Author Topic: ATI Rage Pro 128 will not work under OS 9 or 10.4  (Read 3925 times)

Offline wnlewis

  • Enthusiast Member
  • ***
  • Posts: 40
  • new to the forums
ATI Rage Pro 128 will not work under OS 9 or 10.4
« on: August 11, 2019, 06:22:01 PM »
I just bought a Rage Pro 128 card 630-2906 to replace one with a failing fan. The fan on the new card spins up but there does not seem to be any signal to the monitor. I tried it under 9.2.2 and also under 10.4.11 (separate partitions for each). The other numbers on the card are: TM9450DE5GHQA. Then on another sticker is: (01)727419630010(21)01945 07790. P/N 1026300101 013593. The ROM has a sticker with R128P 63001 (that is identical to the older card0.

Any advice?


Offline darthnVader

  • Moderator
  • Platinum Member
  • *****
  • Posts: 679
  • New Member
Re: ATI Rage Pro 128 will not work under OS 9 or 10.4
« Reply #1 on: August 13, 2019, 04:09:41 AM »
Seems like a dead card, check any capacitors for signs of leakage.

macStuff

  • Guest
Re: ATI Rage Pro 128 will not work under OS 9 or 10.4
« Reply #2 on: August 13, 2019, 10:34:45 AM »
sure it wasnt flashed to PC?