Author Topic: Behringer UFO202 not playing nicely  (Read 5073 times)

Offline Steve_W

  • Enthusiast Member
  • ***
  • Posts: 91
  • 88 MPH
    • UK Mac Files
Behringer UFO202 not playing nicely
« on: July 07, 2016, 01:27:04 PM »
Supposedly this is plug & play in OS 9.0.4 and above.  I plug it in, boot the mac, open Logic (4.8.1) and the device cannot be seen as a choice in the audio hardware section.

Any ideas? I'm stuck! Thanks!!
Powermac MDD dual 1.25ghz (9.2.2/10.4.11)/Powermac MDD 867mhz (9.2.2)/12 inch Powerbook G4 (9.2.2)/15 inch Powerbook G4 (10.4.11)/Powermac G5 (10.7.5)

Offline GaryN

  • Platinum Member
  • *****
  • Posts: 1566
  • active member
Re: Behringer UFO202 not playing nicely
« Reply #1 on: July 07, 2016, 03:06:34 PM »
You need an ASIO driver. There is one included on the CD-ROM that came with the unit. It needs to go in the Logic ASIO folder or at least somewhere where Logic will find it. Check the Logic docs if there's no ASIO folder.

Offline Steve_W

  • Enthusiast Member
  • ***
  • Posts: 91
  • 88 MPH
    • UK Mac Files
Re: Behringer UFO202 not playing nicely
« Reply #2 on: September 11, 2016, 06:23:17 AM »
OK great many thanks I'll try that!
Powermac MDD dual 1.25ghz (9.2.2/10.4.11)/Powermac MDD 867mhz (9.2.2)/12 inch Powerbook G4 (9.2.2)/15 inch Powerbook G4 (10.4.11)/Powermac G5 (10.7.5)


Offline Steve_W

  • Enthusiast Member
  • ***
  • Posts: 91
  • 88 MPH
    • UK Mac Files
Re: Behringer UFO202 not playing nicely
« Reply #4 on: September 16, 2016, 12:38:49 PM »
Thanks guys I'll follow this up when I get into it on Sunday, cheers!
Powermac MDD dual 1.25ghz (9.2.2/10.4.11)/Powermac MDD 867mhz (9.2.2)/12 inch Powerbook G4 (9.2.2)/15 inch Powerbook G4 (10.4.11)/Powermac G5 (10.7.5)