Mac OS 9 Lives

Classic Mac OS Hardware => General Hardware Discussions => Topic started by: mailcty on April 16, 2019, 12:01:45 AM

Title: Mac mini G4 cooling solutions?
Post by: mailcty on April 16, 2019, 12:01:45 AM
I've recently decided to splurge on a used Mac mini G4 alongside some components to upgrade it a bit (1 GB RAM, a 128GB mSATA-to-IDE SSD, and most recently an Edirol UA-1EX USB audio interface), and while it does actually boot faster and perform better than before, I can't help but be concerned about how it cools itself. Being one of the silent upgrade models with the 1.5GHz G4 and such, I was hoping that Apple changed the minis enough to where their cooling system is acceptable if not more than so. However even if I play games as light as Diablo, SimCity 2000, or Stay Tooned on my mini G4, all through this site's 9.2.2 v8 (http://macos9lives.com/smforum/index.php/topic,4365.0.html) by the way, the fans raise to 100% to the point where the mini eventually powers off from what seems to be overheating. I did raise my mini with two CD cases in hopes that the vents below can cool better, but the fan and heat behavior remains when using both my OS 9 and OS X Leopard partitions. I even opened my mini up several times just to dust it enough to where it looked immaculate, yet I still get the fan/overheating after enough activity. At the very least, leaving the mini to idle doesn't lead to this issue right away yet and does help cool it after a few minutes of active use.

Upon further research (https://forums.macrumors.com/threads/mac-mini-g4-idle-fan-speed.2042902/) it seems that the mini G4 (https://discussions.apple.com/thread/755030) is actually notorious for having bad (https://forums.macrumors.com/threads/mac-mini-overheating-and-shutting-down.848854/) or loud cooling (https://forums.macrumors.com/threads/mac-mini-1-5ghz-fan-noise.1423399/), yet before I've done the RAM and SSD upgrades to my mini, the fan/overheating issue didn't happen as severely compared to now, which is a bit concerning. Reverting the RAM back to 512 MB certainly didn't lessen the chances of this happening, and I'm not interested in continuing to use the 80GB hard drive it came with. I could have low-key messed up in the process of disassembling it the first time but its hard to tell considering that several others have had the fan/heat issue without making any upgrades. I've heard that Mac hard drives have some sort of thermal controller built in them, hence why the mini G4 isn't so sure how to cool itself with the SSD? I'm not 100% sure on that though since that feature seems to have started with Intel Macs. But in terms of improving the cooling for the mini G4, I've heard that placing it vertically helps, or raising it enough to where the air has enough space to exit, but what about other tried-and-tested solutions? Reapplying the thermal paste often helps for any old computer (any guide out there specifically for the mini G4?), or maybe I just need to revert back to a Mac HDD. But seeing as others have had varied results with the mini G4's cooling and overheating then and now, what are some solutions which can fix this flaw of Mac mini G4 pretty well?

tl;dr - As many including myself have suffered from the fan/overheating Mac mini G4, what are some efficient solutions out there to fix or prevent this from happening often? Reapplying the thermal paste to the well-covered CPU? Just leave it standing vertically? Placing some ice below it? Not using it like a Power Mac?
Title: Re: Mini G4 cooling solutions?
Post by: FdB on April 16, 2019, 09:35:41 AM
G4 Minis run considerably cooler than the first Intel-based Minis. And… with an SSD installed in the G4 temps should be reduced - over those G4s with the standard HD. If the fan speed quickly goes to maximum and the mini shuts down, the processor probably needs new heatsink paste or you’ve some other heinous problem. (A thorough cleaning of all the blades on the fan’s squirrel-cage too, while you’re at it.)

Careful compression of the CPU’s heatsink’s four individual, black plastic, expansion “wing” mounts (on the backside of the motherboard) with small needle-nosed pliers… along with a slight pressure - pushing them one-at-a-time back through the mobo, releases the heat sink. (Mind those springs.) If careful, these original black plastic/nylon mounting shafts can be re-used. If not, then small nylon nuts & bolts from the hardware store can be used as replacements. Carefully remove, clean and replace the heatsink paste and then reassemble. It’ll run cooler and more stable.

The addition of four 1/8” thick rubber “bumper feet” to the bottom four corners of mini’s bottom pad increases overall air flow. Fans here in minis (ranging from the 1.25 to the 1.5) almost never run @ maximum RPM, nor are they ever noisy. The 1.52 here has an SSD… running cooler and quieter than those that do not… and none of them stand vertical.

Anyone else have a G4 mini that runs so hot that it shuts itself down?
Title: Re: Mac mini G4 cooling solutions?
Post by: mailcty on April 16, 2019, 11:50:58 PM
Just cleaned my mini G4's CPU and applied some new thermal paste to it, and it appears that this actually helped in Mac OS X. While the fan expectedly operates at its highest speed during a complete Xbench test, the mini surprisingly wasn't freaking out while playing a few minutes of Marble Blast Gold and in fact seemed to be decently cooling itself as its able to reach idle cooling much faster than before.

The startup disk chooser (when holding Alt-Option while powering on) and Mac OS 9.2.2 however seem to be pushing the fan pretty high still, even when playing Snood in OS 9. The system doesn't actually start cooling until I activate Sleeper's sleep mode. I also didn't continue long enough on Snood in case its actually wearing out the CPU and new thermal paste severely and am continuing to test other games and software in OS 9 on my mini G4.

Thanks for the suggestion either way FdB. Here's hoping this does work out in the long term.

Update #1 (4/17/19): Apparently the Carbonized build of Snood I have on Mac OS 9 runs the CPU and fan at near 100% in Leopard too? Weird. It seems that Mac OS 9 really likes maintaining the CPU at 100% in general after testing Stuffit extracting on the SSD, Black Shades, Maelstrom (the GPL'd PPC version), and SimCity 2000 for a while. No shutting down issues yet however, though I wish this can truly stay quiet on OS 9.

Update #2 (4/18/19): My re-pasted mini G4 finally auto-slept from the heat as I was downloading (via Leopard-WebKit) and extracting (via The Unarchiver) a few files on Leopard. For whatever reason the fan turned itself up for a bit while I left the mini to idle after waking up again. It took about an hour for my mini to reach to this point, by the way.
Title: Re: Mac mini G4 cooling solutions?
Post by: Ninester on April 18, 2019, 08:48:01 AM
My 1.5 mini spins right up when pushed with games. Five rubber stick on feet raise the bottom panel 3/8" off desk.  Big difference as, before,  the desktop was very warm after 2 hours of Descent 3, now only warm.  Mine has the ram and SSD upgrades with, somehow, losing a resistor for a speed bump...another rescue puppy from the bay. The fan noise from the mini gets totally drowned out when my QS DP-1Gz gets a full head of steam...

I had read that Jobs detested games on the early Macs.  Lol, someone may think of them as toys..
Title: Re: HOT Mini G4
Post by: FdB on April 19, 2019, 08:58:32 AM
“Update #2 (4/18/19): My re-pasted mini G4 finally auto-slept
from the heat as I was downloading (via Leopard-WebKit)
& extracting (via The Unarchiver) a few files on Leopard.”

[One of these days… I’ll get around to trying Leopard-WebKit.] ::)

Been informed on more than one occasion that the full cooling effects of
replacing paste takes time b4 fully-realized. (Break-in or burn-in period?)
This HOT mini has me wondering & I’d like to have a close-up look inside
or... actually get my hands on it. (Apple Hardware Test?)
Still, some-thing is amiss?

Ninester reports his overclocked(?) mini gits hot, with no shutdowns.
Methinks mailcty’s HOT mini might have other problems/causes…
as no one else here has reported such prollums?

“had read that Jobs detested games on the early Macs.”
Alas, poor Steve… "we knew ye well.” (Long live The Woz!)
Title: Re: Mac mini G4 cooling solutions?
Post by: mailcty on April 19, 2019, 09:18:29 PM
Just added four 7/8" rubber feet to each corners of my mini G4's bottom pad, and while the bottom seems to actually feel cooler than before I'm still getting the auto-sleep/shutdown issues, particularly when attempting to extract 400MB+ Stuffit files on both Mac OS X Leopard and OS 9.2.2, with the CPU maxing out at 100% according to Leopard's Activity Monitor. About to run the Apple Hardware Test on my machine in a bit so I'll be sure to leave another update on this post.

Update #3 (4/20/19): Managed to burn a disc of the Apple Service Diagnostic which includes support for the late 2005 mini G4, and while a single ASD test set completed as Passed and the log reports an Error Count of 0, which should mean my mini G4 is fine, it still turned itself off ater about 22 minutes of being left on. I wish I can save the log file but this is just weird now. Perhaps I'll need to open it up again for a close look for anything I've done wrong physically, but for now I'll play the waiting game.
Title: Re: Mac mini G4 cooling solutions?
Post by: Ninester on April 22, 2019, 04:57:19 AM
I posted the Mini service source PDF.  It recommends changing out the ATI Sil-pad when motherboard removed.  Something to try for people having overheating issues. Found one source of official sil-pads but of course, are not cheap.  Looking for a sheet of the correct thickness.

I'll measure mine which is now in pieces..it died, best guess is the PMU won't reset or dead.  When doing research, I found reports of G4 mini's, powerbooks and intel mini with same problem that was fixed with a motherboard change out.  No one mentioned "OC" as in mine :o

My next mini gets the full treatment..if I can keep it from looking in the little box, now on the floor...
Title: Re: Mac mini G4 cooling solutions?
Post by: mailcty on May 02, 2019, 09:56:44 PM
I posted the Mini service source PDF.  It recommends changing out the ATI Sil-pad when motherboard removed.  Something to try for people having overheating issues. Found one source of official sil-pads but of course, are not cheap.  Looking for a sheet of the correct thickness.

Any updates on where to find a replacement sil-pad? I'm convinced that this is my only issue with the Mac mini and am eager to fix this.
Title: Re: Mac mini G4 cooling solutions?
Post by: FdB on May 03, 2019, 08:23:38 AM
PM Ninester directly...

Found one source of official sil-pads but of course, are not cheap.
Title: Re: Mac mini G4 cooling solutions?
Post by: Ninester on May 06, 2019, 05:28:44 AM
I'll post these here for any others looking.  I used the 1mm sheet and cut to fit...

https://www.amazon.com/gp/product/B00UYTTXSM/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1
Title: Re: Mac mini G4 cooling solutions?
Post by: Roman78 on May 06, 2019, 06:03:36 AM
Is there any software for reading the CPU temperature or other sensors? I noticed mine mini blowing very hot air out the back while not doing much on it. I have a [email protected]. It is standing on top of a Core2Duo MacMini 1.1. The intel one is much cooler. I am running MacOS 9.2.2 on the G4 and OSX 10.4.11 on the Intel.

Title: Re: Mac mini G4 cooling solutions?
Post by: Ninester on May 06, 2019, 10:52:03 AM
Nope, no sensors other than what you might read from the HD.  I lost my 1.57 OC mini, so just replaced MB with another 1.42. The old board only lit up when playing 3D games like Descent 3, the new board only runs luke warm with full paste and pad with stock clocks. The old board did not get a repaste.. being lazy but never a shutdown or graphic glitches.

I do have a Fluke thermistor probe but unless we all have something alike to share temperatures, while doing same benchmark, not much use?  OC again, in future, when workbench clear...

FdB, I did switch from a  MS mouse to a noname mouse. No lockups at full boot..yet.  Found other posts blaming their MS mouse...
Title: Re: Mac mini G4 cooling solutions?
Post by: Roman78 on May 07, 2019, 12:17:57 AM
Strange, there are 2 or 3 sensors in that machine, but no software to read the information... hmmpppff...

Strangely i have a 1.42 Ghz Mini, but on the CPU is printed 1500. See Picture.



Title: Re: Mac mini G4 cooling solutions?
Post by: mailcty on May 07, 2019, 03:47:58 AM
Strange, there are 2 or 3 sensors in that machine, but no software to read the information... hmmpppff...

Apparently the Apple Service Diagnostic disc for the Mac mini G4 has the ability to either turn off or max out the machine's fans. Either its tricking the sensors at a very low level or its just merely switching them.

In regards to my 1.5GHz Mac mini G4, I've determined that it simply runs hot and just needs more time to really break its cooling in or it has some fault in the logic board. I went ahead with Ninester's way of replacing the ATI thermal pad and made sure nothing was obviously wrong with my machine before and after. Behavior is still the same, though the more I look into I realize that its dependent on the app/game's resource usage as would be expected, particularly since playing a little over 30 mins of Marble Blast Gold on Leopard doesn't end up forcing the mini to sleep, yet running Snood for 20 minutes on both Leopard and OS 9.2.2 and it'll (attempt in 9.2.2) sleep due to it using 100% of the CPU for whatever reason. My mini does get pretty warm though performance otherwise seems decent after repasting the CPU and replacing the GPU thermal pad.

Even though it seems I've hit a roadblock here I'd still like to thank FdB and Ninester for the help on my Mac mini G4. I'm convinced that repasting and getting a new thermal pad will help in the long term, even if I ultimately do replace my mini's logic board.
Title: Re: Mac mini G4 cooling solutions?
Post by: Ninester on May 07, 2019, 06:15:06 PM
Strange, there are 2 or 3 sensors in that machine, but no software to read the information... hmmpppff...

Strangely i have a 1.42 Ghz Mini, but on the CPU is printed 1500. See Picture.

Looks like mine!  I read your other post on this cpu. Someone said that Apple cheaped out on the mini but you can read temps on the G4 powerbook IIR.  My son's white intel macbook reports so many temp reading you get nauseated!
Title: Re: Mac mini G4 cooling solutions?
Post by: Ninester on May 07, 2019, 06:34:14 PM
Even though it seems I've hit a roadblock here I'd still like to thank FdB and Ninester for the help on my Mac mini G4. I'm convinced that repasting and getting a new thermal pad will help in the long term, even if I ultimately do replace my mini's logic board.

You plastic CPU stays are secure with the heat sink down flat?  I have not seen a 1.5 heat sink but curious if same size as the 1.42 and 1.25?
Title: Re: Mac mini G4 cooling solutions?
Post by: mailcty on May 07, 2019, 07:33:03 PM
You plastic CPU stays are secure with the heat sink down flat?  I have not seen a 1.5 heat sink but curious if same size as the 1.42 and 1.25?
The CPU heatsink is as fastened as it should be. (https://i.imgur.com/Mom6k8n.png) I figured the image is too large to be on this post, and sorry for the low quality as its sourced from a video recording of me going through the thermal pad replacement process.
Title: Re: Mac mini G4 cooling solutions?
Post by: Ninester on May 08, 2019, 07:26:46 AM
You plastic CPU stays are secure with the heat sink down flat?  I have not seen a 1.5 heat sink but curious if same size as the 1.42 and 1.25?
The CPU heatsink is as fastened as it should be. (https://i.imgur.com/Mom6k8n.png) I figured the image is too large to be on this post, and sorry for the low quality as its sourced from a video recording of me going through the thermal pad replacement process.

That should be your heatsink on ppg. 52 in the mini service now that I compared to your pic. Definitely a difference.  I had posted pictures of my rescue QS CPU's way back. They were stir fried but still ticking.  Hopefully someone with a true 1.5 will chime in for any like experiences?
Title: Re: Mac mini G4 cooling solutions?
Post by: Ninester on May 08, 2019, 02:53:09 PM
Went ahead and bumped the 1.42 to 1.5 today.  Maybe 1.57 in the future. No heating issues with 3D games in 9.2 or running Tiger version of chess.

I can only add that Tiger and 9.2 were clean installs...

Also...using a temp probe in the right side of exhaust vents; when temperatures ramp up to 124F, the fan begins to ramp up to medium(?) then temps back down to 117F depending on load. When all is at idle, maybe 102F with fan very slow.
Title: Re: Mac mini G4 cooling solutions?
Post by: Roman78 on May 24, 2019, 11:15:16 AM
I made a picture while doing some CPU-Benchmarks. Im gonna make some when doing more work on it, or while playing games.##

Title: Re: Mac mini G4 cooling solutions?
Post by: Ninester on May 25, 2019, 08:40:47 AM
I made a picture while doing some CPU-Benchmarks. Im gonna make some when doing more work on it, or while playing games.##

This could be useful if person(s) having temp issues could also have the means to post readings...so trivial on later machines, no?
Title: Re: Mac mini G4 cooling solutions?
Post by: Roman78 on May 28, 2019, 04:14:55 AM
Just used an old early 2000 CaseMod display with 3 temperature sensors and connected those to the Mini. One directly into the CPU Cooler, 2nd one on the bottom plate near GPU and one near the fan intake (ambient temperature). In my quick test i noticed the CPU is not the hottest in normal operation. The bottom plate and the ambient temperature reached 40°C in a couple of minutes.

So the HDD, GPU and Chipset may be causing the heat. Maybe an SSD upgrade could reduce the temp a little. Removing the bottom rubber and install some bigger plate could also be an option, an ugly one indeed.

When i was modding my MacMini 1.1 i came with the idea to use the Alu frame as Cooler, but faild to get that done.
Title: Re: Mac mini G4 cooling solutions?
Post by: Ninester on June 08, 2019, 03:43:11 PM
Just used an old early 2000 CaseMod display with 3 temperature sensors and connected those to the Mini. One directly into the CPU Cooler, 2nd one on the bottom plate near GPU and one near the fan intake (ambient temperature). In my quick test i noticed the CPU is not the hottest in normal operation. The bottom plate and the ambient temperature reached 40°C in a couple of minutes.

So the HDD, GPU and Chipset may be causing the heat. Maybe an SSD upgrade could reduce the temp a little. Removing the bottom rubber and install some bigger plate could also be an option, an ugly one indeed.

When i was modding my MacMini 1.1 i came with the idea to use the Alu frame as Cooler, but faild to get that done.

Nice probe work, lol.  That poor mini might be a bit sore...I had thought of getting one similar for my gaming box but no heat issues with old i5 and GTX 970.

I have SSD in the Mini...they get warm when worked but nothing like my 3.5 spinners!

Thinking about what you found with bottom plate temps... I tried out this: Laptop Cooler -  https://www.amazon.com/Belkin-CoolSpot-USB-Powered-Cooling-F5L055btBLK/dp/B00GLBI2IY/ref=pd_rhf_dp_s_cr_simh_0_8?_encoding=UTF8&pd_rd_i=B00GLBI2IY&pd_rd_r=c7bd6d34-434a-4985-a9be-5e3b7598ec3a&pd_rd_w=A3LYb&pd_rd_wg=GMOzr&pf_rd_p=67aa5820-8762-4202-90ba-881bb99c913c&pf_rd_r=HRYPBYD0GQPPY2B8WAC3&psc=1&refRID=HRYPBYD0GQPPY2B8WAC3

Wow, bottom plate cool to touch with air inside vent at 44 C after 1 hour of Quake 2 demo repeating for an hour. Ambient at 33 C with fan running medium?  Fan speed based on sound of full on speed with last dead mini. I have errands so will let the demo continue to repeat to heat soak the mini..

No temp changes but now finding fan speed may be sensed off the bottom plate, not the CPU.  Turned off the laptop cooler fan, bottom plate heats up, vent temp drops 2 C, faster running fan? I cannot hear or feel any fan speed changes but curious just the same. The fan is three wire so will check out the old fan header when time permits.
Title: Re: Mac mini G4 cooling solutions?
Post by: superchill on August 03, 2019, 07:50:12 AM
Not sure if this has been mentioned yet, but is the fan oriented correctly? Had a similar issue happen to me when I did a SSD upgrade and it started shutting off from overheating because I didn't have the fan exaust pointing toward the back of the case when I reassembled the mini :-[
Title: Re: Mac mini G4 cooling solutions?
Post by: mailcty on November 06, 2019, 10:30:18 PM
Not sure if this has been mentioned yet, but is the fan oriented correctly?

It turns out that putting the fan the wrong way was the problem on my end too. My Mac mini runs like a charm now. I can't believe I overlooked something so embarrassingly simple.
Title: Re: Mac mini G4 cooling solutions?
Post by: IIO on November 06, 2019, 11:08:19 PM
will an EVO 840 fit into the mini? or is that considered a thick one?
Title: Re: Mac mini G4 cooling solutions?
Post by: mailcty on November 06, 2019, 11:29:11 PM
will an EVO 840 fit into the mini? or is that considered a thick one?
As long as it's the mSATA version of any EVO SSD, it should be able to work fine with an mSATA-to-IDE adapter.
Title: Re: Mac mini G4 cooling solutions?
Post by: IIO on November 07, 2019, 12:21:05 AM
of course. :(

for a second i´ve lost that the G4 has only IDE. (i also have several core2duos)

my 44 pin to m2 case is definetly too thick btw. those adapters without case should fit better.

and m2 is too pricey for my application. or are there 128 gb ones which you can buy second hand?

sry for OT
Title: Re: Mac mini G4 cooling solutions?
Post by: mrhappy on November 07, 2019, 06:11:30 AM
Not sure if this has been mentioned yet, but is the fan oriented correctly?

It turns out that putting the fan the wrong way was the problem on my end too.

That's a good tip superchill and something to watch out for! ;D
Title: Re: Mac mini G4 cooling solutions?
Post by: mailcty on November 07, 2019, 07:23:35 PM
are there 128 gb ones which you can buy second hand?

eBay has a bunch of secondhand mSATA SSDs from Samsung that have worked fine in my experience thus far. Although it seems more modern SSDs know how to work with systems without TRIM support, it's best to go with the 60-90% rule to be safe making partitions for older OSes like 9 and X (before the last version of Snow Leopard at least).
Title: Re: Mac mini G4 cooling solutions?
Post by: soviet9922 on November 09, 2019, 04:40:21 PM
make a hole on the top and add a big 8" fan that will shure fix your issue.
Title: Re: Mac mini G4 cooling solutions?
Post by: Rainier on February 23, 2020, 04:58:37 PM
My newly acquired 1.42 has a mangled and torn plastic air-flow guide. It's thin sheet plastic, glued in place, and directs air down toward the exhaust vents.
Anyone have a complete, un-torn, not mangled version and, if so, might you trace it and scan/photograph and post for replication at my end?
My fan soon is at full RPM, not quite 747 volume; maybe a twin jet Lear, but it's loud. I'll try replacing the CPU paste as well, but the venting is clearly not focused and that probably adds to the problem.
Title: Re: Mac mini G4 cooling solutions?
Post by: FdB on February 23, 2020, 08:18:53 PM
Didn't want to do the dishes anyway... ;)

Download following image files:

(http://macos9lives.com/smforum/index.php?action=dlattach;topic=4925.0;attach=7252;image)

(http://macos9lives.com/smforum/index.php?action=dlattach;topic=4925.0;attach=7254;image)
Title: Re: Mac mini G4 cooling solutions?
Post by: mrhappy on February 24, 2020, 08:40:15 AM
ah nice... a little 'FurryDaGomi"! ;D
Title: Re: Mac mini G4 cooling solutions?
Post by: IIO on February 24, 2020, 07:20:34 PM
origami
Title: Re: Mac mini G4 cooling solutions?
Post by: Rainier on February 25, 2020, 09:54:36 AM
Origami indeed!
Thanks for the template! That's fantastic and I'll use my always clumsy unhandyman hands to fabricate my own. Grateful for your help. FDB.

As for the cooling. I cleaned the heat sink and applied fresh paste. No change. But I understand it sometimes takes a few hours running for things to settle in.
I'm wondering if my kludged heat guide, made of paper card stock, is warping as I assemble the mini's two halves and it winds up blocking more than directing the air.

Mouse: cured? no. Better? yes. I was in a computer recycling store in south Seattle last week (3 hours away so I don't get there very often) They had some Mac stuff, but no one button mice. I have two mice with cords, none are Apple, and I suspect that's part of the problem. so I'll keep after that. I did program a function key to shut down and another to restart, so when the mouse freezes I don't have to power off to regain control.

What I really want is a KVM that actually works. I've tried a cheap eBay off-brand with my Intel Mini on one side, the G4 Mini on the other. Keyboard (Apple aluminum 101 Key) and monitor (Samsung S27C230) sharing worked a treat. Mouse was a mess on the G4 side. Tried variations like plugging the mouse directly into the G4: frequent freezing.

My monitor has a DVI and a VGA input, so one machine now uses DVI the other VGA and each its own keyboard and mouse. My desk is a mess and changing monitor inputs involves accessing the monitor menu and a bunch of key pressing. Tedious but doable. I know introducing a new topic—KVM—is bad form... BUT: if anyone has experience with one that works melding old and new, I welcome input.

THANKS again, guys!
Title: Re: Mac mini G4 cooling solutions?
Post by: xc68000 on August 22, 2021, 09:32:36 AM
Not sure if this has been mentioned yet, but is the fan oriented correctly?

It turns out that putting the fan the wrong way was the problem on my end too. My Mac mini runs like a charm now. I can't believe I overlooked something so embarrassingly simple.

Amazing, i've been troubleshooting my thermal shutdown issues for 3 days now, and this ended up being my problem too.