Author Topic: Midi Sequencer for beige g3 233 with 96meg  (Read 754 times)

Offline widdly

  • Enthusiast
  • **
  • Posts: 26
  • Beige G3, Alchemy, Turbosynth, Sounddiver, K2000r
Midi Sequencer for beige g3 233 with 96meg
« on: January 12, 2018, 03:59:01 PM »
Hi all,

I recently picked up a beige g3 machine.  I've got it hooked up via scsi to a Kurzweil K2000 and have Alchemy to edit samples.  I using a Studio 64x midi interface and Sounddiver to edit patches on the kurzweil, an ensoniq DP4 and a DX7.  It all works very nicely.

Now I am thinking a midi sequencer.  I don't think the machine is powerful enough for audio.  Any recommendations for a midi only sequencer that would work well with this setup?

Offline macStuff

  • Platinum Member
  • *****
  • Posts: 833
  • www.oldschooldaw.com
    • www.oldschooldaw.com
Re: Midi Sequencer for beige g3 233 with 96meg
« Reply #1 on: January 14, 2018, 08:27:48 PM »
tons of possibilities
take your pick!

performer 5.5
vision 2.08
studio vision pro v4.x
digital performer v3.x
logic v3.x 
cubase v3.x
aka chrisNova777 aka superNova777 aka geforceG4 | >>> http://www.oldschooldaw.com

Offline widdly

  • Enthusiast
  • **
  • Posts: 26
  • Beige G3, Alchemy, Turbosynth, Sounddiver, K2000r
Re: Midi Sequencer for beige g3 233 with 96meg
« Reply #2 on: January 21, 2018, 06:44:24 PM »
Thanks MacStuff.  I'll give logic v3 a try.  I assume it integrates with Sounddiver.

Offline GaryN

  • Platinum Member
  • *****
  • Posts: 871
  • active member
Re: Midi Sequencer for beige g3 233 with 96meg
« Reply #3 on: January 21, 2018, 09:18:39 PM »
Thanks MacStuff.  I'll give logic v3 a try.  I assume it integrates with Sounddiver.
DON't………EVER……ASSUME……ANYTHING!