Yes now that it boots the resolution has dropped to SXGA i think. I am using a VGA cable, I am wondering if there is a way to support the Asus LCD in Os9 however it is a 2011 TFT LCD. I also have an old VGA LCD that is a closer match in terms of vintage to the G4 I can use.
ASUS LCD specs are as follows:
SPECIFICATION
LCD Panel
TFT Color LCD
18.5” W ( cm)
0.3mm(H)x 0.3mm(V)
250cd/m2 (Typical)
12000000:1 Max (ACM) 170o(H)160o(V)(CR=10)/176o(H)176o(V)(CR=5)
5 ms (Typical)
R,G,B Analog Interface
30‐80KHz
55‐75Hz
Display Colors
16.7M Colors
Dot Clock
140MHz
Max. Resolution
1366x768@60Hz
Plug & Play
VESA DDCCI/DDC2B 11.94W(typ.)
Power consumption
@175cd/m 2
0.43W(typ.)
0.28W(typ.)
Input Connector
D-Sub
DVI-D 24pin (Only Dual-Input Model)
Input Video Signal
Analog:0.7Vp-p(standard), 75 OHM, Positive
Digital signal (Only Dual-Input Model)