it is a program from 1996.. when system 7 was still being used..
but would it work with mac os 8.6 + 9.2 ??there may be a possibility it requires 7.x
7.5.3 January 1, 1996 Power Macintosh 5400
7.5.3 Revision 2 May 1, 1996
7.5.3 Revision 2.1 August 7, 1996 Macintosh Performa 6400
7.5.3 Revision 2.2 August 7, 1996 Power Macintosh 9500/200, Performa 6360
7.5.5 September 27, 1996 Power Macintosh 5500
looks like os 7.5.x was current at the time of its release
i was able to find the following requirements info:
System Requirements and Recommendations:
Macintosh II or better with 8 meg of RAM or greater and System 7.0.1, 7.1, 7.5.1, & 7.5.2, 7.5 and 7.6 will work fine, hard disk, and optional interface. (We do not recommend System 7.5.3 or 7.5.3 rev 2, and any shared port Mac's, the powerbook 190 and the powerbook 5300 -- these models were not intended for midi use and require a lot of trouble-shooting).
anyone know the last macs to be able to boot system 7??
7.5 or 7.6 apparently works....
this can be my front end editor for sampling on my s950 sampler!
and it can transfer files over midi aswell (slow but works ok for drum sounds)