Pages: [1]   Go Down

Author Topic: Acard 6280M PCI  (Read 4334 times)

macStuff

  • Guest
Acard 6280M PCI
« on: May 28, 2019, 03:53:19 AM »

https://web.archive.org/web/20060226075536/http://www.acard.com.tw/english/fb01-product.jsp?idno_no=124&prod_no=AEC-6280M&type1_title=Adapters&type1_idno=3

Quote
Features
Supports true Mac OS X
The same firmware for OS 8.5, OS 9 and OS X
Supports Ultra 133/100/66/33 hard drives
Supports HDD larger than 137GB

Specifications
Coexist with on-board IDE controller
Open Firmware interface
Max. 4 IDE devices

IDE Bus
Dual independent channel of IDE bus
Supports Ultra DMA 133/100/66/33 mode
Supports 48-bit addressing with Big Drive technology
Data transfer rate up to 133MB/s per channel

PCI Bus
32-bit PCI Bus Master for up to 133MB/s data transferring rate
Supports Scatter / Gather function
Automatic FIFO threshold selection
Low command overhead
True PCI Plug and Play

OS Compability
Mac OS X
Mac OS 8.5, OS 9 and higher

https://web.archive.org/web/20060923083802/http://www.acard.com.tw/upload/20050218020048482IDE.pdf
https://web.archive.org/web/20060116101420/http://www.acard.com.tw/upload/200411120458353506280m(E).pdf
Logged

macStuff

  • Guest
Re: Acard 6280M PCI - sata to esata modification
« Reply #1 on: May 28, 2019, 03:54:04 AM »

this is somethign ive never seen befoer i think its a custom hackjob inserting an ide/sata adapter onto the low profile card and then attach to the pci bracket - they must have swapped out a custom bracket?

https://www.macuser.de/threads/e-sata-fuer-powermac-g3-beige-und-os9.716880/
Logged

MacTron

  • Staff Member
  • 2048 MB
  • ******
  • Posts: 2116
  • keep it simple
Re: Acard 6280M PCI - sata to esata modification
« Reply #2 on: May 28, 2019, 09:59:44 AM »

this is somethign ive never seen befoer i think its a custom hackjob inserting an ide/sata adapter onto the low profile card and then attach to the pci bracket - they must have swapped out a custom bracket? g]
https://www.macuser.de/threads/e-sata-fuer-powermac-g3-beige-und-os9.716880/
Yes... that's it. But the main issue is the bidirectional PATA to SATA adaptor. I have one and it is very unreliable. I prefer the Unidirectional ones.
Logged
Please don't PM about things that are not private.

macStuff

  • Guest
Re: Acard 6280M PCI
« Reply #3 on: May 30, 2019, 08:42:31 AM »


better image

Yes... that's it. But the main issue is the bidirectional PATA to SATA adaptor. I have one and it is very unreliable. I prefer the Unidirectional ones.
i just tested my Acard 6880M (in normal mode) and it worked fine with a similar type of adapter; was able to boot and got speeds around 70MB/s; not the top performing card but works well enough; still alot better performance than in the early 2000s with built in controller (ata66 > ata133 difference)
Logged

macStuff

  • Guest
Re: Acard 6280M PCI
« Reply #4 on: June 02, 2019, 05:47:25 AM »

Logged
Pages: [1]   Go Up
 

Recent Topics