Author Topic: flashing + mods for various cards for os9 (9250, 9000, 7000)  (Read 40148 times)

Offline Jacques

  • Enthusiast Member
  • ***
  • Posts: 55
  • Mac and SGI enthusiast
Re: flashing + mods for various cards for os9 (9250, 9000, 7000)
« Reply #40 on: August 20, 2023, 12:00:16 AM »
I’m not sure. I am ready to try but dono what file to use?

Ok so as you have a G3 you shouldn’t have to cut pins 3+11.

This is the page you should be looking at. You will also find loads of other links to the ROM files in the left hand ATI links section.

http://themacelite.wikidot.com/9250-trick

I flashed using the vnc method and it worked well doing it remotely.



Offline Jacques

  • Enthusiast Member
  • ***
  • Posts: 55
  • Mac and SGI enthusiast
Re: flashing + mods for various cards for os9 (9250, 9000, 7000)
« Reply #41 on: August 20, 2023, 12:12:43 AM »
Hold on doesn’t the G3 B\W only have PCI slots? The first card you linked is AGP.

Offline Sphere478

  • Newcomer
  • *
  • Posts: 7
  • New Member
Re: flashing + mods for various cards for os9 (9250, 9000, 7000)
« Reply #42 on: August 20, 2023, 03:24:55 PM »
Hold on doesn’t the G3 B\W only have PCI slots? The first card you linked is AGP.
mine is pci. 66mhz 32-bit and three or four 64-bit 33mhz slots