Pages: [1] 2   Go Down

Author Topic: Look for Pro Tools 6.4.1 TDM  (Read 21573 times)

musovern

  • Newcomer
  • *
  • Offline Offline
  • Posts: 4
  • new to the forums
Look for Pro Tools 6.4.1 TDM
« on: October 16, 2014, 06:02:31 PM »

Could any one help me with getting a copy of Pro Tools 6 TDM or 6.4.1 TDM Plus serial number

Wanted to try this on my Powerbook G4 with Magma Expansion case.
« Last Edit: October 16, 2014, 11:36:30 PM by musovern »
Logged

supernova777

  • Guest
Logged

musovern

  • Newcomer
  • *
  • Offline Offline
  • Posts: 4
  • new to the forums
Re: Look for Pro Tools 6 TDM
« Reply #2 on: October 16, 2014, 06:54:11 PM »

Thank you have just download and  installed Pro Tools 6.4 TDM from the link you gave me just looking for a serial number now. Are you able to help with this.
Logged

Enabler

  • Enthusiast Member
  • ***
  • Offline Offline
  • Posts: 75
Re: Look for Pro Tools 6.4.1 TDM
« Reply #3 on: November 30, 2014, 05:08:00 AM »

Serial For ProTools 6.4.1 Mix Hardware Only

DIGI0600 1c2a000f 6723a196
Logged

supernova777

  • Guest
Re: Look for Pro Tools 6.4.1 TDM
« Reply #4 on: November 30, 2014, 05:23:07 AM »

i had helped him already via priv message but im sure that could help someone else.. enabler;)
Logged

Syn-Fi

  • Veteran Member
  • ****
  • Offline Offline
  • Posts: 151
  • Quadra 700, G4 MDD, Mac mini
Re: Look for Pro Tools 6.4.1 TDM
« Reply #5 on: February 18, 2018, 12:52:49 PM »

hi,
installed this on OSX 10.3.9
but all i get on launch is looking for digidesign h/w

I have a MixCore card in there which is working fine with Coreaudio drivers in 10.3.9 and separately in OS9

Do i have to install DAE too? if so, which version because i have tried 6 point something and it hasn't helped.

any pointers would be welcome
Logged

mrhappy

  • Platinum Member
  • *****
  • Offline Offline
  • Posts: 1156
  • new to the forums
Re: Look for Pro Tools 6.4.1 TDM
« Reply #6 on: February 18, 2018, 07:49:02 PM »


 all i get on launch is looking for digidesign h/w


Do you have an interface plugged into your mix core card?
Logged

Syn-Fi

  • Veteran Member
  • ****
  • Offline Offline
  • Posts: 151
  • Quadra 700, G4 MDD, Mac mini
Re: Look for Pro Tools 6.4.1 TDM
« Reply #7 on: February 19, 2018, 02:42:18 AM »

hi Mr Happy,
yes plugged in and switched on.

I'm using the mix core plus interface via Core Audio for Bias Peak. Passes all digitests too apart from TDM link - because i only have the one card in there at present.

Do i need to install a certain version of DAE?
Logged

mrhappy

  • Platinum Member
  • *****
  • Offline Offline
  • Posts: 1156
  • new to the forums
Re: Look for Pro Tools 6.4.1 TDM
« Reply #8 on: February 19, 2018, 08:04:19 PM »

Hey Syn-Fi... I'm not quite sure what you have going on there or what you're trying to accomplish but... normally for a PT setup you'd need at least a 'Core' card plugged into the computer... from there a cable going to an audio interface like a Digidesign 888 or similar for the program to function.

"I'm using the mix core plus interface"  I'm thinking that you might just have the 'core' card and no audio interface hooked up to it and that would explain why you get the 'looking for Digidesign hardware' message at launch... as there is none! ;D

Have a look through this... might clear up a few things.

http://akarchive.digidesign.com/support/docs/PT_6.4_Reference_Guide.pdf
Logged

Syn-Fi

  • Veteran Member
  • ****
  • Offline Offline
  • Posts: 151
  • Quadra 700, G4 MDD, Mac mini
Re: Look for Pro Tools 6.4.1 TDM
« Reply #9 on: February 25, 2018, 04:34:30 AM »

hi mr happy,
no the inferface, an 888, is definitely hooked up and it works in OSX with CoreAudio - so its definitely hooked up and working. It also works in OS9.

the problem i have, is that the interface is not seemingly picked up with Protools 6.4.1 and there is no obvious explanation given the above.

Note CORE audio is not running when i launch Protools 6.4.1 ...the CoreAudio app only launches when i use Bias peak and TDM h/w and interface.

Any further ideas?

looked at the reference guide already and given the H/w is working it is a software/config problem and thats why i have posted up here to see if anyone else has resolved it.
Logged

mrhappy

  • Platinum Member
  • *****
  • Offline Offline
  • Posts: 1156
  • new to the forums
Re: Look for Pro Tools 6.4.1 TDM
« Reply #10 on: February 26, 2018, 06:21:40 AM »

Hey Syn-fi... check which version of quick time you have.  Any version higher than 6.5.2 might not be compatible.
Logged

Syn-Fi

  • Veteran Member
  • ****
  • Offline Offline
  • Posts: 151
  • Quadra 700, G4 MDD, Mac mini
Re: Look for Pro Tools 6.4.1 TDM
« Reply #11 on: February 27, 2018, 07:12:42 AM »

hi, quicktime 6.4

this after installing 10.3 and then an update to take me to 10.3.9

thanks for looking into this for me.

i'm going to have another go at trying to figure this out soon
Logged

CMW

  • Active Member
  • *
  • Offline Offline
  • Posts: 11
  • I want to build an early-90s, pre-Mix system.
Re: Look for Pro Tools 6.4.1 TDM
« Reply #12 on: November 20, 2023, 08:03:48 PM »

Can someone post a download link here or in the downloads section? Pro Tools 6.4.1 is not available on the Digidesign site anymore.
Logged

AtariMan

  • Veteran Member
  • ****
  • Offline Offline
  • Posts: 107
Logged
Pro Tools TDM 5.1.1

ssp3

  • Platinum Member
  • *****
  • Offline Offline
  • Posts: 857
Re: Look for Pro Tools 6.4.1 TDM
« Reply #14 on: November 20, 2023, 08:49:39 PM »

I just love those single post, new members who immediately demand that they should be provided with whatever they come up with...
Not even "Hello, my name is ___, nice to meet you".

We're not only Apple tech support here, we're now doing Digi as well.
« Last Edit: November 21, 2023, 02:46:07 AM by ssp3 »
Logged
If you're not part of the solution, you're part of the problem.

smilesdavis

  • Platinum Member
  • *****
  • Offline Offline
  • Posts: 778
  • New Member
Re: Look for Pro Tools 6.4.1 TDM
« Reply #15 on: November 21, 2023, 04:56:31 AM »

Ignore the grumpy old men and tell us if you got it running
Logged
Looking for: Steinberg Cubase MAC Standard/Score/Audio v1-3 in box, Cubase Mac Score and Audio Dongles !! PM ME

CMW

  • Active Member
  • *
  • Offline Offline
  • Posts: 11
  • I want to build an early-90s, pre-Mix system.
Re: Look for Pro Tools 6.4.1 TDM
« Reply #16 on: November 21, 2023, 04:32:54 PM »

I just love those single post, new members who immediately demand that they should be provided with whatever they come up with...
Not even "Hello, my name is ___, nice to meet you".

We're not only Apple tech support here, we're now doing Digi as well.

My name is CMW. Hello Everyone! I'm a new member. :) I registered because I need help with early Pro-Tools TDM. Pleased to meet you.

http://secure.digidesign.com/services/avid/kb/downloads.cfm?digiArticleId=4956&localeCode=en

It appears Digidesign no longer hosts the installer on their site.  :-\

Ignore the grumpy old men and tell us if you got it running

Unfortunately not. Saw your posts in the thread titled Seeking Pro Tools 3.4.5.x TDM System Building Advice. Do you mind if I PM you questions about Pro Tools stuff from time to time? I tried to PM some other people, but now there's no record of my having sent the messages in my inbox. Maybe I didn't do it right... lol.

Logged

AtariMan

  • Veteran Member
  • ****
  • Offline Offline
  • Posts: 107
Re: Look for Pro Tools 6.4.1 TDM
« Reply #17 on: November 21, 2023, 07:20:52 PM »

You can download here Pro Tools 6.4.1 TDM, for Mac OS 10.3. You can update your system to 10.3.9, but do not update QuickTime or iTunes.
https://cloud.mail.ru/public/doCc/y8dt74qFG
Logged
Pro Tools TDM 5.1.1

chrisNova777

  • Veteran Member
  • ****
  • Offline Offline
  • Posts: 167
  • New Member
Re: Look for Pro Tools 6.4.1 TDM
« Reply #18 on: November 22, 2023, 09:45:38 AM »

there is a possibility the downloads have been temporarily disturbed on the digi download site..
maybe they are restructuring? who knows.. but ya thats alot of different downloads dissappearing overnight
someone might have to contact digidesign customer support and ask whats going on and what the intention is
Logged

CMW

  • Active Member
  • *
  • Offline Offline
  • Posts: 11
  • I want to build an early-90s, pre-Mix system.
Re: Look for Pro Tools 6.4.1 TDM
« Reply #19 on: November 23, 2023, 12:36:00 AM »

You can download here Pro Tools 6.4.1 TDM, for Mac OS 10.3. You can update your system to 10.3.9, but do not update QuickTime or iTunes.
https://cloud.mail.ru/public/doCc/y8dt74qFG

Thanks for the link, AtariMan!
Logged
Pages: [1] 2   Go Up
 

Recent Topics