Recent Posts

Pages: 1 2 3 4 5 6 7 8 [9] 10
81
CPU Upgrades / Re: Mac Mini G4 Overclock just because its fun.
« Last post by Jubadub on April 08, 2024, 02:36:24 AM »
So OS9 works worse on Mini 10.2? for what reasons?

Whoever manufactures and converts to 7448 is "herd", great guy, he usually helps me with my questions. I have some interposers that he sent to me. I'm really grateful. Without a doubt, I managed to raise the current and voltage limit on my Mini thanks to his advice.

I'm just an amateur, a big head, as they say in Spain "Master of many trades, few benefits." In the early 2000s I played a lot with the G4s, I had a pioneering blog in my country and I did many overclocks and mods. But I have many other hobbies and I change depending on the moment or concerns.

Since I don't speak English very well (I use translate a lot) it is difficult for me to understand how to patch the Mini's firmware to be able to run a 7448. But the main problem is acquiring a 7448, I can't do it, I have tried many times and it never works good. So I am limited to the 7447@1667, of which I still have 3 or 4 units.

I only show these achievements so that everyone can do them, I don't do it for praise or anything. And I put it on my blog because this way I make sure that the information is not lost. In recent years I have tried to collect a lot of information that was on forums, but most of it has been lost, especially photos. My blog is a time capsule, everything is preserved there, and I have the photos hosted.

For now I can't get a 7448? Well, it will be someone else who achieves achievements, it doesn't matter, the important thing is that they are made known and everyone can try.

I go through the issues found in the "silent upgrade" + our current port of Mac OS 9 for minis in this comment.

I wonder if "herd" is the same guy, my source wasn't registered at the time we were working together. I would love to get some interposer boards from him, just in case I can somehow get Mac hardware in my current country shipped in, or physically brought in somehow.

For acquiring 7448, you need to pinpoint the exact vendors/users on EBay and the like that reliably source all kinds of processors. I gave my then-current list to my interposer buddy, and told him how to get them for the best prices. I forgot all the details by now, unfortunately, but what I can tell you is that if you keep on looking, and trying different sites/people, you will find them. Most of them come from misc. devices that surprisingly used the 7448, so they got desoldered and sold as is. Much more expensive units usually come from brand-new recently-manufactured sources, since the processor shockingly was still in production back then (circa 2021, no idea now). Preferably go for the processor with the highest binning, for maximum chances of overclocking, as detailed in one of my topics in MacRumors PPC.

If I could do it, you can do it, too. :) I understand your struggle with the language barrier, but trust me, "where there is a will, there is a way". I survived completely alone in Hungary for 9 months without knowing a single drop of Hungarian, and nearly no one there knew the languages I knew, yet I survived that whole period, and was able to communicate, and parse some Hungarian language with time... "To live and to learn", as they say!

Thank you for sharing your achievements! Like you said, it makes it easier for other people to try, and achieve the same. This includes me: I never modded or played around with the MDD anywhere near as much as I originally wanted to, and now I have no physical access to any MDD, but if by any chance I do someday, your findings will be of great help!
82
Software / Re: Blokz RAVE released
« Last post by Phlogios on April 08, 2024, 02:34:57 AM »
There is an expected performance degradation in the menu for 1.3 due to the added text. My text rendering code’s performance does not scale well at the moment. Performance optimizations will have to wait until I have solved the compatibility issues.
83
How can I get an installer with an option for Apple Partition Map with os9 driver installation option?

Some known options:

1. Connect the Mac that has the drive you want to format for OS 9 via FireWire Target Disk mode. Requires the target machine with the drive, and another machine to access OS X for you.

2. Simply use the command line version of disk utility instead, called "diskutil". There's an option you can pass to the program to install the OS 9 drivers. I think it was called "os9drivers"? You will have to look up the exact commands to use, though, I forgot how to use that tool, personally, but I know it can do the job for you.

3. Boot into OS 9 and format it from there, using the appropriate Unsupported Mac OS 9 installer for your machine.

The reason your OS X hides the option for you is because it thinks you can't boot into OS 9, so it hides the option from you. Which is why connecting your unsupported Mac via FireWire Target Disk Mode bypasses the problem, as well.

EDIT: For option 2, check out the thread linked by @joevt above. Specifically, check this comment, which shows you an example on how to format it via command line with OS 9 drivers.
84
Software / Re: Blokz RAVE released
« Last post by Jubadub on April 08, 2024, 02:05:42 AM »
Does anyone still have the older version 1.2? I would like to make some comparisons with it and the other versions.
85
Logic Audio by Emagic / Re: TDM Plugin Packages
« Last post by Knezzen on April 08, 2024, 01:41:01 AM »
It all works really well and can upload my Autoload if anyone wants it? I know Knezzen had some difficulty replicating this setup - as did I too, since the documentation is a right headache!

Resurrecting this thread again. Yes, it's a headache to say the least, but a very cool one (if that's even possible). Are you still with us acelera? I would love to get my hands on your Autoload file so I can try to replicate your Environment setup somehow.
86
Gear Zone for Musicians / Re: MDR-V6 vs K240 Studio for mastering?
« Last post by smilesdavis on April 08, 2024, 12:56:35 AM »
get the psbm4u1 (disc.) the best mixers and mastering engineers are particular to them
87
News, Information & Feedback / Login and password for download .dmg
« Last post by twrdwsk on April 07, 2024, 11:47:46 PM »
From link - https://macos9lives.com/smforum/index.php?topic=305.0 - storage site requests a login and password.
88
Software / Re: Blokz RAVE released
« Last post by Phlogios on April 07, 2024, 10:37:49 PM »
Thank you ovalking. What resolution are you running the game in? I had the opposite problem with the buttons and 1.3 fixed my issue… for some reason GetMouse() does not return actual screen coords in fullscreen and the range seems to vary between computers.

I haven’t figured out how to display the version number yet.
89
Storage / Re: finder crash on startup due to pci sata (sil3112)
« Last post by smilesdavis on April 07, 2024, 04:29:32 PM »
try and find the sonnet ones, they work plug and play.
90
Storage / Re: finder crash on startup due to pci sata (sil3112)
« Last post by chrisNova777 on April 07, 2024, 04:08:57 PM »
its a sawtooth G4 450mhz - says its got boot rom 4.2.8f1
powermac3,1

ive got the SSD on the ATA interface now, using a sata/ide adapter instead of the pci sata card
investigating a bit further trying to find out the real reason for the finder crash...

the pci sata cards i was using, i used a few different ones, an ACARD 6890m, the other two are SIL3112 cards that had their roms replaced to properly fit the firmware of the Seritek 1S2 that required a certain type + size of chip to fit. made for me by a friend from 68kMLA forum.
Pages: 1 2 3 4 5 6 7 8 [9] 10