Author Topic: Installing Wifi on a Power Macintosh 9600  (Read 271 times)

Offline Canned Brain

  • Active Member
  • **
  • Posts: 19
  • Complaint Point of the Galactic Confederation
Installing Wifi on a Power Macintosh 9600
« on: September 07, 2017, 02:11:04 PM »
Dear Mac Fellows,

Quick and easy question requesting a quick and easy answer:

Is there any way to install Wifi compatibility on a 9600/200 Power Macintosh?

Thank you in advance,
Canned Brain
"If liberty means anything at all, it means the right to tell people what they do not want to hear."
(George Orwell)

Offline GaryN

  • Platinum Member
  • *****
  • Posts: 681
  • active member
Re: Installing Wifi on a Power Macintosh 9600
« Reply #1 on: September 07, 2017, 06:12:31 PM »
Sorta, but the answer is NOT quick or easy.
A wireless ethernet "bridge" / adapter will do it
So will a PCI wi-fi card (if you can find one that's not PCI-express AND that the Mac will actually recognize)

BUT

Mac OS9 and below will not support modern wi-fi encryption.

By the time you locate, purchase, return, purchase again something that will actually work, downgrade your router encryption (if possible) and actually get it working, you'll wish you had just run a damn wire - seriously, run a wire, it's worth it.

Offline Canned Brain

  • Active Member
  • **
  • Posts: 19
  • Complaint Point of the Galactic Confederation
Re: Installing Wifi on a Power Macintosh 9600
« Reply #2 on: September 07, 2017, 11:50:00 PM »
Thank you for your advice!

I'm just wondering about the following on the topic of "Bridge":

Of course, the signal between Router and Bridge is encrypted. But the PM won't be connected to Wifi. It would be connected to an Ethernet port. Is the signal that leaves the Ethernet port of a Bridge still encrypted?
« Last Edit: September 08, 2017, 12:01:00 AM by Canned Brain »
"If liberty means anything at all, it means the right to tell people what they do not want to hear."
(George Orwell)

Offline ovalking

  • Consistant Contributor
  • ***
  • Posts: 61
  • new to the forums
Re: Installing Wifi on a Power Macintosh 9600
« Reply #3 on: September 08, 2017, 12:40:02 AM »
Yes, I'd use an ethernet to wireless adapter if I wanted to do this.
The OS doesn't need to know anything about wireless then.

One problem might be finding one that can be configured with Mac OS.

Offline Canned Brain

  • Active Member
  • **
  • Posts: 19
  • Complaint Point of the Galactic Confederation
Re: Installing Wifi on a Power Macintosh 9600
« Reply #4 on: September 08, 2017, 12:50:00 AM »
Could I solve that by configuring the Wifi connection via a modern computer and then simply connect the Ethernet cable to the old Mac?
"If liberty means anything at all, it means the right to tell people what they do not want to hear."
(George Orwell)

Offline ovalking

  • Consistant Contributor
  • ***
  • Posts: 61
  • new to the forums
Re: Installing Wifi on a Power Macintosh 9600
« Reply #5 on: September 08, 2017, 02:16:45 AM »
Sure. With the one I've used you set it up to connect to a specific router via the web GUI. After that you can move it around clients as and when needed.