Author Topic: Wanted: PCI SATA card for my G4  (Read 18034 times)

Offline Knezzen

  • Administrator
  • Platinum Member
  • *****
  • Posts: 975
  • Pro Tools Addict!
    • Macintosh Garden
Wanted: PCI SATA card for my G4
« on: September 22, 2016, 10:30:29 AM »
Hi!

Looking to kit one of my G4's with a SATA SSD, so I'm
In the market for a SATA PCI card for it.

A Sil3112 card or anything that works with Mac OS 9 will do just fine :)
Pro Tools addict and admin at Macintosh Garden, Mac OS 9 Lives! and System 7 Today

Offline geforceg4

  • Platinum Member
  • *****
  • Posts: 535
  • i did my time on mac os 9
Re: Wanted: PCI SATA card for my G4
« Reply #1 on: September 22, 2016, 12:19:19 PM »
macos9-bootable or non bootable?


Offline Knezzen

  • Administrator
  • Platinum Member
  • *****
  • Posts: 975
  • Pro Tools Addict!
    • Macintosh Garden
Re: Wanted: PCI SATA card for my G4
« Reply #2 on: September 22, 2016, 12:40:42 PM »
Mac OS 9 bootable :)
Pro Tools addict and admin at Macintosh Garden, Mac OS 9 Lives! and System 7 Today

Online DieHard

  • Global Moderator
  • Platinum Member
  • *****
  • Posts: 2367
Re: Wanted: PCI SATA card for my G4
« Reply #3 on: September 22, 2016, 10:45:12 PM »
Knez... I thought you were leaving the OS9 arena and moving on ?

Well, it's good to see you still have a use for it :)

Offline geforceg4

  • Platinum Member
  • *****
  • Posts: 535
  • i did my time on mac os 9

Offline Knezzen

  • Administrator
  • Platinum Member
  • *****
  • Posts: 975
  • Pro Tools Addict!
    • Macintosh Garden
Re: Wanted: PCI SATA card for my G4
« Reply #5 on: September 24, 2016, 01:34:06 AM »
Knez... I thought you were leaving the OS9 arena and moving on ?

Well, it's good to see you still have a use for it :)

We had to move on in the studio, but I took the MDD home and made it my main machine. Trying to really max it out now and since I won't be using TDM hardware at home I can stick a SATA card in it :)

FirmTek only gives out international shipping costs through email and I haven't heard back from them yet.

MacTron, if you see this; where did you buy your SeriTek card? If you bought it directly from FirmTek, how much did you pay for shipping?
Pro Tools addict and admin at Macintosh Garden, Mac OS 9 Lives! and System 7 Today

Offline MacTron

  • Global Moderator
  • Platinum Member
  • *****
  • Posts: 2116
  • keep it simple
Re: Wanted: PCI SATA card for my G4
« Reply #6 on: September 24, 2016, 03:19:51 AM »
MacTron, if you see this; where did you buy your SeriTek card? If you bought it directly from FirmTek, how much did you pay for shipping?
I have two of them ( I only use hardware that I have duplicate - at least- :) )
The first one (SeriTek/1eVE2+2 ) was bought in OWC. It cost me around 100 EURO ( the favored  exchange rate paid for the shipping and taxes few years ago )
The second one (SeriTek/1V4) was buyed in eBay from an EU user. And it cost me around 100 EURO also (inc. shipping) .
Despite it cost, I think this is a very valuable piece of harware.
Please don't PM about things that are not private.

Offline Knezzen

  • Administrator
  • Platinum Member
  • *****
  • Posts: 975
  • Pro Tools Addict!
    • Macintosh Garden
Re: Wanted: PCI SATA card for my G4
« Reply #7 on: September 24, 2016, 03:49:33 AM »
Buying from FirmTek is a no-go. Just got an email from them saying that none of the PCI and PCI-X cards are available for purchase from them anymore :(.

Guess I have to keep a lookout on eBay for them.
Is the PCI-X Sonnet Tempo cards any good? Are they bootable with Mac OS 9?
Pro Tools addict and admin at Macintosh Garden, Mac OS 9 Lives! and System 7 Today

Offline MacTron

  • Global Moderator
  • Platinum Member
  • *****
  • Posts: 2116
  • keep it simple
Re: Wanted: PCI SATA card for my G4
« Reply #8 on: September 24, 2016, 04:19:49 AM »
Is the PCI-X Sonnet Tempo cards any good? Are they bootable with Mac OS 9?
No. AFAIK.
Please don't PM about things that are not private.

Offline Knezzen

  • Administrator
  • Platinum Member
  • *****
  • Posts: 975
  • Pro Tools Addict!
    • Macintosh Garden
Re: Wanted: PCI SATA card for my G4
« Reply #9 on: September 24, 2016, 11:40:46 AM »
Correction! Seems like they still have some SeriTek/1eVE2+2 cards left, so get one while you can! Im sure going to.

The other cards are sold out though, at least at FirmTek.
Pro Tools addict and admin at Macintosh Garden, Mac OS 9 Lives! and System 7 Today

Offline geforceg4

  • Platinum Member
  • *****
  • Posts: 535
  • i did my time on mac os 9
Re: Wanted: PCI SATA card for my G4
« Reply #10 on: September 24, 2016, 03:49:30 PM »
u are forgetting a good number of threads here where there was very valuable information shared re: programming eproms + making your own version of the seritek card using the exact same firmware
as well as other versions of mac compatible sata cards that were discovered + that info was shared here publicly

also the fact that there was a user from england who ran an FTP of mac os drivers + apps who offered to produce/solder SIL3112 cards with the firmware + proper type of ROM chip to achieve this.
these cards are of course only 2 port instead of 4 like the seritek firmtek ones. but they work just the same in regards to bootability + throughput

Offline Knezzen

  • Administrator
  • Platinum Member
  • *****
  • Posts: 975
  • Pro Tools Addict!
    • Macintosh Garden
Re: Wanted: PCI SATA card for my G4
« Reply #11 on: September 24, 2016, 10:21:42 PM »
I'm fully aware that I could flash a generic Sil3112 to work with my MDD, but I can't. I don't have any PCs that I can use and I'd rather spend the money on something that just works rather then spend a lot of my time trying to flash something that don't.

I contacted that "person from England" but haven't gotten any answer from him/her yet.
Pro Tools addict and admin at Macintosh Garden, Mac OS 9 Lives! and System 7 Today

Offline geforceg4

  • Platinum Member
  • *****
  • Posts: 535
  • i did my time on mac os 9
Re: Wanted: PCI SATA card for my G4
« Reply #12 on: September 24, 2016, 10:36:04 PM »
I'm fully aware that I could flash a generic Sil3112 to work with my MDD, but I can't. I don't have any PCs that I can use and I'd rather spend the money on something that just works rather then spend a lot of my time trying to flash something that don't.

I contacted that "person from England" but haven't gotten any answer from him/her yet.


im guessing for less than half the price of a 1v4 seritek u could get 2 or 3 from max


Offline max1zzz

  • Enthusiast Member
  • ***
  • Posts: 32
  • new to the forums
Re: Wanted: PCI SATA card for my G4
« Reply #13 on: September 26, 2016, 02:29:31 PM »
I'm that "Person for England" :)

I can still produce the cards for anyone who wants them, Just PM me (I don't visit here very often, But I do read my emails so if you PM me I will respond, just it may take a couple of days)

Lead time on them will be around 2 weeks as I have to order the cards in from china

Edit: The cards have got much harder to find! I'm seeing one sensible priced listing on aliexpress, and non on eBay (at least that are sold as sil3112 ones). I can still get them but anyone who wants one should let me know now

Offline Knezzen

  • Administrator
  • Platinum Member
  • *****
  • Posts: 975
  • Pro Tools Addict!
    • Macintosh Garden
Re: Wanted: PCI SATA card for my G4
« Reply #14 on: September 26, 2016, 11:43:41 PM »
I want one!
Pro Tools addict and admin at Macintosh Garden, Mac OS 9 Lives! and System 7 Today

Offline max1zzz

  • Enthusiast Member
  • ***
  • Posts: 32
  • new to the forums
Re: Wanted: PCI SATA card for my G4
« Reply #15 on: September 27, 2016, 10:23:42 AM »
Allrighty, Anyone else want one? i'll order a few cards towards the end of the week and produce some more

Offline geforceg4

  • Platinum Member
  • *****
  • Posts: 535
  • i did my time on mac os 9
Re: Wanted: PCI SATA card for my G4
« Reply #16 on: September 27, 2016, 10:24:45 AM »
nice one max cheers

Offline Knezzen

  • Administrator
  • Platinum Member
  • *****
  • Posts: 975
  • Pro Tools Addict!
    • Macintosh Garden
Re: Wanted: PCI SATA card for my G4
« Reply #17 on: September 27, 2016, 10:29:10 AM »
Do you know what the price will be? Let me know and i'll paypal you asap :)
Pro Tools addict and admin at Macintosh Garden, Mac OS 9 Lives! and System 7 Today

Offline Philgood

  • Gold Member
  • *****
  • Posts: 411
Re: Wanted: PCI SATA card for my G4
« Reply #18 on: September 27, 2016, 11:13:09 AM »
Me too here. Get me two!
*G4 MDD 1.25GHz (Single 2003)* with 2x 80Gb harddrives, 1Gb RAM, Tascam US-428 and Edirol FA-101 USB/Firewire soundcards-*iMac G3 DV 400MHz* with installs from OS 8.6-OSX Tiger on different harddrives-*Powerbook G4 1.67Ghz* with new SSD ! Love it.

Offline MacTron

  • Global Moderator
  • Platinum Member
  • *****
  • Posts: 2116
  • keep it simple
Re: Wanted: PCI SATA card for my G4
« Reply #19 on: September 27, 2016, 12:12:07 PM »
Allrighty, Anyone else want one? i'll order a few cards towards the end of the week and produce some more
I have two of the max1zzz cards. I can testify that work great, and max1zzz is a "fully recommended seller"  :D and with very good customer support.  ;D
Please don't PM about things that are not private.