Hello,
This is my first post here, so I hope I get this right. I recently bought a Power Macintosh G3 Beige Desktop (rev1, 128mb ram, 266mhz g3), and I've been trying to install a Sandisk 120GB SSD, but I keep having troubles. Firstly, I had troubles with the jumpers (though that problem has been fixed), but now I can't get the system to boot to the SSD at all (CDs work fine and setup reads the drive and installs mac os 8.5 and 9, it just won't boot). I've tried switching the connector the SSD was on, changing jumpers, and using multiple different OS CDs, but to no avail, I just get a floppy disk icon at boot. In my searches in this forum, I found a post saying that the system won't boot to a partition that's bigger than 8GB, but the old hard drive will boot just fine (120GB IDE HDD, partitioned into two 55gb partitions). I'm at my wit's end to what could be the issue, so if anyone could help me with this that would be greatly appreciated.
Thanks!
edit: just adding here that my adapter is a Startech IDE to SATA