Please login or register.

Login with username, password and session length
Advanced search  

News:

Pages: [1]   Go Down

Author Topic: SpeedTools ATA Hi-Capacity Driver (for greater than 128gb drives)  (Read 5371 times)

supernova777

  • Guest

http://www.speedtools2.com/ATA6.html
there is a reference to mac os 9 in this page..
can this be used to overcome 128gb limit on sawtooth/digital audios?

Quote
If you plan to use this drive under BOTH MacOS X and true MacOS 9 (not the Classic shell), please download a copy of our SpeedTools ATA Hi-Cap Driver User's Guide file. There you will find a full explanation of possible issues involved and several recommendations for eliminating possible problems.

http://www.speedtools.com/Users%20Guides/ATA%20Hi-Cap%20Guide.pdf
Quote
Device driver (kernel extension) to enable over 128 GB addressing of ATA hard disk drives on G3 and Pre-Mirrored Door G4 Macintosh computers

Quote
Safe Partitioning for Hi-Cap support with MacOS 9 and MacOS X:
If you plan to boot your machine natively into both MacOS 9 and X, you will need to partition
the drive under MacOS 9 using Intech’s Hard Disk SpeedTools (a.k.a. HDST, sold seperately)
product which supports extended capacity drives under MacOS 9. If you don’t have this
product, you can buy it directly from Intech’s web site (http://www.speedtools.com).

Once you have obtained HDST, boot your computer into MacOS 9 and do the following:
Run HDST. Create your MacOS X bootable partition first. It can be up to 131,071 Megabytes
(about 127.99 Gigabytes), but no larger. Allocate the rest of the drive according to your
needs. If you wish to have separate OS 9 and X partitions, make sure that both partitions
are fully allocated BEFORE the 128 GB boundary.

Here are two HDST partitioning examples for a 250 GB drive for users of both MacOS 9 &
X:

1) Simplest partition scheme - create a 131,071 Megabyte volume and allocate the rest to
a second volume. Install both MacOS 9 and X onto the first partition.

2) A more complex sample scheme - create two 50,000 Megabyte volumes, a third 31,071
Megabyte volume, and allocate the rest to one or more volumes. You can install OS 9 and
X onto any of the first three partitions.

The important point here is that no single volume spans the 128 Gigabyte barrier.
Note that in our more complex example the first three volumes add up to exactly 131,071
(50,000 + 50,000 + 31,071)
Logged
Pages: [1]   Go Up

Recent Topics

[Off Topic] What did you do with your PowerPC Mac today? by smilesdavis Yesterday at 11:10:58 AM
[Off Topic] Music Faves by jojo2k Yesterday at 07:57:27 AM
[Hardware] Powerbook for OS9 and SVP by BimmyLee August 29, 2025, 09:53:37 PM
[Hardware] MDD Freeze / J20 RAM Slot by aBc August 29, 2025, 07:41:14 PM
[Hardware] G4 MDD only boots using ADC monitor power button by smilesdavis August 29, 2025, 09:31:06 AM
[Hardware] Rev A/B iMac Freezes on Startup by keithiepoo August 28, 2025, 04:42:38 AM
[Off Topic] Power Use by torvan August 27, 2025, 11:01:40 PM
[Mac OS 9, Hacks & Upgrades] help my b+w g3 450 is haunted! upgrading from 8.6 to 9.0 fine but 9.1 ruins it by DieHard August 27, 2025, 04:50:57 PM