Mac OS 9 Lives

Mac OS 9 Discussion => Hardware => Video Cards, Monitors & Displays => Topic started by: Knezzen on June 04, 2017, 01:44:28 AM

Title: GeForce4 Ti4600 mounting hole distance?
Post by: Knezzen on June 04, 2017, 01:44:28 AM

Trying to find the mounting hole distance for the Ti4600, does anyone here know?
I know that the plastic clips are 80mm apart, Im thinking of the 4 holes around the GPU itself.

(https://upload.wikimedia.org/wikipedia/commons/thumb/b/b5/GeForce4_Ti_4600_NV25_GPU.jpg/640px-GeForce4_Ti_4600_NV25_GPU.jpg)

Title: Re: GeForce4 Ti4600 mounting hole distance?
Post by: GaryN on June 04, 2017, 06:16:30 PM

Just measured my "loose" board - (from the back, since the heat sink is attached). Oddly, as certain as I was that the measurement would be metric, it's not.
The holes are exactly 1-1/2 inches square.
Go figure…

Title: Re: GeForce4 Ti4600 mounting hole distance?
Post by: mrhappy on June 05, 2017, 05:05:20 AM

Quote from: GaryN on June 04, 2017, 06:16:30 PM

I was that the measurement would be metric

Maybe it is... 3.81cm... a nice round number! ;D ;D

Title: Re: GeForce4 Ti4600 mounting hole distance?
Post by: GaryN on June 05, 2017, 04:45:05 PM

Quote from: mrhappy on June 05, 2017, 05:05:20 AM

Maybe it is... 3.81cm... a nice round number! ;D ;D

What on Earth would we do without you, Hap?

Title: Re: GeForce4 Ti4600 mounting hole distance?
Post by: Knezzen on June 05, 2017, 09:58:01 PM

Gary, could you measure it diagonally as well? The distance from say the lower right to the uppe left hole?

Title: Re: GeForce4 Ti4600 mounting hole distance?
Post by: GaryN on June 06, 2017, 02:56:20 PM

Quote from: Knezzen on June 05, 2017, 09:58:01 PM

Gary, could you measure it diagonally as well? The distance from say the lower right to the uppe left hole?

2-1/8" exactly

Title: Re: GeForce4 Ti4600 mounting hole distance?
Post by: dr bu on June 06, 2017, 03:07:37 PM

make that cm please  :)