Classic Mac Hardware (Troubleshooting, Upgrading, & Modifying) > DAW - Digital Audio Workstation (Audio Interfaces & MIDI Hardware)

8ch adat slaves

<< < (4/6) > >>

supernova777:
another one to add is the 880 A/D and 880 D/A that go with the soundlink DRS system by KORG


http://web.archive.org/web/19990128183947/http://www.korg.com/sndlnk4.htm

mrhappy:
The OS 9 ProTools uses the 'ADAT Bridge' (16 channels of ADAT communication ) to integrate these interfaces/ mixers and whatnot.

supernova777:

--- Quote from: mrhappy on April 05, 2015, 12:14:47 AM ---The OS 9 ProTools uses the 'ADAT Bridge' (16 channels of ADAT communication ) to integrate these interfaces/ mixers and whatnot.

--- End quote ---

http://www.oldschooldaw.com/forums/index.php?topic=970.0

supernova777:
http://www.pcrecording.com/wcpci.htm

another converter is the tango 24 by frontier design circa 1996-1998



--- Quote --- Tango24 Specifications

    8 analog I/O, 24-bit, 48kHz (Crystal CS4390 Inputs/CS5360 Outputs)
    1/4" TRS jacks, jumper selectable +4dBu or -10dBV levels
    Switchable input/output level meters
    ADAT optical in/out/thru
    Internal (44.1 or 48 kHz) and external clock modes
    Frequency response: +/- 0.05 dB, 20Hz-20kHz
    Dynamic range: 105 dB A-weighted
    THD+N: 0.002%
    115 dB signal-to-noise-ratio
    1U Rack-mountable external converter box

--- End quote ---

supernova777:
http://www.soundonsound.com/sos/mar04/articles/apogee.htm
apogee rosetta





at first u think its annoying that this needs db25 breakout cables.. but it eliminates the possibility of screwed up trs socket/ports

Navigation

[0] Message Index

[#] Next page

[*] Previous page

Go to full version