G4 single 1.33 Ghz 2Mb of L3...

[IIO]

hm i just looked it up, the mdd should have only 1 mb per processor. but you will tell me soon.

[IIO]

hehe it is even worse, one can not make up any rule, its even different for the fw800 models:

167 MHz Bus speed:
1.0 GHz dual w 1 MB cache (each processor) from Fw 400 model
1.25 GHz dual w 2 MB cache (each processor) from Fw 400 model
1.25 GHz dual w 1 MB cache (each processor) from Fw 800 model
1.42 GHz dual w 2 MB cache (each processor) from Fw 800 model
1.25 GHz single w 1 MB cache from "education only" 2003 model

[supernova777]

we need a facepalm emoticon

[MacTron]

ah, seei have no idea about MDDs, i dont use them. but didnt you state above that the processor from the xserve would be on top because it has more?

... more than any other single CPU for the MDD.

that it doesnt support OS9 by default.

Remove the original CPU, place the 1.42 and restart.

Thas't what I have done with a MDD (and with Mac Os 9, of course)
... so simple and trouble less.

might be something which can keep people away from using such a configuration. you know how hard it is to unattach a IDE disk´s power cable!

May be you have some confussion with Uninorth 1.x G4 machines (from Sawtooth to QuickSilver)

About MDD's I hope  this can help:

[MacTron]

Hey Mactron.. 2 quick notes

Thank You. I'll keep on trying with those suggestions...
I'm planning to open a BIG tread called "NI and the fu****g DFD" LOL

[IIO]

May be you have some confussion with Uninorth 1.x G4 machines (from Sawtooth to QuickSilver)

nah, i´ve just hijacked your thread and discussed possible DP configurations 

and no, i dont trust any charts, not even my own or those from apple, there was more than one model from apple which looked different between US and europe, and that can cause quite some confusion.

[supernova777]

Now I'm doing a few test with an improved cooling and it is going a bit better...

MacBench 3.0 passed, It is promising...

how exactly is this fan attached?

[MacTron]

how exactly is this fan attached?

It is not attached, by now...

[kwiatki75]

...
would anyone have a photo of the voltage regulator settings for single 1.33Ghz from Xserve?

i found for a Dual processors but for single not.

[Tabo]

http://oldcomputer.info/apple/PowerMDD/index.htm

I'm using 1.33ghz Xserve cpu(single) overclocked to 1.58ghz. My core voltage is 1.65v.

[kwiatki75]

Big Thanks.
Overclocked my g4 1.33 single to 1.5 Ghz (Voltage 1.60) and it's working now;-)

[Tabo]

I replaced IDE HDD to the Intel SSD (530 series / 120 GB) , it works GREAT, too