PT HD 5.3.1
« Reply #2 on: January 16, 2018, 03:34:40 AM »

I did use HD hardware with OS9 and PT 5.3.1. All plugins I had in 5.1.3 with MIX hardware worked as long as you kept bit/khz at the most 24bit/48khz.
Logged
Pro Tools addict and staff member at Mac OS 9 Lives!, System 7 Today and Macintosh Garden.

mrhappy

  • 1024 MB
  • ******
  • Posts: 1156
  • new to the forums
Re: digi 192 i/o (2002) compatible /w mac os9, but requires PT HD 5.3.1
« Reply #3 on: January 16, 2018, 07:28:49 AM »

Ahh... that's good to know!! ;D
Logged

jimmy3189

  • 4 MB
  • **
  • Posts: 5
  • new to the forums
Re: digi 192 i/o (2002) compatible /w mac os9, but requires PT HD 5.3.1
« Reply #4 on: February 05, 2018, 04:15:21 PM »

I'm curious, I'm pretty sure they refreshed the 192's about midway through it's lifecycle, we currently have 3 in my 'normal' OS X studio. I know for a fact that one of them is an older one and one is a newer one. I'll try and take pictures with the lids off at some point.

Do both versions work in OS 9?
Logged

mrhappy

  • 1024 MB
  • ******
  • Posts: 1156
  • new to the forums
Re: digi 192 i/o (2002) compatible /w mac os9, but requires PT HD 5.3.1
« Reply #5 on: February 05, 2018, 06:49:48 PM »


Do both versions work in OS 9?

Don't know for sure but we might as well find out! ;D
Logged

macStuff

  • Guest
Re: digi 192 i/o (2002) compatible /w mac os9, but requires PT HD 5.3.1
« Reply #6 on: February 06, 2018, 03:46:45 PM »

I'm curious, I'm pretty sure they refreshed the 192's about midway through it's lifecycle, we currently have 3 in my 'normal' OS X studio. I know for a fact that one of them is an older one and one is a newer one. I'll try and take pictures with the lids off at some point.

Do both versions work in OS 9?

only if you are using the specific version of PT HD : v5.3.1 which i posted above.
Logged

macStuff

  • Guest
Re: digi 192 i/o (2002) compatible /w mac os9, but requires PT HD 5.3.1
« Reply #7 on: February 06, 2018, 03:48:29 PM »

Yes PT 5.3.1 was to enable HD hardware on OS9... Conversely, PT 6.4.1 let you use 'Mix' era hardware with OS X. I've never tried the 5.3.1/HD setup but I AM curious if all the OS9 plugins would work. I think the vast majority of people that purchased an HD interface went directly to the new fangled OS X! ;D


exactly correct
+ exactly the point of the post!
to highlight the fact that it was made compatible with os9 for those people who chose to stay on os9
Logged

Trace-Elliot

  • 32 MB
  • ***
  • Posts: 54
  • brand new member
Re: digi 192 i/o (2002) compatible /w mac os9, but requires PT HD 5.3.1
« Reply #8 on: July 02, 2019, 02:18:38 PM »

exactly correct
+ exactly the point of the post!
to highlight the fact that it was made compatible with os9 for those people who chose to stay on os9

but its not the same workhorse as Pro Tools is with the Mix Hardware on Mac OS 9 .
its very fragile and buggy.
Logged
tons of Digidesign Hardware and historic apple maschines .... based in germany ...

AtariMan

  • 64 MB
  • ****
  • Posts: 107
Re: digi 192 i/o (2002) compatible /w mac os9, but requires PT HD 5.3.1
« Reply #9 on: September 13, 2022, 11:53:22 AM »

Who managed to use plug-ins from Mix Plus on HD 5.3.1 hardware?
Logged
Pro Tools TDM 5.1.1

AtariMan

  • 64 MB
  • ****
  • Posts: 107
Re: digi 192 i/o (2002) compatible /w mac os9, but requires PT HD 5.3.1
« Reply #10 on: September 13, 2022, 11:55:14 AM »

I did use HD hardware with OS9 and PT 5.3.1. All plugins I had in 5.1.3 with MIX hardware worked as long as you kept bit/khz at the most 24bit/48khz.
Hello. Can you write instructions on how to use plugins from Mix Plus on HD 5.3.1 in OS 9? Thank you in advance.
Logged
Pro Tools TDM 5.1.1

smilesdavis

  • 512 MB
  • *****
  • Posts: 890
  • New Member
Re: digi 192 i/o (2002) compatible /w mac os9, but requires PT HD 5.3.1
« Reply #11 on: September 13, 2022, 01:47:06 PM »

G4 OS9 HD Core running Logic white key - digi 192 - Intel OSX HDX running PT201x

would this allow for os9 vst plugins to be used inside of pro tools on intel as inserts somehow?
Logged
LF: Steinberg Cubase MAC Standard/Score/Audio v1-3, especially v1 Cubase Audio ADB Dongle, Cubase VST/24, VST/32, IK T-Racks v1 (ADB Dongle version). Jupiter Systems JVP (Box only), Pro Tools v1-4 (Incomplete as well) -> PM ME if you have any of those.

tunedbytad

  • 128 MB
  • ****
  • Posts: 163
  • ProTools 5 addict
Re: digi 192 i/o (2002) compatible /w mac os9, but requires PT HD 5.3.1
« Reply #12 on: September 15, 2022, 10:14:24 PM »

I did use HD hardware with OS9 and PT 5.3.1. All plugins I had in 5.1.3 with MIX hardware worked as long as you kept bit/khz at the most 24bit/48khz.
Hello. Can you write instructions on how to use plugins from Mix Plus on HD 5.3.1 in OS 9? Thank you in advance.

I would love to know as well.
I tried and tried and could not make it work
Logged
Hi, My name is Tad
I have a PMG4 problem
aka tunedbytad aka ProTools4 aka NotoriouSS

AtariMan

  • 64 MB
  • ****
  • Posts: 107
Re: digi 192 i/o (2002) compatible /w mac os9, but requires PT HD 5.3.1
« Reply #13 on: September 15, 2022, 11:15:53 PM »

This is what happens when I try to run the Mix Core plugin on the HD Core. DAE Error.
Logged
Pro Tools TDM 5.1.1

smilesdavis

  • 512 MB
  • *****
  • Posts: 890
  • New Member
Re: digi 192 i/o (2002) compatible /w mac os9, but requires PT HD 5.3.1
« Reply #14 on: September 15, 2022, 11:18:08 PM »

http://archive.digidesign.com/compato/os9/hd/

under Other card options

In addition, you must install the DigiSystem Init v 5.1.1 in your Extensions folder. (included on the Pro Tools 5.3 CD) Playback is limited to samples at 44.1 and 48 kHz.

sounds familiar
Logged
LF: Steinberg Cubase MAC Standard/Score/Audio v1-3, especially v1 Cubase Audio ADB Dongle, Cubase VST/24, VST/32, IK T-Racks v1 (ADB Dongle version). Jupiter Systems JVP (Box only), Pro Tools v1-4 (Incomplete as well) -> PM ME if you have any of those.

tunedbytad

  • 128 MB
  • ****
  • Posts: 163
  • ProTools 5 addict
Re: digi 192 i/o (2002) compatible /w mac os9, but requires PT HD 5.3.1
« Reply #15 on: September 16, 2022, 11:38:04 AM »

This is what happens when I try to run the Mix Core plugin on the HD Core. DAE Error.

exactly how it happens to me

right when you load a plugin into a session
it is looking for : TDMII plugin / ilok extension / ilok usb device / ilok authorization
Logged
Hi, My name is Tad
I have a PMG4 problem
aka tunedbytad aka ProTools4 aka NotoriouSS

smilesdavis

  • 512 MB
  • *****
  • Posts: 890
  • New Member
Re: digi 192 i/o (2002) compatible /w mac os9, but requires PT HD 5.3.1
« Reply #16 on: September 16, 2022, 01:51:00 PM »

maybe the fixed the loophole
Logged
LF: Steinberg Cubase MAC Standard/Score/Audio v1-3, especially v1 Cubase Audio ADB Dongle, Cubase VST/24, VST/32, IK T-Racks v1 (ADB Dongle version). Jupiter Systems JVP (Box only), Pro Tools v1-4 (Incomplete as well) -> PM ME if you have any of those.

tunedbytad

  • 128 MB
  • ****
  • Posts: 163
  • ProTools 5 addict
Re: digi 192 i/o (2002) compatible /w mac os9, but requires PT HD 5.3.1
« Reply #17 on: September 18, 2022, 06:21:44 PM »

???? what ????
Logged
Hi, My name is Tad
I have a PMG4 problem
aka tunedbytad aka ProTools4 aka NotoriouSS

smilesdavis

  • 512 MB
  • *****
  • Posts: 890
  • New Member
Re: digi 192 i/o (2002) compatible /w mac os9, but requires PT HD 5.3.1
« Reply #18 on: September 18, 2022, 10:34:35 PM »

currently trying to buy pt 6.4.1 and the ilok is blue and has a card in it
Logged
LF: Steinberg Cubase MAC Standard/Score/Audio v1-3, especially v1 Cubase Audio ADB Dongle, Cubase VST/24, VST/32, IK T-Racks v1 (ADB Dongle version). Jupiter Systems JVP (Box only), Pro Tools v1-4 (Incomplete as well) -> PM ME if you have any of those.
Pages: [1] 2   Go Up
 

Recent Topics