Please login or register.

Login with username, password and session length
Advanced search  

News:

Pages: [1]   Go Down

Author Topic: Help with IDing/settings/software for PCI Powermac CPU modules  (Read 5769 times)

MacOS Plus

  • 256 MB
  • *****
  • Posts: 418
  • The 9serve Lives!
Help with IDing/settings/software for PCI Powermac CPU modules
« on: December 10, 2016, 01:35:54 PM »

  Last week I was sorting through some of my old Mac parts and found a box I'd sorta forgotten about.  It contained a whole pile of CPU cards for Beige-generation PCI Powermacs.  I remember now I bought them in a bulk lot many years ago but never needed many of them.  Now that I'm busy trying to put my older Powermacs back into service and good uses, I decided it was time to finally go through all the CPU cards to identity them, test them, and trace the software I didn't already have before it's permanently unavailable.

  I went about the testing using a Power Computing Power Center 150 as the host.  All of the cards are either G3 type or 604e.  Out of all the cards tested there were only three I couldn't get running for one reason or another.  They are as follows as far as I can identify them:

1. NewerTech MAXpowr 604e(?) 225MHz
2. XLR8 MACh Speed 604e 225MHz
3. Mactell PowerJolt(?) G3 250MHz (from similar photos online I believe this is the make/model)




1. I don't have reference material for this NewerTech model.  The jumper settings don't seem to have any effect, nor does it matter if I set them in the two standard positions from the manual for the later G3 versions.  I don't know if any software was available for it.

2. While I was able to locate and download a software CD image for the later G3 versions, the 604e XLR8 version I don't have jumper settings for nor any software it may have come with.

3.  The Mactell (pretty sure) card is fairly distinctive because it features rotary switches instead of DIP switches.  I have another virtually identical card with a completely different heatsink that I HAVE been able to figure out and get working.  The MACh Speed software was still installed at the time and was able to read its speed setting.  I don't have any Mactell software or reference material.  The closure statement from that company is the only remnant page I could find in the Wayback Machine online.  (Thanks, Apple, for completely ruining them - that was real classy.)

  It is entirely possible that these three cards are defective but I would like to test them fully before concluding that and junking them.  If any of you can help with information or software for these cards it would be greatly appreciated!
Logged
Pages: [1]   Go Up

Recent Topics