Classic Mac OS Software (Discussions on Applications) > Logic Audio by Emagic

TDM Plugin Packages

(1/5) > >>

Syntho:
I don't know the history of this too well but apparently Emagic released a few different plugins and plugin packages for TDM compatibility. One was called EPIC, and another one called Host Enabler or something, and probably something else. Emagic seems to have dropped most TDM stuff unexpectedly once OSX hit and they went to Apple.

Apparently you could run Space Designer and ESX24 on TDM hardware, but inside of Logic. Another way you could do it was to actually run those plugins inside of Pro Tools. That's why I think there were multiple plugin versions and plugin packages.

Anyone have more info on this? I mainly just want to get Space Designer and EXS24 running on the DSP chips inside of Logic, but it wouldn't hurt to have those two running on the DSP chips in PT either.

Protools5LEGuy:
To my knowledge there is no TDM plugs from eMagic.
 There are "wrappers" for using then "inside logic" and connecting them with direct connect to protools.
 When you load Logic you choose to run it "rewire mode" but with other name, maybe direct tdm or tdm bridge. Or no audiohardware. I did it with Digi 001 and Logic 5-6
 That's the way with LE systems at least to get space designer, exs24, evp73 and es1.
My demo from epic run out. Don't know.
Logic support TDM hardware to run, but uses no dsp to plugs. Maybe I am wrong

Protools5LEGuy:
I was wrong ...
ESB is the only(?) For logic 9 TDM info... https://documentation.apple.com/en/logicpro/tdmguide/Logic%20Pro%209%20TDM%20Guide%20%28en%29.pdf
For Audiosuite whitin logic (?) http://www.sweetwater.com/sweetcare/articles/processing-logic-5-audio-tracks-audiosuite-tdm/
2006 Logic TDM plugin thread DUC http://duc.avid.com/showthread.php?t=158011
Logic TDM group http://www.logic-users-group.com/forums/forumdisplay.php?f=52
Using ESB (logic 9)http://documentation.apple.com/en/logicpro/tdmguide/index.html#chapter=3%26section=3%26tasks=true


The only info bout Logic 5 http://comments.gmane.org/gmane.comp.audio.emagic.logic.tdm/10933

Enabler:
Emagic Epic TDM plugin suite runs on ProTools TDM hardware
You will need an White Apple XSKey to run these.......

TDM hardware support is included up until Logic Pro 9.1.5 Intel/PPC
Unfortunately the TDM plugins were dropped during the switch to Intel processors :-[
The Epic TDM plugins can be used up to Logic Pro 7.2.3 on a PPC Mac only
You need the OSX installers for that. I did not upload them as this is a OS9 forum
but if anyone needs them let me know.

You get 15 of the Logic Plugins:

01) Autofilter
02) BitCrusher
03) Clip Distortion
04) Distortion
05) Ensemble
06) Ensemble 5 Voice
07) Enveloper
08) Modulation Delay
09) Overdrive
10) Phase Distortion
11) Phaser
12) Spectral gate
13) Sub Bass
14) Tape Delay
15) Tremolo

Attached is a Picture showing Ensemble using the DSP chip in ProTools.
Also works with Logic as the Host too. Also attached are the installer files verion 1.0 & 1.1 update

Enabler:
Emagic Host TDM Enabler runs the virtual Intruments on your Mac's CPU but sends the Audio stream to TDM mixer via DirectConnect where it can be mixed & processed with the rest of your ProTools Session.
You will need an White Apple XSKey to run these.......

Unfortunately the Host TDM Enable were dropped during the switch to Intel processors
The Host TDM Enabler can be used up to ProTools 7.4.2 on a PPC Mac only
You need the OSX installers for that. I did not upload them as this is a OS9 forum
but if anyone needs them let me know.

You get 5 of the Logic Virtual Intruments:

1) ES-1
2) ES-2
3) EVP-88
4) EVD-6
5) EVB-3

Attached is a Picture showing ES-2 using DirectConnect on the DSP chip in ProTools.
This is for ProTools 5.1.3. Also attached are the installer files verion 1.0 & 1.1 update

Note 1:
You will need the latest version of DirectConnect installed 5.1.1cs10
Attached as well. You will need to manually move the updated files to your system folder & DAE plugins folder
Be sure to remove the older versions as the name of the files are different.

Note: 2:
Space Designer may have been added to the TDM Enabler as an update when Logic Pro 7 came out
It's for OSX only...... sorry folks. I cannot confirm as I don't have an OSX setup to test this.

Note 3:
This is for ProTools 5.1.3 Users on OS9 and does nothing for Logic

Navigation

[0] Message Index

[#] Next page

Go to full version