Author Topic: OS 9 and SeriTek/1eSE2 Sata card trouble  (Read 645 times)

Offline sruchris

  • Member
  • Posts: 4
  • new to the forums
OS 9 and SeriTek/1eSE2 Sata card trouble
« on: June 25, 2019, 08:15:56 AM »
My G4 Quicksilver recognizes my SeriTek/1eSE2 card but when I connect a drive to it the drive doesn't mount. Using OS X, the drive mounts fine. It is a driver problem? I reflashed the firmware on the card and nothing changed.

Offline macStuff

  • Platinum Member (500+ Posts)
  • *****
  • Posts: 1398
  • http://www.OldschoolDAW.com
    • OldschoolDAW.com
Re: OS 9 and SeriTek/1eSE2 Sata card trouble
« Reply #1 on: June 25, 2019, 08:57:55 AM »
what version of firmware are u running on the card? (viewable in system profiler)
is the drive already hfs+ ?
what partition type? MBR? APM? GUID?

you may to format the drive with "os9 drivers" possibly;

if it was me i would try with a blank drive to format the drive ont he computer u are going to use it with; and see how it goes from there



« Last Edit: June 25, 2019, 09:28:25 AM by macStuff »

Offline Jakl

  • Gold Member (200+ Posts)
  • *****
  • Posts: 323
Re: OS 9 and SeriTek/1eSE2 Sata card trouble
« Reply #2 on: June 28, 2019, 01:08:35 PM »
I have a 1eSe2 as well and the only time I have experienced a HD not being recognised is when I try to use a current SSD in os9 like a Samsung 860 etc. These cards are macos9 bootable off the shelf that is with an appropriate SSD or HD and formatting.