Mac OS 9 Lives
Digital Audio Workstation & MIDI => Digital Audio Workstations & MIDI Applications => Logic Audio by Emagic => Topic started by: chietronix on August 11, 2024, 02:21:02 AM
-
Hello everyone.
Please i ask you. I am Japanese. My English is very poor.
I using Logic Platinum 4.8.1 on OS 9.2.2. I use 3 stereo track only but show disk is too slow or system overload. I setting audio hardware window and setting I/O buffer size 1 and 16 busses and universal track mode checked on audiowerk 2.
Where I mistake it? Please tell me.
OS9 400mhz
-
I/O buffer size 1 and 16 busses and universal track mode checked on audiowerk 2.
i am not a user of logic.
do i understand right: you use a very small disk buffer size of 1? this could be the problem, try the biggest setting for this.
-
Thank you. changed buffer size 1 to .125. But disk is too slow showing. System memory requirement is 23.2 mb. Put in software monitoring.
-
"There will be some latency when monitoring through the computer during recording and, as ever, the longer the buffer size you set up, the longer the latency. However, trying to work with too small a buffer size in an attempt to reduce latency can lead to glitches in the audio, though there's a monitoring speed setting you can adjust too. My own preference is to forgo the luxury of monitoring via software effects and use a conventional mixer to monitor the input being recorded. After all, any audible latency is unacceptable for musical applications."
https://www.soundonsound.com/reviews/emagic-audiowerk2 (https://www.soundonsound.com/reviews/emagic-audiowerk2)
"If you want to use this card just for its SP/dif: no problem. Used it on many different pc's without any installation troubles, only prg's like wavelab or fruity loops needed a little buffer-tweaking, that's all. The analog I/O's are not bad, better than most budget stuff like creative crap etc. but not really high-end.
The real problem comes when you want to use softsynths in Logic (never tried in cubase). The mme driver doesn't come below 75 MS, the Asio driver reaches 7,5 ms to play an instrument, fair enough; but every time you want to mixdown a track you'll need to go back to a sad 88ms to keep it crack-free..."
https://sonicstate.com/digital/comments.cfm?modelID=178 (https://sonicstate.com/digital/comments.cfm?modelID=178)
-
Please provide some additional details about your situation. It would be helpful to know more specific information about your environment.
1. Are you using any plugins on the audio channels you are recording into Logic?
2. Is the computer operating properly for other uses? Has the disk been checked for any hardware problems?
3. How much RAM is in the computer? Have you increased the amount of RAM allocated to Logic? Is Virtual Memory enabled in the Memory control panel?
-
Thank you for reply. I am not very understand for Memory and virtual memory and RAM for mac os9. I put attachment file. I am very sorry for Japanese. Please help me.
-
I am not very understand for Memory and virtual memory and RAM for mac os9.
virtual memory is similar to browser cache. it works for photoshop, but not for logic audio.
many audio programs want "virtual memory" OFF or they do not work correctly.
"virtual memory" is a very old system. it is no problem to have it OFF for any operation on the computer.
default - off - off
-
Thank you. I Did just off the virtual memory. But Logic was disk i/o 80%. I using only 3 stereo channels.
-
Thank you IIO.
I was format the OS9 G4 yesterday. But not changed. Then I using iMac on OS9 on classic mode.
iMac is:
Memory:1 GB. Disk cash:8160KB. I don't know RAM.
Logic 4.8.1 is working on iMac by only 3 stereo channels.
BTW. There is change the memory small memory and large memory setting on control + click.
What can I do setting there. Please tell me.
-
Play the song start the this error message coming.
"error while trying to synchronize audio and midi sample rate 40679 recognized check conflict between logic and external device."
Am I lord 48k sample??
-
I would suggest increasing the amount of memory (RAM) that Logic is utilizing. Based off your provided screen-shot, Logic is only being allocated 19MB of RAM, which is very, very low amount.
Keep in mind that the values in that window are in KB, so divide by 1000 for MB.
If the machine has 1GB Memory (RAM), then I would suggest increasing the allocation for Logic to 128MB to start with to test.
Enter "128000" into both boxes. This will make Logic use a minimum of 128MB of RAM, and no more than 128MB of RAM.
"error while trying to synchronize audio and midi sample rate 40679 recognized check conflict between logic and external device."
This error typically means that Logic is unable to keep audo syncronized, and given the conditions you have described, is likely due to Logic not having enough memory (RAM) for all operations.
-
BTW. There is change the memory small memory and large memory setting on control + click.
What can I do setting there. Please tell me.
when an audio program has "19 required", i put it on "20 minimum" and "500 maximum".
but you will notice when maximum is too small: if maximum is too small, later in logic preferences you can not set many tracks for a project or a big buffer size.
but the maximum program size will not affect harddisk performance for audio. this must have other cause.
-
.
but the maximum program size will not affect harddisk performance for audio. this must have other cause.
Yes I suspect a disk issue may be the culprit here, but wanted to eliminate low RAM allocation as a possibility first. Even in OS9 17mb for Logic is pretty slim.
-
Thank you very much everyone.
I changed memory RAM 128MB. Logic is working. I changed the mac G4 to iMac classic mode. And I changed using Audiowerlk2 to M-Audio Firewire410. Firewire410 is better. But Logic's disk I/O is still 60% on 3 stereo channels. I thought I don't know maybe using 24 bit 48kHz samples.
Please tell me ASIO buffer size setting.
Thank you.
-
Thank you very much everyone.
I changed memory RAM 128MB. Logic is working. I changed the mac G4 to iMac classic mode. And I changed using Audiowerlk2 to M-Audio Firewire410. Firewire410 is better. But Logic's disk I/O is still 60% on 3 stereo channels. I thought I don't know maybe using 24 bit 48kHz samples.
Please tell me ASIO buffer size setting.
Thank you.
Don't ever run a DAW in "classic"... is this a type or are you really attempting to run Logic in classic ?
DAWs need direct access to HD and hardware, classic is a Non-starter
-
>DieHard.
How can you be so sure that it can't be used with classic? Are you that knowledgeable about computers? It's been like that for a long time, but some people who know a lot about computers are stingy with their knowledge. This is not the place for that. This is a public place. How important are you?
What I want to know is about the ASIO buffer size in the audio settings of Logic 4 on OS9. Whether it's classic or real, I think it's ridiculous to compete here about such things.
-
??? ;D ;D ;D ;D ;D ;D ;D
diss-qualified
-
>DieHard.
How can you be so sure that it can't be used with classic? Are you that knowledgeable about computers? It's been like that for a long time, but some people who know a lot about computers are stingy with their knowledge. This is not the place for that. This is a public place. How important are you?
What I want to know is about the ASIO buffer size in the audio settings of Logic 4 on OS9. Whether it's classic or real, I think it's ridiculous to compete here about such things.
Your original post "I using Logic Platinum 4.8.1 on OS 9.2.2. I use 3 stereo track only but show disk is too slow or system overload." did not mention classic mode, so I had an "ahhh ha !" moment when I realized this... but I am so sorry that I came across "stinging" and you were offended, that surely was not my intention.
I am guessing something got lost in translation... I was neither attacking you or berating you, sometimes I answer very curt just to get the info out; I was just trying to explain (although I obviously did a bad job), that from doing for this a while, it has been proven time and time again that to have a G4 dedicated to a DAW, you will have major issues in "classic mode" since direct access to the drive and audio hardware is not possible; that being said, notation/scoring programs are fine, but recording tracks is a not optimal by any means. So either boot to OS9 and run an OS9 Audio Host or boot to OSX and run an OS X Audio host. Buffers translating to other buffers in "classic" will inevitable be a problem with performance.
But we don't think we know it all here, please experiment with classic and share with us, you may be victorious where many have failed :)
With modern Macs being so incredibly powerful, many here and myself have ran "DAWs" in Virtual machines with PC and early OS X with success, unfortunately USB pass-thru and other issues with Mac OS 9 (say running on QEMU) are still a milestone so it is actually much easier to visualized a CuBase VST 5 PC or CuBase 1.X OS X Mac on a modern mac than an OS9 DAW on a modern Mac.
-
and once again diehard proves he is and has always been the nicest human around.
-
>DieHard.
Sorry for the late reply. I don't believe in the word "it's impossible." Inventors around the world have been told by others that it's absolutely impossible. But they've achieved it.
As for classic mode on OSX, I was using the classic mode of a 10.6 Mac. I tried it on OSX 10.14.6 with Sheep Shaver running, and although I was able to install the DAW on Sheep Shaver, it didn't work when I pressed the start button. This is because I'm not familiar with OS emulator software. Some people may be doing well.
So, Logic and Reaktor worked on OSX classic mode. I used the memory allocation I learned in this thread, and since I was using M-Audio FireWire 410, I changed the ASIO buffer size in the 410 control panel.
But unfortunately, the OSX with classic mode was broken. It suddenly wouldn't turn on. So I went back to my G4 and installed Logic and Reaktor on the initialized G4.
The G4 is a low-memory machine with only 340MB, but Logic ran on it. I initially regretted initializing it, but I had made a backup, and Logic would always stop halfway before initializing, but after initializing it ran smoothly. However, I realized that the audio files I was loading were 24 bit 48kHz, which is probably why it was so heavy. All of today's sample sources are 24 bit, right? As for Logic's memory, someone in this thread assigned 1GB of memory on OSX to 128M, and it worked, so I divided 128M by 3 for the G4.
In the next reply, I will write down the Logic settings I learned.
I have a new appreciation for DieHard. You are a very gentlemanly person who can apologize to people. As people get older, it becomes more and more troublesome to apologize to people, and we end up leaving problems unsolved. Not everyone is like that, though.
I'm sorry for attacking you so harshly, DieHard. I'm sorry.
-
As for classic mode on OSX, I was using the classic mode of a 10.6 Mac.
that´s what i suspected. :)
when we say "classic mode", we refer to the OS9 enviroment from apple ("bluebox") which comes with 10.4 or lower only.
this kind of "classic enviroment" is better than all the emulators, it is PPC only - but you can not properly do audio and midi with it. also it does not have a memory controlpanel at all.
with later emulations of OS9 it can be different.
do you use a translation engine?
if koreans or japanese use automatic translation, we have to make short and clear statements and we have to avoid typing errors.
-
>IIO
Sorry for the late reply. It was definitely a mistake on my part. The Mac OSX version with Classic Mode was 10.3.
However, one day the power went out and the Mac never turned on again. It had more memory than my main OS 9.2.2.
There's no way to check 10.3 anymore. I tried installing Logic 5 and an emulator on 9.2.2, and Logic 5 is fine. Disk I/O was 60% with 4.8.1, but it's only about 2% with Logic 5.
-
Disk memory is too slow or system overload now.
I utilize Logic 5 and using 5 stereo channels only. Why???
My mac is G4. Memory is 320MB. Speed is 400MHz. Virtual memory is off.
Logic's memory is 126000k.