driver for usa-28x keyspan twin adapter

[supernova777]

reposted from another thread for ease of access

http://web.archive.org/web/20020612053926/http://keyspan.com:16080/products/usb/usa28x/downloads/KeyspanUSA28Xv19.sit.bin

this is a direct link to download the driver that nickmt had success with for the keyspan usa-28x usb-serial adapter, this driver is only for the specific usa-28x version with two ports "twin"

link taken from this page:
http://web.archive.org/web/20020602003944/http://keyspan.com:16080/downloads/
archived in june of 2002

this device can be used instead of a stealth port for connectivity to serial midi devices from motu, opcode, etc

this page is worth a look :
http://message-pad.no-ip.org/html/index.html
discusses it working within the classic environment aswell

user manual can be viewed here:
http://www.digitalaudio.dk/media/7User_manual_Keyspan_USA-28X.pdf

[Opcode]

Cool, I just ordered one of these bad boys. Got a couple G4s just collecting dust that I might be able to give a life

[GaryN]

One oddity you may or may not run into…the USA extension will sometimes hang at startup due to other activity on the USB buss. This is rare but can drive you nuts until you figure it out. For example, my Epson printer (which is in a different USB port then the Keyspan) must nevertheless be turned off during startup. Why? Who knows, but it happens.

[Opcode]

thanks for the heads up, I'll make sure to clean out unused extensions. Don't expect to be using them for anything else than MIDI.

[Opcode]

Spotty with either studio 5 & 28x or 28x-b.

MOTU MIDI TPAV is working ;(