Mac OS 9 Lives
Digital Audio Workstation & MIDI => Digital Audio Workstations & MIDI Applications => Pro Tools by Digidesign => Topic started by: LoFizle on November 28, 2018, 02:03:28 PM
-
Anyone know, if a Digi Mix Core and a SampleCell can be used together with out the need of a digi interface?
The manual doesn’t really touch on this. Says the Sample cell i/o show up in the digi I/o, but it says nothing about if you still need a interface.
Although it mentions haveing a two track tdm system?
Thanks
-
pretty sure the samplecell can be used on its own
two track tdm? is probably referring to audiomedia card?
-
Yeah... not sure about Sample Cell but to make use out of a Mix system you'll need an interface hooked up.
-
samplecell has direct outs on the back bracket of the card itself -- 4 x stereo 1/4" as far as i know
-
I know the SampleCell can be used by itself, and that it has 1/4 ins and outs. An I know the mix system needs a interface, but I’m wondering if the inface can be side stepped if the SampleCell is connected to the mix core with the tdm bridge.
Anybody have a Mixcore and sample cell they would be willing to test this theory. Basically just unplug the digi interface and see if it still works?
-
Unfortunately No.......
SampleCell has 8 outputs 4 Stereo Pairs using a Ring, Tip sleeve cable
In order to send those outputs to a Mix system you would need a TDM Piggyback board
that was sold separately back in the day. Think of the piggy back board as a Digital Out like on
your favorite hardware sampler. It only worked in one direction sending the SampleCells
output Digitally to a Protools Mix TDM Bus.
-
Happy holidays enabler